For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.

Meets ASME and NRC requirements for use in nuclear power plants. Use to seal end caps on stainless steel pipes, hold labels and signs, and seal ductwork.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

Tape is cut into convenient discs and rectangles.

Mount lightweight signs and trim with this economical tape.

Use this tape outdoors for sealing and mounting signs and security control panels.

Remove mounted objects from most surfaces without leaving residue behind.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

One side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the other side is coated with acrylic adhesive for a strong bond to metal and plastic.

Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape can withstand temperatures up to 300° F.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

Use these clear sheets for strong, invisible bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

This tape forms a stronger bond than our other packaging tape.

Made of chemical-resistant PVC, this tape securely seals packages in harsh environments.

The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.

Seal and label packages in one step.

For refrigerated packing and shipping, this tape sticks even when applied in cold and damp environments.

Twice as strong as our standard reinforced strapping tape for extra-heavy loads. Fiberglass fibers run along the length.

For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.

Thicker than our standard Strapping Tape, this tape can better hold and secure large, heavy items that may shift during transport.

Tri-directional fiberglass strands provide extra strength.

Wrap outdoor HVAC line sets with this tape. It holds up to UV rays and humid weather.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.

Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.

Use this glossy tape to seal seams and repair vinyl material such as banners.

This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.

Create dams in pipes before welding, then wash away with water or steam.

Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.

Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

Twice as thick as our standard antistatic electrical tape, this tape is made of abrasion-resistant aramid and antistatic PTFE.

Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.

This crepe paper tape keeps its hold, even on 300° F surfaces.

Brush on this liquid to mask small surfaces and irregular shapes.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Cover holes, fastener heads, and small areas with these discs.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Use this polyimide tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Easy to apply and remove, this film tape protects touch screens and other delicate parts during manufacturing and shipping.

Outline and draw attention to safety zones and hazards with this tape.

Mark aisles and stairs with a high-contrast reflective strip.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.

Protect parts from radiation, x-rays, moisture, dust, and chemicals during electroplating and similar processes.

Seal out light to mask LEDs and prevent backlight bleed on LCD monitors with this opaque polyester tape.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

This tape provides a slick surface along with excellent resistance to electrical current.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Protect small parts with these slippery UHMW rings, discs, and squares.

Dissipate static and create a slick surface.

Use this PTFE-coated tape as a liner in chutes and to protect molds.

This tape discharges minor amounts of surface static electricity and resists static buildup.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

Built to handle day-to-day use.

The metal construction stands up to heavy use.

This plastic dispenser has a brake that allows you to control tension for tighter box closure.

The handle shape is designed for comfort.

Dispensers will hold three 1" wide tape rolls or any combination up to 3" wide.

Larger and heavier than standard tape dispensers, these dispensers are sturdy enough to use with reinforced tape as well as masking and office tape.

Set these dispensers to advance a set length of tape automatically so a new piece is always ready, or dispense each piece at the touch of a button.

Larger and heavier than our other select-a-length dispensers, these stand up to frequent use. Set a precise length of tape with the sliding gauge, then pull the lever to dispense.

Use the included C-clamp to attach these dispensers to any surface up to 2-1/4" thick.