Choose these screws for their adherence to strict military standards for material and construction.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Cleaned and double bagged in an ISO Class 5 (Fed. Std. Class 100) clean room, these screws are ready to use on chambers and components in high-vacuum systems.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Use these low-profile screws where space is limited.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

With a head one and a half times taller than a standard socket head, these screws are easier to install in deep counterbored holes and other hard-to-reach places.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a thread locker to resist vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

Stainless steel screws have excellent corrosion resistance in most environments. They have a split lock washer to create tension and resist loosening from vibration.

A rubber O-ring under the head of these screws prevents leaks and seals out contaminants.

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

No need for separate bits—these screws lock directly onto square‐drive socket wrenches, reducing the risk of dropping parts during installation.

The nonmarring brass tip is electrically conductive and harder than nylon, but soft enough to conform to most surfaces and reduce damage from metal-on-metal contact.

Comparable to Class 12.9 steel.

With threads the same diameter as the shoulder, these inch-sized screws can handle heavy loads. They’re comparable to Grade 8 steel.

These shoulder screws come with a traceable lot number and material test report. Similar in strength to Grade 8 steel.

These screws have metric thread sizes. They are 18-8 stainless steel for good chemical resistance.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water. These screws have inch thread sizes.

Shoulder screws made of 17-4 PH stainless steel are nearly twice as strong as 18-8 stainless steel and have the same corrosion resistance. These screws have inch thread sizes.

One-third the weight of steel, aluminum shoulder screws are lightweight and have good corrosion resistance.

Nickel alloy shoulder screws are more resistant to acids and salt water than stainless steel shoulder screws.

These metric screws have a head height that's about two-thirds the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

These have a head height about one-third the head height of a standard shoulder screw.

These shoulder screws have good chemical resistance.

A locking element on the threads adds friction to resist loosening. Comparable to Grade 8 steel, these alloy steel shoulder screws are the strongest we offer.

With a shoulder that’s twice as precise as standard shoulder screws, these metric shoulder screws act as a shaft or axle for bearings and other moving parts in applications that require smooth and accurate movement, such as measuring and lab equipment. Made of 18-8 stainless steel, they’re nearly as strong as steel but won’t rust in outdoor or washdown environments.

Made of 416 stainless steel, these shoulder screws are almost twice as strong as 18-8 stainless steel and have the same corrosion resistance.

These metric 316 stainless steel shoulder screws are more corrosion resistant than 18-8 stainless steel shoulder screws. They also have excellent resistance to chemicals and salt water.

Brass shoulder screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These screws have a head height about one-third the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.