Choose a Category
Clear All
System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size | Show |
|---|
|
Thread Size Thread Size | Hide |
|---|
Thread Type Thread Type |
|---|
|
Drive Style Drive Style |
|---|
 | Phillips |
Rounded Head Style Rounded Head Style |
|---|
 | Pan |
Material Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
Finish Finish |
|---|
|
Hardness Hardness |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Thread Spacing Thread Spacing |
|---|
|
Thread Direction Thread Direction |
|---|
 | Right Hand |
Drive Size Drive Size |
|---|
|
Threading Threading |
|---|
 | Fully Threaded |
Flat Head Profile Flat Head Profile |
|---|
 | Standard |
Rounded Head Profile Rounded Head Profile |
|---|
|
About Rounded Head Screws
More
About Flat Head Screws
More
JIS Steel Pan Head Phillips Screws
Made to Japanese Industrial Standards, these screws have narrower and shorter heads than standard Phillips pan head screws. They have a zinc plating to resist corrosion in wet environments. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Drive Size | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
M1.7 × 0.35 mm | |||||||||
| 2 | Fully Threaded | 2.50 | 0.50 | No. 0 | Not Rated | JCIS10-70 | 25 | 000000000 | 00000 |
| 3 | Fully Threaded | 2.50 | 0.50 | No. 0 | Not Rated | JCIS10-70 | 25 | 000000000 | 0000 |
| 4 | Fully Threaded | 2.50 | 0.50 | No. 0 | Not Rated | JCIS10-70 | 25 | 000000000 | 0000 |
| 5 | Fully Threaded | 2.50 | 0.50 | No. 0 | Not Rated | JCIS10-70 | 25 | 000000000 | 0000 |
| 6 | Fully Threaded | 2.50 | 0.50 | No. 0 | Not Rated | JCIS10-70 | 25 | 000000000 | 0000 |
JIS Steel Phillips Flat Head Screws
These screws are made to Japanese Industrial Standards. A zinc plating provides mild corrosion resistance. Screws are angled under the head to sit flush within countersunk holes. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Drive Size | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
M1.7 × 0.35 mm | |||||||||
| 2 | Fully Threaded | 2.5 | 0.5 | No. 0 | 60,000 | JCIS10-70 | 25 | 000000000 | 00000 |
| 3 | Fully Threaded | 2.5 | 0.5 | No. 0 | 60,000 | JCIS10-70 | 25 | 000000000 | 0000 |
| 4 | Fully Threaded | 2.5 | 0.5 | No. 0 | 60,000 | JCIS10-70 | 25 | 000000000 | 0000 |
| 5 | Fully Threaded | 2.5 | 0.5 | No. 0 | 60,000 | JCIS10-70 | 25 | 000000000 | 0000 |
| 6 | Fully Threaded | 2.5 | 0.5 | No. 0 | 60,000 | JCIS10-70 | 25 | 000000000 | 0000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)