Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Seal out contaminants and prevent leaks—a rubber O-ring under the head prevents leaks and seals out contaminants.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

These metric 316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

Made from nylon, these metric pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Made from 18-8 stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. The extra-wide truss head distributes holding pressure to reduce the likelihood of crushing thin material.

The Torx or Torx-Plus drive on these metric screws have more points of contact than other drives, allowing you to tighten them without damaging the recess.

These metric screws have a Torx drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

Made from nylon, these screws are chemical and oil resistant, nonconductive, and lightweight.

Install these metric pan head screws for a low-profile, finished look—no countersink required.

These metric screws have a nylon patch bonded to the threads that adds friction to prevent loosening from vibration. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water.

These screws meet Japanese Industrial Standards.

These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.

These metric set screws have good chemical resistance.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

These metric 18-8 stainless steel set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Good for humid, damp, and washdown areas, these metric 18-8 stainless steel set screws are more corrosion resistant than alloy steel set screws and nearly as strong. Their flat tip holds tightly on flat surfaces without damaging them, even when making frequent adjustments.

Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

These screws have metric thread sizes. They are 18-8 stainless steel for good chemical resistance.

About half the strength of medium-strength steel nuts, these metric nuts are for light duty fastening applications.

These metric nuts have good chemical resistance and may be mildly magnetic.

Polycarbonate nuts stand up to oil, grease, and detergents.

Stronger than PTFE nuts and resistant to solvents, bases, and acids—including hydrochloric and nitric acid—these PVDF nuts are often used in chemical processing equipment.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

These nuts should be used for light duty fastening applications, such as securing access panels.

50% taller than standard hex nuts, these metric nuts provide a larger gripping area for installation with a wrench.

Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes.

These metric coupling nuts have good chemical resistance.

One-third the weight of steel, aluminum coupling nuts resist corrosion in wet environments.

Known for their strength, steel coupling nuts are available with a corrosion-resistant finish.

Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.

Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.

These tools include everything you need to install press-fit nuts by hand.

Made from 18-8 stainless steel, these metric thumb nuts have good chemical resistance and may be mildly magnetic.

Available in metric sizes, these 18-8 stainless steel threaded rods have good chemical resistance.

These metric brass threaded rods are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

Install these inserts into plastic parts to create a secure base for fasteners.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

With a distorted internal thread and keys on the outside, these inserts create a strong hold on both fasteners and surrounding material.