About Installing Blind Rivets
More
Aluminum Domed Head Blind Rivets
Made of aluminum, these blind rivets are lightweight and corrosion resistant. The domed head gives your project a finished appearance.
Use these blind rivets to fasten hinges, shelves, or other assemblies where you can only access one side. They’re also commonly used to join metals that are difficult to solder or weld. For a permanent hold, the back of the rivet deforms to resist vibration and prevent overtightening and stripping.
To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material. For more information on installing rivets, see About Installing Blind Rivets.
Blind rivets that meet ISO 15981 (formerly DIN 7337) comply with international dimensional standards for blind rivets.
For technical drawings and 3-D models, click on a part number.
| For Material Thick., mm | Lg., mm | For Hole Size, mm | For Drill Bit Size | Head Dia., mm | Head Ht., mm | Shear Strength, lbs. | Tensile Strength, lbs.  | Specifications Met | Pkg. Qty. | Pkg. | |
3.2mm Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.5-3.5 | 6.1 | 3.2-3.3 | 3.2 mm | 6.5 | 0.8 | 110 | 150 | DIN 7337, ISO 15981 | 50 | 000000000 | 000000 |
| 3.5-5.5 | 8 | 3.2-3.3 | 3.2 mm | 6.5 | 0.8 | 110 | 150 | DIN 7337, ISO 15981 | 10 | 000000000 | 00000 |
| 5.5-7 | 10 | 3.2-3.3 | 3.2 mm | 6.5 | 0.8 | 110 | 150 | DIN 7337, ISO 15981 | 5 | 000000000 | 0000 |
| 7-9 | 12.3 | 3.2-3.3 | 3.2 mm | 6.5 | 0.8 | 110 | 150 | DIN 7337, ISO 15981 | 25 | 000000000 | 0000 |
| 9.5-12.5 | 16 | 3.2-3.3 | 3.2 mm | 6.5 | 0.8 | 110 | 150 | DIN 7337, ISO 15981 | 5 | 000000000 | 00000 |
4mm Dia. | |||||||||||
| 1.5-3 | 6.6 | 4-4.1 | 4 mm | 8 | 1 | 190 | 220 | DIN 7337, ISO 15981 | 10 | 000000000 | 00000 |
| 5-6.5 | 10 | 4-4.1 | 4 mm | 8 | 1 | 190 | 220 | DIN 7337, ISO 15981 | 25 | 000000000 | 0000 |
| 6.5-8.5 | 12.9 | 4-4.1 | 4 mm | 8 | 1 | 190 | 220 | DIN 7337, ISO 15981 | 5 | 000000000 | 0000 |
| 8.5-12.5 | 16.1 | 4-4.1 | 4 mm | 8 | 1 | 190 | 220 | DIN 7337, ISO 15981 | 10 | 000000000 | 0000 |
4.8mm Dia. | |||||||||||
| 3.5-5.5 | 8 | 4.8-4.9 | 4.8 mm | 9.5 | 1.1 | 260 | 310 | DIN 7337, ISO 15981 | 5 | 000000000 | 0000 |
| 4.5-6 | 10.3 | 4.8-4.9 | 4.8 mm | 9.5 | 1.1 | 260 | 310 | DIN 7337, ISO 15981 | 25 | 000000000 | 00000 |
| 6-8 | 13.5 | 4.8-4.9 | 4.8 mm | 9.5 | 1.1 | 260 | 310 | DIN 7337, ISO 15981 | 1 | 000000000 | 0000 |
| 8-12 | 16.7 | 4.8-4.9 | 4.8 mm | 9.5 | 1.1 | 260 | 310 | DIN 7337, ISO 15981 | 10 | 000000000 | 0000 |