Thread Size Thread Size |
|---|
Material Material |
|---|
|
Finish Finish | Show |
|---|
|
Finish Finish | Hide |
|---|
Press-Fit Head Shape Press-Fit Head Shape |
|---|
 | Round |
For Minimum Panel Thickness For Minimum Panel Thickness |
|---|
|
For Use In For Use In |
|---|
|
Drill Bit Size Drill Bit Size |
|---|
PEM® Part Number PEM® Part Number |
|---|
|
|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Body Type Body Type |
|---|
 | Sleeve |
Thread Direction Thread Direction |
|---|
 | |
Specifications Met Specifications Met |
|---|
|
About Nuts, Materials, and Finishes
More
About Washers
More
Steel Press-Fit Nuts for Soft Metal and Plastic
Also known as broach style captive nuts, press these nuts into a drilled or punched hole in plastic and soft metal with an arbor press or similar pressure tool. Installation requires access to both sides of the panel. Knurls on the bottom of the nut hold them firmly in place. A tin plating provides corrosion resistance to chemicals and salt water.
Press-Fit Nuts | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Head | Installation Tool | |||||||||
| Size | Pitch | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | Each | ||
Tin-Plated Steel | |||||||||||
| 2-56 | __ | No. 26 | 0.06" | 0.21" | 0.07" | KF2-256 | 50 | 000000000 | 000000 | 000000000 | 0000000 |
| 4-40 | __ | No. 19 | 0.06" | 0.21" | 0.07" | KF2-440 | 50 | 000000000 | 00000 | 000000000 | 000000 |
| 6-32 | __ | No. 3 | 0.06" | 0.28" | 0.07" | KF2-632 | 50 | 000000000 | 00000 | 000000000 | 000000 |
| 8-32 | __ | 1/4" | 0.06" | 0.34" | 0.1" | KF2-832 | 25 | 000000000 | 0000 | 000000000 | 000000 |
| 10-24 | __ | I | 0.06" | 0.38" | 0.13" | KF2-024 | 25 | 000000000 | 00000 | 000000000 | 000000 |
| 10-32 | __ | I | 0.06" | 0.38" | 0.13" | KF2-032 | 25 | 000000000 | 0000 | 000000000 | 000000 |
Metric Tin-Plated Steel | |||||||||||
| M2 | 0.4 mm | 3.7 mm | 1.53mm | 5.56mm | 1.5mm | KF2-M2-ET | 25 | 000000000 | 0000 | 000000000 | 000000 |
| M2.5 | 0.45 mm | 4.2 mm | 1.53mm | 5.56mm | 1.5mm | KF2-M2.5-ET | 25 | 000000000 | 0000 | 000000000 | 000000 |
| M3 | 0.5 mm | 4.2 mm | 1.53mm | 5.56mm | 1.5mm | KF2-M3-ET | 25 | 000000000 | 0000 | 000000000 | 000000 |
| M4 | 0.7 mm | 6.4 mm | 1.53mm | 8.74mm | 2mm | KF2-M4-ET | 25 | 000000000 | 0000 | 000000000 | 000000 |
| M5 | 0.8 mm | 6.9 mm | 1.53mm | 9.53mm | 3mm | KF2-M5-ET | 25 | 000000000 | 00000 | 000000000 | 000000 |
Stainless Steel Low-Profile Rivet Nuts
The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals. They're often used for light duty fastening in low-clearance applications. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. The tin-plating provides lubricity allowing the nut to collapse smoothly. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts can be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Rivet Nuts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body | Flange | Hand-Driven Tools | Mandrels | ||||||||||||
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | Each | Each | |||
Tin-Plated 18-8 Stainless Steel | |||||||||||||||
| 4-40 | 3/16" | 0.030" to 0.090" | Sleeve | 0.19" | 0.355" | 0.175" | 0.211" | 0.015" | 1 | 000000000 | 00000 | 000000000 | 000000 | 000000000 | 000000 |
| 6-32 | 7/32" | 0.030" to 0.090" | Sleeve | 0.22" | 0.355" | 0.175" | 0.24" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 8-32 | 1/4" | 0.030" to 0.090" | Sleeve | 0.25" | 0.355" | 0.175" | 0.269" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 10-24 | 9/32" | 0.030" to 0.090" | Sleeve | 0.28" | 0.355" | 0.175" | 0.306" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 10-32 | 9/32" | 0.030" to 0.090" | Sleeve | 0.28" | 0.355" | 0.175" | 0.306" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 1/4"-20 | 3/8" | 0.030" to 0.090" | Sleeve | 0.37" | 0.5" | 0.245" | 0.4" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 1/4"-28 | 3/8" | 0.030" to 0.090" | Sleeve | 0.37" | 0.5" | 0.245" | 0.4" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 5/16"-18 | 1/2" | 0.030" to 0.090" | Sleeve | 0.5" | 0.6" | 0.295" | 0.528" | 0.015" | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-16 | 9/16" | 0.030" to 0.090" | Sleeve | 0.56" | 0.73" | 0.360" | 0.588" | 0.015" | 1 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
| 3/8"-24 | 9/16" | 0.030" to 0.090" | Sleeve | 0.56" | 0.73" | 0.360" | 0.588" | 0.015" | 1 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 00000 |
Rivet Nuts | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Body | Flange | Hand-Driven Tools | Mandrels | ||||||||||||
| Size | Pitch, mm | Drill Bit Size | For Material Thick. | Type | Dia., mm | Lg., mm | Installed Lg., mm | Dia., mm | Thick., mm | Pkg. Qty. | Pkg. | Each | Each | |||
Tin-Plated 18-8 Stainless Steel | ||||||||||||||||
| M3 | 0.5 | 4.8 mm | 0.030" to 0.090" | Sleeve | 4.8 | 9 | 5.124 | 5.36 | 0.4 | 1 | 000000000 | 00000 | 000000000 | 000000 | 000000000 | 000000 |
| M4 | 0.7 | 6.4 mm | 0.030" to 0.090" | Sleeve | 6.3 | 9 | 5.124 | 6.83 | 0.4 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| M5 | 0.8 | 7.1 mm | 0.030" to 0.090" | Sleeve | 7.1 | 9 | 5.124 | 7.77 | 0.4 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| M6 | 1 | 9.5 mm | 0.030" to 0.090" | Sleeve | 9.5 | 12.7 | 6.924 | 10.16 | 0.4 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| M8 | 1.25 | 12.7 mm | 0.030" to 0.090" | Sleeve | 12.7 | 15.2 | 8.224 | 13.41 | 0.4 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
| M10 | 1.5 | 14.3 mm | 0.030" to 0.090" | Sleeve | 14.3 | 18.5 | 9.824 | 14.94 | 0.4 | 1 | 000000000 | 0000 | 000000000 | 00000 | 000000000 | 00000 |
Mil. Spec. Washers
Choose these washers for their adherence to strict military standards for material and construction.
Copper and brass washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Tin-plated brass washers have a decorative finish that protects the brass and prevents oxidation.
For technical drawings and 3-D models, click on a part number.
| For Screw Size | ID | OD | Thick. | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Tin-Plated Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
AN961 | ||||||||
| No. 4 | 0.125" | 0.312" | 0.022"-0.042" | Rockwell B60 | AN961-4T | 50 | 000000000 | 00000 |
| No. 6 | 0.149" | 0.375" | 0.022"-0.042" | Rockwell B60 | AN961-6T | 50 | 000000000 | 0000 |
| No. 8 | 0.174" | 0.375" | 0.022"-0.042" | Rockwell B60 | AN961-8T | 50 | 000000000 | 00000 |
| No. 10 | 0.203" | 0.438" | 0.022"-0.042" | Rockwell B60 | AN961-10T | 50 | 000000000 | 00000 |
| 1/4" | 0.265" | 0.500" | 0.054"-0.074" | Rockwell B60 | AN961-416T | 25 | 000000000 | 0000 |
| 5/16" | 0.328" | 0.562" | 0.054"-0.074" | Rockwell B60 | AN961-516T | 25 | 000000000 | 00000 |
| 3/8" | 0.390" | 0.625" | 0.054"-0.074" | Rockwell B60 | AN961-616T | 25 | 000000000 | 00000 |
| 1/2" | 0.515" | 0.875" | 0.054"-0.074" | Rockwell B60 | AN961-816T | 10 | 000000000 | 0000 |
| 5/8" | 0.640" | 1.188" | 0.054"-0.074" | Rockwell B60 | AN961-1016T | 10 | 000000000 | 00000 |