A Torx-Plus drive has more points of contact than a hex drive, allowing you to tighten these screws with less slippage or damage to the recess.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

Serrations under the head grip the material's surface for mild vibration resistance. The flange distributes pressure across the material's surface, eliminating the need for a washer.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

Made from 18-8 stainless steel, these metric pan head screws have good chemical resistance and may be mildly magnetic.

These steel pan head screws are coated for corrosion resistance.

With a narrower head than pan head screws, these cheese head screws fit in tight spaces, such as in electrical panels and next to flanges and raised surfaces.

Made from alloy steel, these screws are three times stronger than standard steel button head Torx screws. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. Their tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

Twice as strong as low-strength steel screws, these screws are suitable for fastening most machinery and equipment.

Comparable in strength to Grade 9 screws, these are about 20% stronger than high-strength steel screws and often used in heavy duty applications, such as stamping and earth-moving equipment. The flange eliminates the need for a washer.

These Grade 5 steel screws are over 70% stronger than our stainless steel wire-lockable hex head screws. Wire these screws together through the hole in the head to get more vibration resistance than any other screw.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These metric screws have good chemical resistance and may be mildly magnetic.

These metric alloy-steel screws are twice as strong as standard steel Torx flat head screws.

Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part.

Made from alloy steel, these screws are nearly twice as strong as stainless steel flat head screws.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. A nylon locking element grips threads to resist loosening.

Made from black-oxide alloy steel, these set screws resist corrosion in dry environments. They dig into hard surfaces for a secure hold and have serrations on the cup edge that grip the material surface to resist loosening.

The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These alloy steel set screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them set screws on soft surfaces such as aluminum.

These metric set screws have a brass tip, which is harder than nylon and silver, for a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

Made of alloy steel, these set screws are often used in U-shaped and V-shaped grooves and on other sloped or angled surfaces. The oval tip allows for frequent adjustments with minimal surface damage.

Use the square head to turn these screws by hand, or use a wrench when you need more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Also known as full dog-point set screws, the tip is twice as long as the tip on other extended-tip set screws for greater engagement in deep mating holes.

These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

A wide tip provides more gripping power than standard swivel-tip set screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

These steel screws are available with corrosion-resistant finishes.

A free-rotating, permanently attached washer distributes holding pressure over a wider area than a flange and remains stationary to prevent scratching the material surface as you tighten the screw.

These steel screws have a black-oxide finish to resist corrosion in dry environments.

A decorative rounded top provides a finished appearance.

18-8 stainless steel screws have good chemical resistance.

These steel screws are beveled under the head for use in countersunk holes.

These steel screws have corrosion-resistant finishes.

Screws are beveled under the head for use in countersunk holes.