Tape is cut into convenient discs and rectangles.

Mount lightweight signs and trim with this economical tape.

Use this tape outdoors for sealing and mounting signs and security control panels.

Remove mounted objects from most surfaces without leaving residue behind.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.

Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.

With a higher level of clarity than standard tape, this tape is good for joining layers of material that need light to pass through, such as clear plastic and glass.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape can withstand temperatures up to 300° F.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

Use these clear sheets for strong, invisible bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.

Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

This tape forms a stronger bond than our other packaging tape.

Seal and label packages in one step.

For use in clean rooms, this tape won't leave residue behind.

The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.

For refrigerated packing and shipping, this tape sticks even when applied in cold and damp environments.

Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.

For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.

Band and bundle heavy, shifting loads with this tape that stretches without breaking.

Tri-directional fiberglass strands provide extra strength.

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.

Carbon fibers woven together form a graphite cloth tape for reinforcing joints and repairing cracks on graphite.

Create dams in pipes before welding, then wash away with water or steam.

With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.

Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.

For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.

Temporarily join rolls of paper and film—this tape won't leave residue behind.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).

This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

Twice as thick as our standard antistatic electrical tape, this tape is made of abrasion-resistant aramid and antistatic PTFE.

Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.

This crepe paper tape keeps its hold, even on 300° F surfaces.

The adhesive on this crepe paper tape won't damage painted and finished surfaces.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Cover holes, fastener heads, and small areas with these shapes.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Cover small spots and holes while paint stripping and electroplating, or use as a moisture and dust barrier. These aluminum foil discs are flexible and conform to irregular shapes.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces.

Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.

Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.

Protect parts from radiation, X-rays, moisture, dust, and chemicals during electroplating and similar processes.

Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

This tape provides a slick surface along with excellent resistance to electrical current.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Protect small parts with these slippery UHMW rings, discs, and squares.

Dissipate static and create a slick surface.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

This tape discharges minor amounts of surface static electricity and resists static buildup.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

Built to handle day-to-day use.

For occasional taping jobs, choose these plastic dispensers.

The metal construction stands up to heavy use.

The handle shape is designed for comfort.