System of Measurement System of Measurement |
|---|
|
Thread Size Thread Size | Show |
|---|
|
Thread Size Thread Size | Hide |
|---|
Thread Type Thread Type |
|---|
|
Material Material |
|---|
|
Thread Spacing Thread Spacing |
|---|
|
Fastener Strength Grade/Class Fastener StrengthGrade/Class |
|---|
|
|
Specifications Met Specifications Met |
|---|
|
Thread Direction Thread Direction |
|---|
 | Right Hand |
Thread Fit Thread Fit |
|---|
|
Drive Style Drive Style |
|---|
 |  |
| Hex | External Hex |
Drive Size Drive Size |
|---|
|
Threading Threading |
|---|
 | Fully Threaded |
 | Partially Threaded |
Finish Finish |
|---|
|
Head Type Head Type |
|---|
 | Socket |
Tensile Strength Tensile Strength |
|---|
|
|
About Threaded Studs and Rods
More
About Nuts, Materials, and Finishes
More
About Selecting Shock Absorbers
To select the best shock absorber for your application, you need to find the energy capacity your application requires. Use this formula to calculate the energy capacity required to stop a horizontal-moving load. For example, if you have a 250-lb. load moving at 25 inches per second, your calculation is (250 lbs. ÷ 772) × 252 = 202.4 in.-lbs. energy capacity.
Note: Choose a shock absorber with a higher energy capacity than you calculated. Factors such as driving force or an inclined surface will increase the energy capacity required.
Energy Capacity (in.-lbs.) = (Weight, lbs./772) × Velocity2 (in. per second)
About Socket Head Screws
More
Alloy Steel Socket Head Screws
With a tensile strength of 170,000 psi, these alloy steel screws are stronger than Grade 8 steel screws. Length is measured from under the head.
Black-oxide steel screws are mildly corrosion resistant in dry environments.
Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch. Screws that meet ASME B18.3, ASME B18.3M, ISO 21269, and ISO 4762 (formerly DIN 912) comply with specifications for dimensional standards.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Threading | Min. Thread Lg., mm | Thread Spacing | Dia., mm | Ht., mm | Drive Size, mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
M33 × 3.5 mm | |||||||||||
Black-Oxide Class 12.9 Alloy Steel | |||||||||||
| 80 | Fully Threaded | __ | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 000000 |
| 90 | Fully Threaded | __ | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 00000 |
| 100 | Fully Threaded | __ | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 00000 |
| 120 | Partially Threaded | 78 | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 00000 |
| 180 | Partially Threaded | 78 | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 00000 |
| 200 | Partially Threaded | 78 | Coarse | 50 | 33 | 24 | 170,000 | DIN 912, ISO 4762 | 1 | 000000000 | 00000 |
Metric Medium-Strength Steel Hex Nuts—Class 8
Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.
Black-oxide steel nuts have a dark surface color and are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Metric Fine-Thread Medium-Strength
Steel Hex Nuts—Class 8
Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.
Zinc-plated steel nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Metric Extreme-Strength Steel Hex Nuts—Class 12
Class 12 nuts are comparable in strength to Class 12.9 bolts. They're about 20% stronger than high-strength steel nuts and often used in heavy machinery, such as earth-moving equipment.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel—Class 12 | |||||||
| M33 | 3.5 | 50 | 26 | DIN 934 | 1 | 000000000 | 000000 |
Metric 18-8 Stainless Steel Hex Nuts
These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.
Black-oxide stainless steel nuts have a dark surface color.
For technical drawings and 3-D models, click on a part number.
Metric Fine-Thread 18-8 Stainless Steel Hex Nuts
Made from 18-8 stainless steel, these nuts have good chemical resistance and may be mildly magnetic. They're also known as A2 stainless steel.
Black-oxide stainless steel nuts have a dark surface color.
For technical drawings and 3-D models, click on a part number.
Metric Super-Corrosion-Resistant
316 Stainless Steel Hex Nuts
These nuts have excellent chemical resistance and can be used in saltwater environments. They may be mildly magnetic. They're also known as A4 stainless steel.
Black-oxide stainless steel nuts have a dark surface color.
For technical drawings and 3-D models, click on a part number.
Metric 18-8 Stainless Steel Thin Hex Nuts
Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. Commonly used as locknuts, threading a thin nut against any other hex nut prevents loosening caused by vibration. You can also use them as jam nuts by threading two of these thin nuts against each other on a threaded rod to create a gripping point for turning the rod without damaging its threads. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.
DIN 936 nuts are sometimes taller and wider than ISO 4035 nuts. Although it’s no longer active, DIN 936 is still a commonly referenced standard for material and dimensional compatibility.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||
| M33 | 3.5 | 50 | 14 | DIN 936 | 1 | 000000000 | 000000 |
Metric Medium-Strength Steel Thin Hex Nuts
Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels. Also known as jam nuts, they can be threaded together to form a locknut that won’t move or loosen due to vibration. When fastening threaded rod, you can use two nuts to create a point for tightening the rod with a wrench. These nuts have less tensile strength than a standard hex nut when used alone.
Steel nuts are best for dry environments, since exposure to moisture and chemicals will cause them to rust.
Nuts that meet DIN 936 and ISO 4035 (formerly DIN 439B) adhere to international standards for dimensions and material composition to ensure compatibility with other products and tools. Although the DIN 936 and DIN 439B standards are no longer active, they are commonly referenced globally.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Steel—Class 17H | |||||||
| M33 | 3.5 | 50 | 14 | DIN 936 | 1 | 000000000 | 00000 |
Metric Fine-Thread Medium-Strength Steel Thin Hex Nuts
These nuts are half the height of standard hex nuts, and have closely spaced threads to prevent loosening from vibration. They are not compatible with coarse threads. Half as strong as medium-strength steel nuts, they are often used for light-duty applications, such as fastening signs in place.
Also known as jam nuts, they can be used in place of standard nuts when height clearances are tight, or threaded together to form a locknut. When fastening threaded rod, you can use two nuts to create a point for tightening the rod into place with a wrench. These nuts have less tensile strength than a standard hex nut when used alone.
Steel nuts are best for dry environments, since exposure to moisture and chemicals will cause them to rust.
Nuts that meet DIN 936 and ISO 4035 (formerly DIN 439B) adhere to international standards for dimensions and material composition to ensure compatibility with other products and tools. Although the DIN 936 and DIN 439B standards are no longer active, they are commonly referenced globally.
For technical drawings and 3-D models, click on a part number.
Metric Medium-Strength Steel
Nylon-Insert Locknuts—Class 8
Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes. The nylon insert also won’t damage the threads on your bolt. All are reusable, but their holding power lessens with each use. Pair them with compatible Class 8.8 metric bolts.
These locknuts meet the dimensional and material standards of DIN and ISO that make sure they're compatible with other parts and tools. Although DIN 982 and 985 are no longer active standards, they’re still a common reference point for designers. With only slight differences in tolerance, the ISO 7041-2 standard has replaced the inactive DIN 982 standard. The ISO 7040 standard is similar to the inactive DIN 985 standard, except the overall height is a little taller.
Zinc-plated steel locknuts are a good option in dry environments. The zinc plating prevents the steel from corroding until the plating wears away.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Insert Max. Temp., °F | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 8 | ||||||||
| M33 | 3.5 | 50 | 33 | 220° | DIN 985, ISO 7040 | 1 | 000000000 | 000000 |
Metric Fine-Thread Medium-Strength
Steel Nylon-Insert Locknuts—Class 8
Get a grip on metric bolts exposed to vibration, wear, and changes in temperature. These metric locknuts have a nylon insert that holds onto bolts without damaging their threads. They have fine-pitch threads, which are closer together than coarse-pitch threads and less likely to loosen from vibration. Fine threads and coarse threads are not compatible. These locknuts are reusable but lose holding power with each use.
Made of Class 8 steel, these nuts are strong enough for use with most machinery and equipment. A zinc plating prevents rust in wet and damp areas. Combine them with Class 8.8 metric bolts, which are comparable in strength.
These locknuts meet the dimensional and material standards of DIN and ISO that make sure they're compatible with other parts and tools. Although DIN 982 and 985 are no longer active standards, they’re still a common reference point for designers. With only slight differences in tolerance, ISO 7041-2 and 7040 have replaced the inactive DIN standards.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Insert Max. Temp., °F | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 8 | ||||||||
| M33 | 2 | 50 | 33 | 220° | DIN 985, ISO 7040 | 1 | 000000000 | 000000 |
Metric High-Strength Steel
Nylon-Insert Locknuts—Class 10
A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel. They're used in valves, pumps, suspension systems, and other high-stress parts. A zinc plating prevents rust in wet areas. Combine with Class 10.9 metric bolts, which have similar strength. All are reusable but lose holding power after each use.
These locknuts meet ISO 7040 and ISO 7041-2 (formerly DIN 985 and DIN 982), which are international standards for dimensions. The ISO standards are functionally equivalent to the DIN standards with slight differences in width, height, or tolerances.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Wd., mm | Ht., mm | Insert Max. Temp., °F | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 10 | ||||||||
| M33 | 3.5 | 50 | 33 | 220° | DIN 985, ISO 7040 | 1 | 000000000 | 000000 |
Metric 18-8 Stainless Steel Coupling Nuts
Made from 18-8 stainless steel, these metric coupling nuts have good chemical resistance and may be mildly magnetic. Also known as extension nuts, use them to connect and extend threaded rods.
For technical drawings and 3-D models, click on a part number.
Thread | Each | ||||||
|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg., mm | Wd., mm | Specifications Met | 1-9 | 10-Up | |
18-8 Stainless Steel | |||||||
| M33 | 3.5 | 99 | 50 | DIN 6334 | 000000000 | 000000 | 000000 |
Metric Medium-Strength Steel Threaded Rods—Grade B7
These Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
For technical drawings and 3-D models, click on a part number.
Medium-Strength Steel Threaded Rods—Class 8.8
An economical alternative to Grade B7 and Grade B16 threaded rods, these metric Class 8.8 rods are suitable for fastening most machinery and equipment.
Zinc-plated steel threaded rods resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Metric High-Strength Steel Threaded Rods—Class 10.9
These Class 10.9 steel threaded rods are about 25% stronger than medium-strength steel rods.
For technical drawings and 3-D models, click on a part number.
| Lg. | Thread Pitch, mm | Tensile Strength, psi | Hardness | Specifications Met | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
M33 | ||||||
| 1 m | 3.5 | 150,000 | Rockwell C32 | DIN 975 | 0000000 | 0000000 |
Metric Low-Strength Steel Threaded Rods
These threaded rods are about half the strength of medium-strength steel threaded rods for light duty hanging, mounting, and fastening.
Zinc-plated steel threaded rods are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Metric 18-8 Stainless Steel Threaded Rods
These 18-8 stainless steel threaded rods have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Mounting Nuts for Shock Absorbers
Use Mounting Blocks for Shock Absorbers (not included) to mount and secure threaded-body shock absorbers.
Steel | |||
|---|---|---|---|
| Thread Size | Thread Pitch, mm | Each | |
Hex Nut | |||
| M33 | 1.5 | 0000000 | 000000 |