Clear All
Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
Capacity per Mount Capacity per Mount |
|---|
|
Overall Height Overall Height |
|---|
Material Material |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
|
Mounting Hole Center-to-Center Mounting HoleCenter-to-Center |
|---|
Shear Capacity per Mount Shear Capacity per Mount |
|---|
|
Hardness Hardness |
|---|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
Deflection @ Capacity Deflection @ Capacity |
|---|
|
Base Width Base Width |
|---|
Base Length Base Length |
|---|
Diameter Diameter |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Deflection @ Shear Capacity Deflection @ Shear Capacity |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Vibration-Damping Mounts
More
Fail-Safe Bolt-Down Vibration-Damping Mounts with Unthreaded Hole
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails. They minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Use these mounts in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Deflection @ Capacity | Hardness | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base | ||||||||||||||
| 375 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 000000 |
| 525 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 525 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 800 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 925 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 1,000 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,000 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,250 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,250 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,425 | 1.66" | 3.25" | 0.5" | 5.38" | 3.25" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 4.12" | 00000000 | 00000 |
| 1,950 | 1.66" | 3.94" | 0.625" | 6.25" | 3.94" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
| 1,950 | 1.66" | 3.94" | 0.75" | 6.25" | 3.94" | 0.13" | Durometer 70A | 10° to 180° | No | 2 | 0.53" | 5" | 00000000 | 00000 |
Light Duty Bolt-Down Vibration-Damping Mounts with Unthreaded Hole
Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Deflection @ Cap. | Hardness | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base | ||||||||||||||
| 6.5 | 0.75" | 0.9" | 0.26" | 1.68" | 1.25" | 0.12" | Durometer 40A | -20° to 180° | No | 2 | 0.16" | 1.41" | 00000000 | 00000 |
| 11 | 0.75" | 0.9" | 0.26" | 1.68" | 1.25" | 0.12" | Durometer 50A | -20° to 180° | No | 2 | 0.16" | 1.41" | 00000000 | 0000 |
| 15 | 0.75" | 0.9" | 0.26" | 1.68" | 1.25" | 0.12" | Durometer 60A | -20° to 180° | No | 2 | 0.16" | 1.41" | 00000000 | 0000 |
| 18 | 0.75" | 0.9" | 0.26" | 1.68" | 1.25" | 0.12" | Durometer 70A | -20° to 180° | No | 2 | 0.16" | 1.41" | 00000000 | 0000 |
General Purpose Bolt-Down Vibration-Damping Mounts with Unthreaded Hole
The design of their natural rubber body provides uniform stress distribution, isolates vibration, and protects from occasional shock in compression load applications.
Install a washer (sold separately) to keep equipment supported if the rubber fails. Match the washer diameter with the mount's base length.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional Washers | ||||||||||||||||
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Base Thick. | Deflection @ Capacity | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Natural Rubber with Aluminum Base | |||||||||||||||||
| 2 | 0.78" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 35A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 000000 | 0000000 | 00000 |
| 4 | 0.78" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 40A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 00000 | 0000000 | 0000 |
| 8 | 0.81" | 1" | 0.166" | 1.69" | 1.69" | 0.032" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.141" | 1.375" | 0000000 | 00000 | 0000000 | 0000 |
Natural Rubber with Steel Base | |||||||||||||||||
| 12 | 1.12" | 1.5" | 0.257" | 2.38" | 2.38" | 0.05" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.166" | 1.938" | 0000000 | 00000 | 0000000 | 0000 |
| 30 | 1.41" | 1.5" | 0.257" | 2.38" | 2.38" | 0.05" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.166" | 1.938" | 0000000 | 00000 | 0000000 | 0000 |
| 45 | 1.56" | 2" | 0.391" | 3" | 3" | 0.062" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.196" | 2.5" | 0000000 | 00000 | 0000000 | 0000 |
| 90 | 2.38" | 2" | 0.391" | 3" | 3" | 0.062" | 0.06" | Durometer 53A | 0° to 170° | No | 4 | 0.196" | 2.5" | 0000000 | 00000 | 0000000 | 0000 |
Bolt-Down Vibration-Damping Mounts with Unthreaded Hole for Tight Spaces
Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile. The design of their natural rubber body provides uniform stress distribution, isolates vibration, and protects from occasional shock in compression load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary.
Washers (sold separately) can be installed—one on each end of the mount—to keep equipment supported if the rubber fails. Match the washer diameter with the mount's base length.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional Washers | ||||||||||||||||
| Capacity per Mount, lbs. | O'all Ht. | Dia. | Hole Dia. | Base Lg. | Base Wd. | Base Thick. | Deflection @ Capacity | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Natural Rubber with Aluminum | |||||||||||||||||
| 2 | 0.41" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 35A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 00000 | 0000000 | 00000 |
| 4 | 0.41" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 40A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 0000 | 0000000 | 0000 |
| 8 | 0.5" | 1" | 0.166" | 1.25" | 1.25" | 0.032" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.141" | 1" | 0000000 | 0000 | 0000000 | 0000 |
Natural Rubber with Steel | |||||||||||||||||
| 12 | 0.62" | 1.5" | 0.257" | 1.75" | 1.75" | 0.05" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.166" | 1.375" | 0000000 | 0000 | 0000000 | 0000 |
| 20 | 1" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
| 30 | 1.12" | 1.5" | 0.257" | 1.75" | 1.75" | 0.05" | 0.06" | Durometer 45A | 0° to 170° | No | 4 | 0.166" | 1.375" | 0000000 | 0000 | 0000000 | 0000 |
| 45 | 1" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 50A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
| 90 | 1.81" | 2" | 0.391" | 2.25" | 2.25" | 0.062" | 0.06" | Durometer 53A | 0° to 170° | No | 4 | 0.196" | 1.75" | 0000000 | 00000 | 0000000 | 0000 |
Horizontal-Force Bolt-Down Vibration-Damping Mounts with Unthreaded Hole
1
2 & 3
Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force. They can also be used in compression load applications. Made of stainless steel cable and aluminum, these mounts withstand temperatures up to 500° F and have excellent resistance to corrosion and oils. Use the holes in the base to bolt down these mounts to keep your equipment stationary.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | O'all Ht. | O'all Lg. | O'all Wd. | Bar Wd. | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Stainless Steel with Aluminum Bar | |||||||||||||||
| 1 | 9 | 0.13" | 2 | 0.13" | 1" | 3.1" | 1.2" | 0.4" | -150° to 500° | No | 4 | 0.18" | 2.7" | 0000000 | 000000 |
| 1 | 12 | 0.13" | 3 | 0.13" | 1.4" | 4.4" | 1.6" | 0.5" | -150° to 500° | No | 4 | 0.2" | 3.95" | 00000000 | 00000 |
| 1 | 17 | 0.13" | 4 | 0.13" | 1.3" | 4.4" | 1.5" | 0.5" | -150° to 500° | No | 4 | 0.2" | 3.95" | 0000000 | 00000 |
| 1 | 25 | 0.13" | 7 | 0.13" | 1.1" | 4.4" | 1.3" | 0.5" | -150° to 500° | No | 4 | 0.2" | 3.95" | 0000000 | 00000 |
| 1 | 40 | 0.13" | 12 | 0.13" | 1.5" | 5" | 1.8" | 0.6" | -150° to 500° | No | 4 | 0.26" | 4.5" | 0000000 | 00000 |
| 1 | 55 | 0.13" | 19 | 0.13" | 1.3" | 5" | 1.6" | 0.6" | -150° to 500° | No | 4 | 0.26" | 4.5" | 00000000 | 00000 |
| 1 | 75 | 0.13" | 20 | 0.13" | 1.3" | 5" | 1.7" | 0.6" | -150° to 500° | No | 4 | 0.26" | 4.5" | 0000000 | 00000 |
| 1 | 125 | 0.13" | 39 | 0.13" | 1.6" | 5" | 1.8" | 0.6" | -150° to 500° | No | 4 | 0.26" | 4.5" | 00000000 | 00000 |
| 1 | 175 | 0.13" | 53 | 0.13" | 1.4" | 5" | 1.6" | 0.6" | -150° to 500° | No | 4 | 0.26" | 4.5" | 0000000 | 00000 |
| 2 | 200 | 0.13" | 95 | 0.13" | 2.9" | 6.7" | 3.5" | 1" | -150° to 500° | No | 8 | 0.28" | 1.75", 2.63", 1.75" | 00000000 | 000000 |
| 2 | 300 | 0.13" | 60 | 0.13" | 2.8" | 8.5" | 3.3" | 1" | -150° to 500° | No | 8 | 0.28" | 1.75", 2.63", 1.75" | 0000000 | 000000 |
| 2 | 500 | 0.13" | 105 | 0.13" | 3.5" | 8.5" | 4.1" | 1" | -150° to 500° | No | 8 | 0.33" | 1.75", 2.63", 1.75" | 0000000 | 000000 |
| 3 | 900 | 0.13" | 200 | 0.13" | 3.9" | 10.5" | 4.4" | 1" | -150° to 500° | No | 8 | 0.41" | 2.15", 3.23", 2.15" | 0000000 | 000000 |
General Purpose Bolt-Down Vibration-Damping Mounts with Threaded Hole
1
2
3
4
5
6
7
These mounts bolt to your mounting surface to keep your equipment stationary. Use them in compression load applications with rotating equipment such as fans, blowers, pumps, compressors, and generators.
Neoprene rubber has good resistance to oil and gasoline.
Silicone rubber withstands higher temperatures than neoprene rubber.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | ||
Black Neoprene Rubber with Steel Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 50 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 00000 |
| 1 | 5/16"-18 | __ | 80 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 1 | 5/16"-18 | __ | 110 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 1 | 5/16"-18 | __ | 160 | 0.12" | 1" | 1.2" | 3.13" | 1.75" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 2.38" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 130 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 250 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 350 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 3/8"-16 | __ | 480 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 130 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 40A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 250 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 50A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 350 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 60A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 2 | 1/2"-20 | __ | 480 | 0.12" | 1.12" | 1.83" | 3.75" | 2.25" | Durometer 70A | 10° to 180° | __ | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3 | 1/2"-13 | __ | 1,500 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 1,500 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 60 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 48A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 100 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 130 | 0.2" | 1.5" | 1.53" | 4.41" | 2" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 200 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 56A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 260 | 0.2" | 1.5" | 1.53" | 4.41" | 4" | Durometer 64A | -20° to 180° | __ | No | 2 | 0.41" | 3.75" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 700 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 1,000 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 1,500 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 1,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 2,000 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 2,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 1/2"-13 | __ | 3,000 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 1/2"-13 | __ | 4,400 | 0.19" | 1.61" | 5.31" | 7.25" | 3" | Durometer 80A | -20° to 180° | __ | No | 2 | 0.44" | 6.25" | 000000000 | 000000 |
| 4 | 3/4"-10 | __ | 700 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 3/4"-10 | __ | 1,000 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | 3/4"-10 | __ | 1,500 | 0.25" | 1.5" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 700 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 40A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 1,000 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 1,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 4 | M12 | 1.75 | 2,500 | 0.25" | 1.61" | 3.125" | 5.125" | 3" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.44" | 4.125" | 000000000 | 00000 |
| 5 | 5/16"-18 | __ | 45 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 30A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 5/16"-18 | __ | 75 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 0000000 | 00000 |
| 5 | 5/16"-18 | __ | 125 | 0.35" | 1.5" | 1.19" | 3.19" | 1.63" | Durometer 50A | -20° to 225° | __ | No | 2 | 0.31" | 2.38" | 00000000 | 00000 |
| 5 | 3/8"-16 | __ | 150 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 40A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | __ | 380 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 0000000 | 00000 |
| 5 | 3/8"-16 | __ | 600 | 0.4" | 1.88" | 1.75" | 3.88" | 2.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.31" | 3" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 600 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 60A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 1,000 | 0.5" | 2.75" | 2.56" | 5.5" | 3.31" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 4.13" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 2,100 | 0.5" | 2.75" | 3.38" | 6.25" | 4" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5" | 00000000 | 00000 |
| 5 | 1/2"-13 | __ | 4,300 | 0.5" | 2.75" | 3.38" | 6.75" | 4.38" | Durometer 70A | -20° to 225° | __ | No | 2 | 0.5" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | __ | 1,500 | 0.03" | 1.19" | 4" | 7" | 2.5" | Durometer 65A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 00000 |
| 6 | 5/8"-11 | __ | 3,000 | 0.03" | 1.19" | 4" | 7" | 4" | Durometer 60A | 0° to 180° | __ | No | 2 | 0.66" | 5.5" | 00000000 | 000000 |
Black Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 35 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 35 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 135 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 135 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 30A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
Gray Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 4,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 4,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 70A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Green Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 3,000 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 3,000 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 60A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Green Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 45 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 45 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 170 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 170 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 250 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 250 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 40A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
Orange Silicone Rubber with Silicone Rubber Base | |||||||||||||||||
| 1 | 5/16"-18 | __ | 70 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 70 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 120 | 0.2" | 1" | 1.25" | 3.13" | 1.75" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 5/16"-18 | __ | 120 | 0.4" | 1.25" | 1.25" | 3.13" | 1.75" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 2.38" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 240 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 240 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 380 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 380 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 550 | 0.25" | 1.25" | 1.75" | 3.88" | 2.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 3/8"-16 | __ | 550 | 0.5" | 1.75" | 1.75" | 3.88" | 2.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.34" | 3" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 525 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 525 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 50A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 750 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 750 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 60A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 1,100 | 0.25" | 1.75" | 2.5" | 5.5" | 3.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
| 1 | 1/2"-13 | __ | 1,100 | 0.5" | 2.88" | 2.5" | 5.5" | 3.38" | Durometer 70A | -80° to 300° | __ | No | 2 | 0.56" | 4.13" | 0000000 | 00000 |
Red Neoprene Rubber with Steel Base | |||||||||||||||||
| 3 | 1/2"-13 | __ | 2,250 | 0.25" | 1.63" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
| 3 | 1/2"-13 | __ | 2,250 | 0.5" | 2.75" | 3" | 6.25" | 4.63" | Durometer 50A | -20° to 180° | __ | No | 2 | 0.56" | 5" | 000000000 | 00000 |
Neoprene Rubber | |||||||||||||||||
| 7 | 1/4"-20 | __ | 14 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 40A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | __ | 24 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 50A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 1/4"-20 | __ | 60 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | Durometer 68A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.2" | 1.938" | 00000000 | 00000 |
| 7 | 3/8"-16 | __ | 50 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 44A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
| 7 | 3/8"-16 | __ | 110 | 0.01" | 1.5" | 3" | 3" | 3" | Durometer 70A | -20° to 180° | Zinc-Plated Steel Cover | No | 4 | 0.27" | 2.5" | 00000000 | 00000 |
Fail-Safe Bolt-Down Vibration-Damping Mounts with Threaded Hole
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails. They minimize vibration and noise from machinery to reduce maintenance costs, prolong equipment life, and protect floors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base | |||||||||||||||
| 1/4"-20 | __ | 46 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 30A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 00000 |
| 1/4"-20 | __ | 87 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 40A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 1/4"-20 | __ | 115 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 50A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 1/4"-20 | __ | 137 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 60A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| 5/16"-18 | __ | 85 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 170 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 250 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 5/16"-18 | __ | 340 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| 3/8"-16 | __ | 210 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 210 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 0000000 | 0000 |
| 3/8"-16 | __ | 360 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 370 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 520 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 520 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 680 | 0.1" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 3/8"-16 | __ | 680 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 00000000 | 0000 |
| 3/8"-16 | __ | 750 | 0.08" | 1.12" | 1.78" | 3.75" | 2.27" | Durometer 70A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| 1/2"-13 | __ | 471 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 30A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 713 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 40A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 940 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 50A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 1/2"-13 | __ | 1,064 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 60A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| 3/4"-10 | __ | 900 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 30A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 1,106 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 1,630 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 2,270 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 30A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 2,500 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| 3/4"-10 | __ | 3,520 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 40A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 4,124 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 50A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| 3/4"-10 | __ | 6,600 | 0.17" | 2.25" | 4.12" | 7.41" | 5.1" | Durometer 60A | 10° to 180° | No | 2 | 0.63" | 6" | 000000000 | 00000 |
| M6 | 1 | 46 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 30A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 87 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 40A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 115 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 50A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M6 | 1 | 137 | 0.05" | 0.75" | 0.92" | 2.27" | 1.25" | Durometer 60A | 10° to 180° | No | 2 | 0.26" | 1.75" | 000000000 | 0000 |
| M8 | 1.25 | 85 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 170 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 210 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 30A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 250 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 340 | 0.08" | 1.02" | 1.2" | 3.13" | 1.73" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 2.38" | 000000000 | 0000 |
| M8 | 1.25 | 360 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 40A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 520 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 50A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M8 | 1.25 | 680 | 0.1" | 1.25" | 1.86" | 3.81" | 2.32" | Durometer 60A | 10° to 180° | No | 2 | 0.34" | 3" | 000000000 | 0000 |
| M12 | 1.75 | 470 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 30A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 715 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 40A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 940 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 50A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M12 | 1.75 | 1,064 | 0.13" | 1.78" | 2.42" | 5.5" | 3.37" | Durometer 60A | 10° to 180° | No | 2 | 0.51" | 4.12" | 000000000 | 00000 |
| M20 | 2.5 | 900 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 30A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 1,106 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 40A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 1,630 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 50A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
| M20 | 2.5 | 2,500 | 0.13" | 1.84" | 3.1" | 6.41" | 4.09" | Durometer 60A | 10° to 180° | No | 2 | 0.53" | 5" | 000000000 | 00000 |
Extreme-Force Bolt-Down Vibration-Damping Mounts with Threaded Hole
Spring action provides significant isolation of vibration and noise. These mounts are great for high-impact applications such as punch presses and hammers and machines operating as slowly as 500 rpm. A rubber pad is bonded to the base to limit movement. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Mounts are for use in compression load applications. An adjustment bolt with locking nut lets you use mounts for leveling. For best results, adjust the leveling bolt so the plate is 1/4"- 1/2" above the top of the base.
Mounts with 2 or 4 springs meet ANSI/ASHRAE 171 seismic testing standards for resistance to wind and seismic loads. They provide isolation of vibration in all directions during earthquakes.
For technical drawings and 3-D models, click on a part number.
Mounts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Replacement Springs | ||||||||||||||
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Base Lg. | Base Wd. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Specifications Met | Each | Each | ||
Steel with Iron Base and Plate and Zinc-Plated Steel Stud | |||||||||||||||
Number of Springs—1 | |||||||||||||||
| 3/8"-16 | 3" | 50 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 000000 | 0000000 | 00000 |
| 3/8"-16 | 3" | 100 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 150 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 250 | 0.83" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 370 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3/8"-16 | 3" | 520 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 675 | 1.32" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 900 | 1.02" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,200 | 0.9" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1/2"-13 | 3 1/2" | 1,785 | 0.88" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | __ | 0000000 | 00000 | 0000000 | 00000 |
Steel with Steel Base and Plate and Zinc-Plated Steel Stud | |||||||||||||||
Number of Springs—2 | |||||||||||||||
| 3/4"-16 | 5" | 280 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 500 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 770 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,260 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,530 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,710 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 1,860 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 2,060 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 2,960 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 3/4"-16 | 5" | 4,260 | 1.5" | 7" | 12" | 8" | -20° to 155° | No | 0.688" | 10.25" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
Number of Springs—4 | |||||||||||||||
| 1-14 | 6" | 560 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 1,000 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 1,540 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 2,520 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,060 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,420 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 3,720 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 4,120 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 5,920 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
| 1-14 | 6" | 8,520 | 1.5" | 7.5" | 17" | 8" | -20° to 155° | No | 0.813" | 15.125" | ANSI/ASHRAE Standard 171 | 0000000 | 000000 | 0000000 | 00000 |
Adjustable Extreme-Force Bolt-Down Vibration-Damping Mounts with Threaded Hole
Connect these mounts to your air supply for vibration and shock isolation in compression load applications. They handle the high impact of equipment such as punch presses, blowers, forging hammers, shakers, vibrators, and air compressors. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. You can add or release air for leveling (±1/4" adjustment).
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Dia. | Ht. | Base Lg. | Base Wd. | Hardness | Max. Pressure, psi | Temperature Range, °F | Features | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Aluminum Base and Aluminum Plate | |||||||||||||||||
| 3/8"-16 | 100 | 1" | 2.5" | 2.88" | 2" | 3" | 3" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 0000000 |
| 1/2"-13 | 300 | 1" | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | Durometer 60A | 60 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 000000 |
| 1/2"-13 | 600 | 1.5" | 3.5" | 5" | 2.94" | 5.12" | 5.12" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M10 | 100 | 0.5" | 2.5" | 2.89" | 1.94" | 3" | 3" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 2.38" | 00000000 | 00000 |
| M12 | 300 | 0.5" | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 3.5" | 00000000 | 00000 |
| M12 | 550 | 0.5" | 3.5" | 5" | 2.94" | 5.13" | 5.13" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 4.25" | 00000000 | 000000 |
| M12 | 1,200 | 0.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| M16 | 2,400 | 0.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 65A | 85 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
Neoprene Rubber with Aluminum Base and Steel Plate | |||||||||||||||||
| 1/2"-13 | 1,200 | 1.5" | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.3" | 6" | 00000000 | 000000 |
| 5/8"-11 | 2,400 | 1.5" | 3.5" | 9.66" | 2.94" | 10" | 10" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 8.5" | 00000000 | 000000 |
| 5/8"-11 | 4,800 | 1.5" | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | Durometer 60A | 80 | -20° to 180° | 0.30" Dia. Threaded Air Inlet | No | 4 | 0.56" | 12" | 00000000 | 000000 |
Seismic Bolt-Down Vibration-Damping Mounts with Threaded Hole
Limit damage during moderate earthquakes. These mounts have a seismic rating of 1g (acceleration of gravity) and dissipate vibration and noise in compression and shear load applications. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Neoprene rubber has good resistance to oil and gasoline. Mounts come with a bolt and washer for height adjustment.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Shear Capacity per Mount, lbs. | Deflection @ Shear Capacity | O'all Ht. | Dia. | Base Lg. | Base Wd. | Hardness | Temperature Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | |
Neoprene Rubber with Steel Base and Cadmium-Plated Steel Bolt | ||||||||||||||||
| 1/2"-13 | 1 1/4" | 250 | 0.15" | 200 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 30A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 000000 |
| 1/2"-13 | 1 1/4" | 525 | 0.15" | 420 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 45A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 1/2"-13 | 1 1/4" | 1,000 | 0.15" | 800 | 0.09" | 1.875" | 2.75" | 4.75" | 3" | Durometer 60A | -20° to 225° | No | 0.438" | 3.875", 2" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 1,400 | 0.15" | 400 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 40A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 2,100 | 0.15" | 600 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 50A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |
| 5/8"-11 | 1 1/4" | 3,500 | 0.15" | 1,000 | 0.09" | 1.875" | 3.5" | 6.25" | 3.75" | Durometer 60A | -20° to 225° | No | 0.563" | 5", 2.5" | 0000000 | 00000 |