Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Use these kits to connect standard-size stainless steel pipe flanges for ANSI Class 150 or 300.

Made from 316 stainless steel, these Grade B8M screws are more corrosion resistant than 18-8 stainless steel screws and have excellent resistance to chemicals and salt water. Screws meet ASTM A193 regulations, so they can be used in high-pressure and high-temperature applications. Also known as pressure bolts.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Tighten these nuts by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Made of 316 stainless steel for excellent corrosion resistance—including in salt water—these nuts tighten to the left and won’t loosen from counterclockwise motion. For use in low-clearance areas, they’re half the height of standard hex nuts.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They’re Grade 2 steel, so they can be used for fastening panels and other light duty fastening applications

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They’re Grade 5 steel, so you can used these inch-sized nuts for most fastening applications.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

Also kown as heavy hex nuts, these nuts are about 10% wider and taller than standard hex nuts to distribute load over a large area.

These nuts have good chemical resistance.

Brass nuts are resistant to corrosion in wet environments and electrically conductive.

These nuts have good chemical resistance.

Use these nuts for light duty fastening applications, such as securing access panels.

Brass nuts are resistant to corrosion in wet environments and electrically conductive.

More corrosion resistant than 18-8 stainless steel locknuts, these locknuts have excellent resistance to chemicals and salt water.

Includes inch thread sizes. These Grade 8 steel locknuts are 25% stronger than our medium-strength steel nylon-insert locknuts.

These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low clearance applications or jam one against a hex nut to hold it in place.

These locknuts have good chemical resistance and may be mildly magnetic.

Known for their strength, these locknuts are zinc-plated to resist corrosion in wet environments.

Also known as castle nuts, secure these nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance.

Stainless steel locknuts have excellent corrosion resistance in most environments.

When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut's load to resist spinoff caused by vibration.

Made from 18-8 stainless steel, these flange nuts have good chemical resistance.

About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.

Made from Grade 8 steel, these nuts are about 25% stronger than medium-strength steel coupling nuts. Furnished in inch thread sizes.

These coupling nuts have good chemical resistance.

Known for their strength, steel coupling nuts are available with a corrosion-resistant finish.

These cap nuts have excellent resistance to chemicals and salt water.

These Grade 5 square nuts are suitable for fastening most machinery and equipment.

Grade B16 threaded rods maintain their strength at higher temperatures than Grade B7 threaded rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

18-8 stainless steel threaded rods have good chemical resistance.

A distorted thread grips the screw to resist loosening.

A black-phosphate finish provides mild corrosion resistance.

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Also known as nut eyebolts, these are designed for through-hole applications.

These eyebolts retain their strength in temperatures as low as -40° F.

Create your own lifting eye by adding an eye nut to a stud or bolt.

Remove the shackle after lifting while keeping the base installed for future use.