About Thumb Screw and Binding Post Materials
More
About Set Screws
More
Ultra-Fine-Thread Ball-Point Set Screws
Fine threads give you precise control. Made from 303 stainless steel, these set screws have good corrosion resistance. To install screws in unthreaded holes, use an optional threaded insert (sold separately). Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Material | Drive Size | Hardness | Each | |
3/16"-100  | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
Ultra-Fine-Thread Plastic-Head Thumb Screws
Fine threads give you precise control. They have a ball bearing tip that adjusts to angled surfaces and minimizes damage from surface contact. They have a lightweight and nonconductive plastic head and chemical-resistant 18-8 stainless steel threads. The head is knurled for slip-resistant controlled adjustment. Length is measured from under the head.
Optional threaded inserts can be used to install these thumb screws into existing holes.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Tip Dia. | Dia. | Ht. | Max. Temperature, °F | Color | Tensile Strength, psi | Each | |
18-8 Stainless Steel | ||||||||
3/16"-100 | ||||||||
| 3/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 000000 |
| 1" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 1/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 1/2" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
| 1 3/4" | 1/8" | 3/8" | 7/16" | 180° | Black | 60,000 | 000000000 | 00000 |
Ultra-Fine-Threaded Inserts for Plastic
Use these inserts to install fine-threaded screws in existing holes. Made from brass, they’re corrosion resistant, electrically conductive, and nonmagnetic. Press them into a drilled hole.
For technical drawings and 3-D models, click on a part number.