Also known as heavy hex nuts, these nuts are about 10% wider and taller than standard hex nuts and distribute the load over a large area. Grade 2H nuts are comparable in strength to Grade 9 bolts. They're about 20% stronger than high-strength steel nuts and are used in heavy machinery, such as earth-moving equipment.

PTFE-coated steel nuts have a slippery surface to resist sticking during installation. They're resistant to chemicals and salt water.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. They're able to maintain their strength in high-pressure and high-temperature environments and are used with ASTM A193 bolts to fasten pressure tanks, valves, and flanges. Also known as heavy hex nuts, they are about 10% wider and taller than standard hex nuts and distribute the load over a large area. Nuts may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.

A nylon insert grips the bolt to resist loosening without damaging threads. These nuts are reusable, but their holding power lessens with each use. Made from Grade 8 steel, they're about 25% stronger than medium-strength steel locknuts.

Steel locknuts without a finish are ready to be painted or finished.

Zinc yellow-chromate plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

For technical drawings and 3-D models, click on a part number.