About Nuts, Materials, and Finishes
More
About Tapping Screws
More
About Set Screws
More
About Socket Head Screws
More
About Rounded Head Screws
More
About Flat Head Screws
More
Alloy Steel Socket Head Screws
With a tensile strength of 170,000 psi, these alloy steel screws are stronger than Grade 8 steel screws. Length is measured from under the head.
Black-oxide steel screws are mildly corrosion resistant in dry environments.
Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Threading | Thread Spacing | Dia., mm | Ht., mm | Drive Size, mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
M1.4 × 0.3 mm | ||||||||||
Black-Oxide Class 12.9 Alloy Steel | ||||||||||
3 | Fully Threaded | Coarse | 2.5 | 1.4 | 1.3 | 170,000 | DIN 912 | 10 | 000000000 | 000000 |
4 | Fully Threaded | Coarse | 2.5 | 1.4 | 1.3 | 170,000 | DIN 912 | 10 | 000000000 | 00000 |
5 | Fully Threaded | Coarse | 2.5 | 1.4 | 1.3 | 170,000 | DIN 912 | 10 | 000000000 | 00000 |
6 | Fully Threaded | Coarse | 2.5 | 1.4 | 1.3 | 170,000 | DIN 912 | 5 | 000000000 | 00000 |
18-8 Stainless Steel Socket Head Screws
Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
Metric screws are also known as A2 stainless steel screws.
Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch.
Screws that meet ASME B1.1, ASME B18.3, ISO 21269, and ISO 4762 (formerly DIN 912) comply with standards for dimensions.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Threading | Thread Spacing | Dia., mm | Ht., mm | Drive Size, mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
M1.4 × 0.3 mm | ||||||||||
18-8 Stainless Steel | ||||||||||
2 | Fully Threaded | Coarse | 2.6 | 1.4 | 1.3 | 70,000 | DIN 912, ISO 4762 | 5 | 000000000 | 000000 |
3 | Fully Threaded | Coarse | 2.6 | 1.4 | 1.3 | 70,000 | DIN 912, ISO 4762 | 5 | 000000000 | 00000 |
4 | Fully Threaded | Coarse | 2.6 | 1.4 | 1.3 | 70,000 | DIN 912, ISO 4762 | 5 | 000000000 | 00000 |
5 | Fully Threaded | Coarse | 2.6 | 1.4 | 1.3 | 70,000 | DIN 912, ISO 4762 | 5 | 000000000 | 00000 |
6 | Fully Threaded | Coarse | 2.6 | 1.4 | 1.3 | 70,000 | DIN 912, ISO 4762 | 5 | 000000000 | 00000 |
Super-Corrosion-Resistant 316 Stainless Steel Socket Head Screws
More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic. Length is measured from under the head.
Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch. Screws that meet ISO 4762 (formerly DIN 912) comply with specifications for dimensional standards.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Threading | Thread Spacing | Dia. | Ht. | Drive Size | Finish | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||||||
M1.4 × 0.3mm | |||||||||||
2mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 25 | 000000000 | 000000 |
3mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 10 | 000000000 | 0000 |
4mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 10 | 000000000 | 0000 |
5mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 10 | 000000000 | 0000 |
6mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 10 | 000000000 | 00000 |
8mm | Fully Threaded | Coarse | 2.6mm | 1.4mm | 1.3 mm | Passivated | 70,000 | DIN 912, ISO 4762 | 25 | 000000000 | 00000 |
18-8 Stainless Steel Narrow Cheese Head Slotted Screws
More corrosion resistant than steel, and almost as strong, these 18-8 stainless steel screws have a narrower head than pan head screws to fit into tight spaces. They’re often used in electrical panels and next to flanges and raised surfaces in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. A deep slot gives you more driving power and keeps the screwdriver from slipping. Length is measured from under the head.
Passivated screws are finished with an extra layer of rust protection.
ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.
For technical drawings and 3-D models, click on a part number.
Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Finish | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Flat Tip—18-8 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M1.4 × 0.3 mm | |||||||||
2 | Fully Threaded | 2.60 | 0.90 | __ | 70,000 | DIN 84, ISO 1207 | 5 | 000000000 | 000000 |
3 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 0000 |
4 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 0000 |
5 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 0000 |
6 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 0000 |
8 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
10 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
12 | Fully Threaded | 2.60 | 0.90 | Passivated | 70,000 | DIN 84, ISO 1207 | 25 | 000000000 | 00000 |
Metric 18-8 Stainless Steel Slotted Flat Head Screws
These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. All are passivated for added protection against oxidation and corrosion. They’re angled under the head to sit flush within countersunk holes. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Metric Steel Slotted Flat Head Screws
Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part. Length is measured from the top of the head.
Screws with an extended tip, sometimes called a full dog point, fit into a hole or slot to keep parts such as pulleys and gears aligned. Use these screws in place of dowel pins; their threads clamp your parts down and keep them from rotating.
Screws with a black-oxide finish have mild corrosion resistance, but only in dry environments. DIN 925 and ISO 2009 (formerly DIN 963) screws meet international standards for fastener dimensions. ISO 2009 and DIN 963 are functionally equivalent with slight differences in head height, diameter, and thread length.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Dia., mm | Lg., mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Extended Tip—Black-Oxide Steel | ||||||||||
M1.4 × 0.3 mm | ||||||||||
2.5 | Fully Threaded | 2.60 | 0.84 | 0.8 | 1 | 60,000 | DIN 925 | 1 | 000000000 | 000000 |
Metric Thread-Forming Screws for Soft Metal
These screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper. They’re also known as Taptite® screws. Made from steel, they're zinc-plated steel to resist corrosion in wet environments. Length is measured from under the head.
Screws with a Torx-Plus drive allow you to apply extra force with less slippage or damage to the recess.
For technical drawings and 3-D models, click on a part number.
Head, mm | ||||||||
---|---|---|---|---|---|---|---|---|
Lg., mm | Dia. | Ht. | Drive Size | Thread Pitch, mm | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
M1.4 | ||||||||
3 | 2.9 | 1.12 | IP5, T5 | 0.3 | Aluminum, Brass, Copper | 25 | 000000000 | 000000 |
4 | 2.9 | 1.12 | IP5, T5 | 0.3 | Aluminum, Brass, Copper | 25 | 000000000 | 00000 |
5 | 2.9 | 1.12 | IP5, T5 | 0.3 | Aluminum, Brass, Copper | 25 | 000000000 | 00000 |
6 | 2.9 | 1.12 | IP5, T5 | 0.3 | Aluminum, Brass, Copper | 25 | 000000000 | 00000 |
Metric 18-8 Stainless Steel Flat-Tip Set Screws
18-8 stainless steel set screws are chemical resistant and may be mildly magnetic. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Lg., mm | Drive Size, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||
---|---|---|---|---|---|---|
M1.4 × 0.3 mm | ||||||
5 | 0.7 | Not Rated | DIN 913, ISO 4026 | 5 | 000000000 | 000000 |
Metric Low-Strength Steel Hex Nuts
About half the strength of medium-strength steel nuts, these nuts are for light duty fastening applications, such as securing access panels.
Zinc-plated and zinc yellow-chromate plated steel nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||
M1.4 | 0.3 | 3 | 1.2 | DIN 934 | 10 | 000000000 | 00000 |
Metric 18-8 Stainless Steel Hex Nuts
These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.
Black-oxide stainless steel nuts have a dark surface color.
For technical drawings and 3-D models, click on a part number.
Metric Super-Corrosion-Resistant 316 Stainless Steel Hex Nuts
These nuts have excellent chemical resistance and can be used in saltwater environments. They may be mildly magnetic. They're also known as A4 stainless steel.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||
M1.4 | 0.3 | 3 | 1.2 | DIN 934 | 5 | 000000000 | 000000 |
Metric Brass Hex Nuts
Made from brass, these nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||
M1.4 | 0.3 | 3 | 1.2 | DIN 934 | 5 | 000000000 | 000000 |
Heat-Set Inserts for Plastic
Install these inserts into plastic parts to create a secure base for fasteners. Also known as Chevron and headed inserts, they are often used to strengthen mounting holes on brittle plastics, such as on 3D printed parts. Unlike plastic threads, which wear down with repeated use, these threads hold their shape over a long life. Press inserts into straight holes that have been drilled, printed, or molded into plastic parts, then heat them with a soldering tip to melt the surrounding plastic. As the plastic cools, it fuses to the sharp, diagonal ridges around the inserts, which withstand torque and prevent the inserts from being pulled out. The interior is fully threaded, so you can access the threads from both sides of a through-hole.
Made with lead, brass inserts are stronger than aluminum and other brass alloys but not as strong as stainless steel inserts. They have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Miniature Press-Fit Threaded Standoffs with Open End
Designed to fit in the limited space of compact electronics, such as laptops and hand-held devices, these standoffs have a recess under the head that clinches a panel while splines on the head bite in for an extra-strong hold. The open end creates a through hole. Standoffs have excellent wear resistance and may be mildly magnetic. Use a lever press to install.
For technical drawings and 3-D models, click on a part number.