McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    46 Products

    Headless Clevis Pins

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Headless Clevis Pins.
    Since these pins secure at either end, you can add and remove parts without having to take the pin all the way out. They’re commonly used with rod ends, hydraulic cylinders, and other pivoting components. Slide a cotter pin into each hole to keep them in place.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Lg.
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    3/16" Diameter
    3/4"-0.002" to 0.000"5/64"Rockwell B801 1/8"00000000000000
    1"-0.002" to 0.000"5/64"Rockwell B801 3/8"0000000000000
    1 1/4"-0.002" to 0.000"5/64"Rockwell B801 5/8"0000000000000
    1 1/2"-0.002" to 0.000"5/64"Rockwell B801 7/8"0000000000000
     
    1/4" Diameter
    1/2"-0.002" to 0.000"7/64"Rockwell B807/8"0000000000000
    3/4"-0.002" to 0.000"5/64"Rockwell B801 1/8"0000000000000
    1"-0.002" to 0.000"5/64"Rockwell B801 3/8"0000000000000
    1 1/4"-0.002" to 0.000"5/64"Rockwell B801 5/8"0000000000000
    1 1/2"-0.002" to 0.000"5/64"Rockwell B801 7/8"0000000000000
    2"-0.002" to 0.000"7/64"Rockwell B802 3/8"0000000000000
     
    5/16" Diameter
    3/4"-0.002" to 0.000"7/64"Rockwell B801 1/8"0000000000000
    1"-0.002" to 0.000"7/64"Rockwell B801 3/8"0000000000000
    1 1/4"-0.002" to 0.000"7/64"Rockwell B801 5/8"0000000000000
    1 1/2"-0.002" to 0.000"7/64"Rockwell B801 7/8"0000000000000
     
    3/8" Diameter
    3/4"-0.002" to 0.000"5/32"Rockwell B801 1/4"0000000000000
    1"-0.002" to 0.000"7/64"Rockwell B801 3/8"0000000000000
    1 1/4"-0.002" to 0.000"7/64"Rockwell B801 5/8"0000000000000
    1 1/2"-0.002" to 0.000"7/64"Rockwell B801 7/8"0000000000000
    1 3/4"-0.002" to 0.000"5/32"Rockwell B802 1/4"0000000000000
    2"-0.002" to 0.000"7/64"Rockwell B802 3/8"0000000000000
    2 1/4"-0.002" to 0.000"5/32"Rockwell B802 3/4"0000000000000
    2 1/2"-0.002" to 0.000"7/64"Rockwell B802 7/8"0000000000000
    3"-0.002" to 0.000"7/64"Rockwell B803 3/8"0000000000000
     
    1/2" Diameter
    1"-0.002" to 0.000"9/64"Rockwell B801 1/2"0000000000000
    1 1/4"-0.002" to 0.000"9/64"Rockwell B801 3/4"0000000000000
    1 1/2"-0.002" to 0.000"9/64"Rockwell B802"0000000000000
    1 3/4"-0.002" to 0.000"5/32"Rockwell B802 1/4"0000000000000
    2"-0.002" to 0.000"9/64"Rockwell B802 1/2"0000000000000
    2 1/4"-0.002" to 0.000"5/32"Rockwell B802 3/4"0000000000000
    2 1/2"-0.002" to 0.000"9/64"Rockwell B803"0000000000000
    2 3/4"-0.002" to 0.000"5/32"Rockwell B803 1/4"0000000000000
    3"-0.002" to 0.000"9/64"Rockwell B803 1/2"0000000000000
    3 1/2"-0.002" to 0.000"5/32"Rockwell B804"0000000000000
    4"-0.002" to 0.000"5/32"Rockwell B804 1/2"0000000000000
     
    3/4" Diameter
    2"-0.002" to 0.000"5/32"Rockwell B802 3/4"00000000000000
    2 1/2"-0.002" to 0.000"5/32"Rockwell B803 1/4"00000000000000
    2 3/4"-0.002" to 0.000"5/32"Rockwell B803 1/2"00000000000000
    3"-0.002" to 0.000"5/32"Rockwell B803 3/4"00000000000000
    3 1/2"-0.002" to 0.000"5/32"Rockwell B804 1/4"00000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Lg.
    Each
    18-8 Stainless Steel with Cotter Pin
     
    3/16" Diameter
    11"-0.005" to 0.004"5/64"Rockwell B8012"000000000000000
     
    1/4" Diameter
    11"-0.004" to 0.004"5/64"Rockwell B8012"00000000000000
    15"-0.004" to 0.004"5/64"Rockwell B8016"00000000000000
     
    5/16" Diameter
    11"-0.005" to 0.004"7/64"Rockwell B8012"00000000000000
     
    3/8" Diameter
    11"-0.004" to 0.004"7/64"Rockwell B8012"00000000000000
     
    1/2" Diameter
    11"-0.004" to 0.004"5/32"Rockwell B8012"00000000000000
    15"-0.004" to 0.004"5/32"Rockwell B8016"00000000000000
     
    back to top