Foam Mounting Tape Sheets
Cut sheets to the shape you need for a custom fit. The open-cell foam allows gas, water, and air to pass through.
Manufacturer Model Number | Wd. | Lg. | Overall Thick. | Material | Adhesive Location | Adhesive Type | Temperature Range, °F | Cell Type | Tensile Strength, psi | Color | Each | |
3M 4004 | 12" | 12" | 0.25" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 90 | White | 000000 | 000000 |
3M 4008 | 12" | 12" | 0.125" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 160 | White | 0000000 | 00000 |
3M 4026 | 12" | 12" | 0.0625" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 180 | White | 0000000 | 00000 |
3M 4032 | 12" | 12" | 0.0313" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 240 | White | 0000000 | 00000 |
3M 4052 | 12" | 12" | 0.0313" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 225 | Black | 0000000 | 00000 |
3M 4056 | 12" | 12" | 0.0625" | Polyurethane Foam | Both Sides | Acrylic | 70° to 220° | Open | 140 | Black | 0000000 | 00000 |
Ultra Optically Clear Mounting Tape
With a higher level of clarity than standard tape, this tape is good for joining layers of material that need light to pass through, such as clear plastic and glass. It’s often used to bond layers in digital displays. Tape is produced in a clean room environment, so it’s free of contaminants that could disrupt clarity.
Width | Length, ft. | Overall Thickness | Material | Adhesive Location | Temperature Range, °F | Tensile Strength, lbs./in. wd. | Adhesion to Steel, oz./in. wd. | Each | |
Acrylic Adhesive | |||||||||
---|---|---|---|---|---|---|---|---|---|
12" | 150 | 0.0043" | Polyester Plastic | Both Sides | -40° to 250° | 30 | 65 | 000000000 | 0000000 |
Very-High-Bond (VHB) Foam Mounting Tape
Create strong, permanent bonds that can replace mechanical fasteners. This tape has adhesive on both sides, and is made from closed-cell foam to restrict absorption.
Short Roll | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Overall Thick. | Adhesive Location | Adhesive Type | Temp. Range, °F | Cell Type | Tensile Strength, psi | Adhesion to Steel, oz./in. wd. | Specifications Met | Color | Lg., ft. | Each | |
3M VHB | ||||||||||||
4941 | ||||||||||||
12" | 0.045" | Both Sides | Acrylic | -30° to 165° | Closed | 85 | 350 | UL 746C | Gray | 3 | 0000000 | 0000000 |
4945 | ||||||||||||
12" | 0.045" | Both Sides | Acrylic | -30° to 200° | Closed | 140 | 400 | UL 746C | White | 3 | 00000000 | 000000 |
4950 | ||||||||||||
12" | 0.045" | Both Sides | Acrylic | -30° to 165° | Closed | 140 | 400 | UL 746C | White | 3 | 00000000 | 000000 |
Optically Clear Very-High-Bond (VHB) Foam Mounting Tape
Use this clear tape for strong, invisible bonds that can replace mechanical fasteners. It has adhesive on both sides, and is made from closed-cell foam to restrict absorption.
Short Roll | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Overall Thick. | Adhesive Location | Adhesive Type | Temperature Range, °F | Cell Type | Tensile Strength, psi | Adhesion to Steel, oz./in. wd. | Specifications Met | Lg., ft. | Each | |
3M VHB 4905 | |||||||||||
12" | 0.02" | Both Sides | Acrylic | -30° to 200° | Closed | 100 | 190 | UL 746C | 3 | 00000000 | 000000 |
3M VHB 4910 | |||||||||||
12" | 0.04" | Both Sides | Acrylic | -30° to 200° | Closed | 100 | 240 | UL 746C | 3 | 00000000 | 000000 |
Very-High-Bond (VHB) Foam Mounting Tape for Hard-to-Bond Materials
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as powder-coated surfaces, polypropylene, polystyrene, ABS, nylon, and rigid vinyl. Use it to create strong, permanent bonds that can replace mechanical fasteners. It has adhesive on both sides, and is made from closed-cell foam to restrict absorption.
Very-High-Bond (VHB) Foam Mounting Tape Sheets for Hard-to-Bond Materials
The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces. Cut them to the shape you need for a custom fit. They have adhesive on both sides, and are made from closed-cell foam to restrict absorption.
4952 bonds powder-coated surfaces, polypropylene, polystyrene, ABS, nylon, and rigid vinyl.
5906 and 5907 are thin and impact resistant, and they adhere to hard-to-bond plastics such as polypropylene and polyethylene.
Manufacturer Model Number | Wd. | Lg. | Overall Thick. | Adhesive Location | Adhesive Type | Min. Temperature, °F | Max. Temperature, °F | Cell Type | Tensile Strength, psi | Adhesion to Steel, oz./in. wd. | Color | Each | |
3M VHB 4952 | 12" | 12" | 0.045" | Both Sides | Acrylic | -40° | 160° | Closed | 80 | 400 | White | 0000000 | 000000 |
3M VHB 5906 | 12" | 12" | 0.006" | Both Sides | Acrylic | Not Rated | 180° | Closed | Not Rated | 160 | Black | 0000000 | 00000 |
3M VHB 5907 | 12" | 12" | 0.008" | Both Sides | Acrylic | Not Rated | 180° | Closed | Not Rated | 160 | Black | 0000000 | 00000 |
Very-High-Bond (VHB) Foam Mounting Tape Sheets
Cut sheets to the shape you need for a custom fit. They have adhesive on both sides, and are made from closed-cell foam to restrict absorption.
Manufacturer Model Number | Wd. | Lg. | Overall Thick. | Material | Adhesive Location | Adhesive Type | Temperature Range, °F | Cell Type | Tensile Strength, psi | Adhesion to Steel, oz./in. wd. | Color | Specifications Met | Each | |
3M VHB 4945 | 12" | 12" | 0.045" | Acrylic Foam | Both Sides | Acrylic | -30° to 200° | Closed | 140 | 400 | White | UL 746C | 0000000 | 000000 |
3M VHB 5952 | 12" | 12" | 0.045" | Acrylic Foam | Both Sides | Acrylic | -30° to 250° | Closed | 90 | 350 | Black | UL 746C | 0000000 | 00000 |
Optically Clear Very-High-Bond (VHB) Foam Mounting Tape Sheets
Use these clear sheets for strong, invisible bonds. Cut them to the shape you need for a custom fit. They have adhesive on both sides, and are made from closed-cell foam to restrict absorption.
Manufacturer Model Number | Wd. | Lg. | Overall Thick. | Material | Adhesive Location | Adhesive Type | Temperature Range, °F | Cell Type | Tensile Strength, psi | Adhesion to Steel, oz./in. wd. | Specifications Met | Each | |
3M VHB 4905 | 12" | 12" | 0.02" | Acrylic Foam | Both Sides | Acrylic | -30° to 200° | Closed | 100 | 190 | UL 746C | 000000 | 000000 |
3M VHB 4910 | 12" | 12" | 0.04" | Acrylic Foam | Both Sides | Acrylic | -30° to 200° | Closed | 100 | 240 | UL 746C | 0000000 | 00000 |
Outdoor Clean-Release Duct Tape
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
Wd. | Lg., ft. | Overall Thick. | Material | Facing Material | Adhesive Type | Temperature Range, °F | Max. Time for Removal | Tensile Strength, lbs./in. wd. | Adhesion to Steel, oz./in. wd. | Color | Each | |
12" | 180 | 0.012" | Cloth | Polyethylene Plastic | Rubber | 40° to 200° | 6 Months | 35 | 45 | Blue | 00000000 | 0000000 |
Aluminum Flashing Tape
Use this tape outdoors when a water tight bond is required.
Tape with asphalt-based adhesive bonds with almost any building material, including metal, wood, plastic, concrete, brick, asphalt, and glass. Use it for sealing and repair jobs, such as patching gutters. It can be painted.
Wd. | Lg., ft. | Overall Thick. | Temperature Range, °F | Tensile Strength, lbs./in. wd. | Adhesion to Steel, oz./in. wd. | Color | Each | |
Asphalt-Based Adhesive | ||||||||
---|---|---|---|---|---|---|---|---|
12" | 33 | 0.05" | -40° to 200° | Not Rated | Not Rated | Silver | 00000000 | 0000000 |
Masking Tape for Powder Coating
Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating. It removes without leaving residue.
54 ft. | 216 ft. | |||||||
---|---|---|---|---|---|---|---|---|
Wd. | Overall Thick. | Material | Adhesive Type | Temperature Range, °F | Each | Each | ||
Blue | ||||||||
12" | 0.0024" | Polyester Plastic | Silicone | -40° to 400° | 00000000 | 0000000 | 00000000 | 0000000 |
Clear | ||||||||
12" | 0.003" | Polyester Plastic | Silicone | -40° to 400° | 00000000 | 000000 | 00000000 | 000000 |
Green | ||||||||
12" | 0.0035" | Polyester Plastic | Silicone | -40° to 400° | 00000000 | 000000 | 00000000 | 000000 |
Heavy Duty Surface-Protection Tape
Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.
3M 7070UV and 3M 7071UV tape is UV resistant and can be used outdoors.
Outdoor Low-Tack Surface-Protection Tape
Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces from scratching and marring. It removes cleanly.
Surface-Protection Tape for Electronic Displays
Easy to apply and remove, this film tape protects touch screens and other delicate parts during manufacturing and shipping.
Tape with silicone adhesive handles temperatures as high as 390° F, so it’s good for manufacturing products that are cured at high temperatures after applying the tape.
Low-Tack Surface-Protection Tape
Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring. This tape removes cleanly.
Heat-Shielding Tape
This tape reflects intense heat to protect sensitive components.
Metalized polyimide plastic tape withstands temperatures up to 850° F. Use it to create a thermal barrier to stop radiant heat.
Ultra-Low-Friction Tape Made with Teflon® PTFE
Our most slippery tape, the skived PTFE allows items to glide smoothly over it.
Acrylic adhesive offers a stronger bond than silicone adhesive.
Silicone adhesive withstands temperatures up to 500°F.
Low-Friction UHMW Tape
Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact. Used between parts, it eliminates squeaks and rattles.
3 ft. | 15 ft. | 54 ft. | |||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Adhesive Type | Temperature Range, °F | Color | Each | Each | Each | |||
0.0045" Thick. | |||||||||
12" | Acrylic | -40° to 200° | White | 000000 | 00 | 000000 | 00 | 000000000 | 0000000 |
12" | Acrylic | 0° to 180° | White | 000000000 | 000000 | 000000000 | 000000 | 000000 | 00 |
0.0065" Thick. | |||||||||
12" | Acrylic | -40° to 200° | White | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
12" | Acrylic | 0° to 180° | White | 000000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
0.0115" Thick. | |||||||||
12" | Acrylic | -40° to 200° | White | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
12" | Acrylic | 0° to 180° | White | 000000000 | 00000 | 000000000 | 000000 | 000000 | 00 |
0.022" Thick. | |||||||||
12" | Acrylic | 0° to 180° | White | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.032" Thick. | |||||||||
12" | Acrylic | 0° to 180° | White | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
0.065" Thick. | |||||||||
12" | Acrylic | 0° to 180° | White | 000000000 | 000000 | 000000 | 00 | 000000 | 00 |
Low-Friction Fiberglass Tape
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Tape with a plastic liner keeps its shape as it’s applied. The liner also helps prevent the tape from sticking to itself.
Acrylic adhesive offers a stronger bond than silicone adhesive.
Silicone adhesive withstands temperatures up to 500° F.
Wd. | Overall Thick. | Temperature Range, °F | Color | Facing Material | Each | |
15 ft. | ||||||
---|---|---|---|---|---|---|
Tape | ||||||
Silicone Adhesive | ||||||
12" | 0.005" | -100° to 500° | Beige | Teflon® PTFE Plastic | 00000000 | 0000000 |
12" | 0.007" | -100° to 500° | Beige | Teflon® PTFE Plastic | 00000000 | 000000 |
Tape with Plastic Liner | ||||||
Acrylic Adhesive | ||||||
12" | 0.005" | -40° to 350° | Beige | PTFE Plastic | 00000000 | 000000 |
12" | 0.011" | -40° to 350° | Beige | PTFE Plastic | 00000000 | 000000 |
Silicone Adhesive | ||||||
12" | 0.016" | -100° to 500° | Beige | PTFE Plastic | 000000000 | 000000 |
54 ft. | ||||||
Tape | ||||||
Silicone Adhesive | ||||||
12" | 0.005" | -100° to 500° | Beige | PTFE Plastic | 00000000 | 000000 |
12" | 0.007" | -100° to 500° | Beige | PTFE Plastic | 00000000 | 000000 |