How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Nuts for High-Pressure Nipples for Compressed Gas
Slide a high-pressure hose nipple for compressed gas into one of these nuts to connect a pipe to the inlet of a pressure regulator. They are also known as CGA (Compressed Gas Association) nuts and inlet nuts.
Brass nuts have good corrosion resistance and are softer than 316 stainless steel nuts, so they're easier to thread together. 316 stainless steel nuts have excellent corrosion resistance.
Nuts with left-hand threads are identified with a notch.
Note: Nuts have a CGA, BS, or DIN number that corresponds to a specific type of gas. Choose a nut with the same number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F, except DIN 477 No. 9: 250° F
Number | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| CGA 660 | 1.035"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Refrigerant Gases | 000000000 | 00000 |
316 Stainless Steel | |||||||
| CGA 670 | 1.035"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Hydrogen Fluoride, Nitrogen Trifluoride, Tungsten Hexafluoride | 000000000 | 00000 |
| CGA 677 | 1.035"-14 | NGO | Left Hand | 6,400 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |