About Durometer Hardness Scales
More
About Leveling Mounts
More
About Vibration-Damping Mounts
More
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Stud
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Performance | Each | |
Nickel-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 20,000 | 4" | 5 3/8" | -20° to 170° | __ | 0000000 | 000000 |
1"-8 | 4 1/4" | 20,000 | 4" | 6 1/8" | -20° to 170° | __ | 00000000 | 00000 |
1"-8 | 6" | 20,000 | 4" | 7 7/8" | -20° to 170° | __ | 0000000 | 00000 |
1"-8 | 8" | 20,000 | 4" | 9 7/8" | -20° to 170° | __ | 0000000 | 00000 |
Nickel-Plated Steel with Rubber Cushion | ||||||||
1"-8 | 3 1/2" | 15,000 | 4" | 5 1/2" | -20° to 170° | Antislip | 00000000 | 00000 |
1"-8 | 4 1/4" | 15,000 | 4" | 6 1/4" | -20° to 170° | Antislip | 00000000 | 00000 |
1"-8 | 6" | 15,000 | 4" | 8" | -20° to 170° | Antislip | 00000000 | 00000 |
1"-8 | 8" | 15,000 | 4" | 10" | -20° to 170° | Antislip | 00000000 | 00000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Stud
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Yellow Zinc-Plated Steel | |||||||
---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 20,000 | 4" | 5 3/8" | -20° to 170° | 0000000 | 000000 |
1"-8 | 6" | 20,000 | 4" | 7 7/8" | -20° to 170° | 0000000 | 00000 |
1"-8 | 8" | 20,000 | 4" | 9 7/8" | -20° to 170° | 0000000 | 00000 |
Yellow Zinc-Plated Steel with Rubber Cushion | |||||||
1"-8 | 3 1/2" | 15,000 | 4" | 5 1/2" | -20° to 170° | 0000000 | 00000 |
1"-8 | 6" | 15,000 | 4" | 8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 8" | 15,000 | 4" | 10" | -20° to 170° | 00000000 | 00000 |
Black-Oxide Steel Swivel Leveling Mounts with Threaded Stud
Black-oxide steel has a dull shine for areas where appearance is a concern. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Black Oxide Steel with Zinc-Plated Steel Stud | ||||||||
---|---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 20,000 | 4" | 5 3/8" | 1 3/8" | -20° to 170° | 00000000 | 000000 |
1"-8 | 6" | 20,000 | 4" | 7 7/8" | 1 3/8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 8" | 20,000 | 4" | 9 7/8" | 1 3/8" | -20° to 170° | 00000000 | 00000 |
Black Oxide Steel with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||
1"-8 | 3 1/2" | 15,000 | 4" | 5 1/2" | 1 3/8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 6" | 15,000 | 4" | 8" | 1 3/8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 8" | 15,000 | 4" | 10" | 1 3/8" | -20° to 170° | 00000000 | 00000 |
Plastic Swivel Leveling Mounts with Threaded Stud
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||
---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 2,400 | 4" | 5 3/8" | -20° to 170° | 0000000 | 000000 |
1"-8 | 6" | 2,400 | 4" | 7 7/8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 8" | 2,400 | 4" | 9 7/8" | -20° to 170° | 00000000 | 00000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||
1"-8 | 3 1/2" | 2,400 | 4" | 5 1/2" | -20° to 170° | 00000000 | 00000 |
1"-8 | 6" | 2,400 | 4" | 8" | -20° to 170° | 00000000 | 00000 |
1"-8 | 8" | 2,400 | 4" | 10" | -20° to 170° | 00000000 | 00000 |
Corrosion-Resistant Swivel Leveling Mounts with Threaded Stud
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Swivel Range of Motion | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
303 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 20,000 | 7.5° | 4" | 5 3/8" | 1 3/8" | -20° to 170° | 0000000 | 000000 |
1"-8 | 4 1/2" | 20,000 | 7.5° | 4" | 6 1/8" | 1 3/8" | -20° to 170° | 00000000 | 000000 |
1"-8 | 6" | 20,000 | 7.5° | 4" | 7 7/8" | 1 3/8" | -20° to 170° | 0000000 | 000000 |
1"-8 | 8" | 20,000 | 7.5° | 4" | 9 7/8" | 1 3/8" | -20° to 170° | 0000000 | 000000 |
303 Stainless Steel with Rubber Cushion | |||||||||
1"-8 | 3 1/2" | 15,000 | 7.5° | 4" | 5 1/2" | 1 3/8" | 0° to 180° | 0000000 | 000000 |
1"-8 | 4 1/4" | 15,000 | 7.5° | 4" | 6 1/4" | 1 3/8" | 0° to 180° | 0000000 | 000000 |
1"-8 | 6" | 15,000 | 7.5° | 4" | 8" | 1 3/8" | 0° to 180° | 0000000 | 000000 |
1"-8 | 8" | 15,000 | 7.5° | 4" | 10" | 1 3/8" | 0° to 180° | 0000000 | 000000 |
Super-Corrosion-Resistant Swivel Leveling Mounts with Threaded Stud
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Bolt-Down Swivel Leveling Mounts with Threaded Stud
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temp. Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Performance | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||||||||
1"-8 | 6" | 10,000 | 5" | 8 1/4" | 1 3/8" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | Stay Put | 0000000 | 000000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||||||||
1"-8 | 6" | 10,000 | 5" | 8 9/16" | 1 3/8" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | Antislip, Stay Put | 0000000 | 00000 |
1"-8 | 8" | 2,700 | 4 3/8" | 9 11/16" | 1 1/2" | -20° to 170° | No | 2 | 13/32" | 2 31/32" | Antislip, Stay Put | 00000000 | 00000 |
Corrosion-Resistant Bolt-Down Swivel Leveling Mounts with Threaded Stud
Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance. Use the punch-out holes in the base to bolt down mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Each | |
Plastic with 303 Stainless Steel Stud | |||||||||||
1"-8 | 6" | 10,000 | 5" | 8 1/4" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 0000000 | 000000 |
Plastic with Rubber Cushion and 303 Stainless Steel Stud | |||||||||||
1"-8 | 6" | 10,000 | 5" | 8 9/16" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 0000000 | 00000 |
Offset Bolt-Down Swivel Leveling Mounts with Threaded Stud
An offset mounting hole allows you to secure these mounts without moving your machine. They have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Base Lg. | Base Wd. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Each | |
Plastic with Zinc-Plated Steel Stud | ||||||||||||
1"-8 | 6" | 7,500 | 5 7/16" | 4" | 7 5/16" | 1 3/8" | -20° to 170° | No | 1 | 1/2" | 0000000 | 000000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | ||||||||||||
1"-8 | 6" | 7,500 | 5 7/16" | 4" | 7 1/2" | 1 3/8" | -20° to 170° | No | 1 | 1/2" | 0000000 | 00000 |
Yellow Zinc-Plated Steel Swivel Leveling Mounts with Threaded Hole
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Nickel-Plated Steel Swivel Leveling Mounts with Threaded Hole
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Black-Oxide Steel Swivel Leveling Mounts with Threaded Hole
Black-oxide steel has a dull shine for areas where appearance is a concern. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Plastic Swivel Leveling Mounts with Threaded Hole
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base. They have a ball-and-socket design that swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Swivel Leveling Mounts with Threaded Hole
Made of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a rubber cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Super-Corrosion-Resistant Swivel Leveling Mounts with Threaded Hole
Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Each | |
316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
1"-8 | 13/16" | 20,000 | 4" | 1 7/8" | 1 3/8" | 00000000 | 0000000 |
Bolt-Down Swivel Leveling Mounts with Threaded Hole
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Cap. per Mount, lbs. | Base Dia. | Overall Ht. | Hex Nut Wd. | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Each | |
Plastic with Zinc-Plated Steel Hex Nut | ||||||||||||
1"-8 | 13/16" | 7,500 | 4" | 2 3/8" | 1 3/8" | -20° to 170° | No | 2 | 7/16" | 2 11/16" | 000000000 | 000000 |
1"-8 | 13/16" | 10,000 | 5" | 3" | 1 3/8" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 00000000 | 00000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Hex Nut | ||||||||||||
1"-8 | 13/16" | 7,500 | 4" | 2 7/16" | 1 3/8" | -20° to 170° | No | 2 | 7/16" | 2 11/16" | 000000000 | 00000 |
1"-8 | 13/16" | 10,000 | 5" | 3 5/16" | 1 3/8" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 00000000 | 00000 |
Corrosion-Resistant Bolt-Down Swivel Leveling Mounts with Threaded Hole
Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance. Use the punch-out holes in the base to bolt down mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Base Dia. | Overall Ht. | Temperature Range, °F | Mounting Fasteners Included | Number of | Dia. | Ctr.-to-Ctr. Lg. | Each | |
Plastic with 303 Stainless Steel Hex Nut | |||||||||||
1"-8 | 13/16" | 7,500 | 4" | 2 3/8" | -20° to 170° | No | 2 | 7/16" | 2 11/16" | 000000000 | 000000 |
1"-8 | 13/16" | 10,000 | 5" | 3" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 00000000 | 00000 |
Plastic with Rubber Cushion and 303 Stainless Steel Hex Nut | |||||||||||
1"-8 | 13/16" | 7,500 | 4" | 2 7/16" | -20° to 170° | No | 2 | 7/16" | 2 11/16" | 000000000 | 00000 |
1"-8 | 13/16" | 10,000 | 5" | 3 5/16" | -20° to 170° | No | 2 | 1/2" | 3 7/8" | 00000000 | 00000 |
Sanitary Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas. They also create space to clean underneath machinery. All have a hygienic thread cover that prevents contaminants from settling in the grooves. To further block out contaminants as the mount moves, as well as prevent unsanitary metal-to-metal connections, there is a silicone seal at each end of the thread cover and at the point where the mount swivels. These seals have chemical additives, so you can find them with an X-ray machine if a piece falls into your line. This helps you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility. Seals are also FDA compliant for direct contact with food.
Made of 304 stainless steel, these mounts won’t corrode from frequent washdowns with harsh cleaners and sanitizers. Their smooth finish and rounded edges leave no crevices for bacteria to grow in, reducing the chance of foodborne illnesses. They also don’t have any horizontal ledges, so liquids and food will drain off completely. Certified by 3-A, EHEDG, and USDA, they meet sanitary design standards.
The rubber cushion on the bottom reduces vibration and noise from machinery, which protects floors and extends machine life. Their grip on the floor minimizes bacteria growth beneath them and prevents machines from shifting.
These mounts swivel to level machinery on slightly uneven floors; for severely uneven floors, use the threaded stud to raise each mount to a level height.
Some mounts have mounting holes to secure them to the floor, keeping machinery stationary. Mounts with two mounting holes reduce vibration by anchoring machinery to the floor on both sides.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Mounting Ht. | Cap. per Mount, lbs. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Overall Ht. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Performance Properties | Specifications Met | Performance | Each | |
304 Stainless Steel with Rubber Cushion | ||||||||||||||||
1"-8 | 3 3/8" | 4 3/8"-5 3/4" | 7,100 | Not Rated | 10° | 4 15/16" | 7 1/4" | -30° to 230° | __ | __ | __ | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 0000000 |
304 Stainless Steel with Rubber Cushion—Two Mounting Holes | ||||||||||||||||
1"-8 | 5 7/8" | 4"-5 3/8" | 17,400 | Not Rated | 9° | 4 1/16" | 6 7/8" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 000000 |
1"-8 | 8 1/4" | 5 3/16"-7 3/4" | 17,400 | Not Rated | 9° | 4 1/16" | 9 1/4" | -30° to 230° | No | 1/2" | 3 1/8" | X-Ray Detectable | 3-A Certified 88-00, EHEDG Certified, FDA Compliant 21 CFR 177.2600, USDA Accepted Equipment | Antislip, Vibration Damping | 0000000 | 000000 |
Extreme-Force Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Higher deflection ratings translate to greater vibration and shock isolation. These mounts have a rubber base that grips the floor for stability and is resistant to oil and grease. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Swivel Range of Motion | Base Dia. | Base Ht. | Overall Ht. | Hardness | Hardness Rating | Temp. Range, °F | Each | |
Rubber with Zinc-Plated Steel Stud | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1"-8 | 4 1/4" | 3,700 | 0.13" | 7.5° | 5" | 1 1/2" | 5 7/8" | Durometer 50A | Medium | -20° to 180° | 00000000 | 0000000 |
1"-8 | 4 1/4" | 8,000 | 0.13" | 7.5° | 5" | 1 1/2" | 5 7/8" | Durometer 70A | Hard | -20° to 180° | 00000000 | 000000 |
Swivel Vibration-Damping Leveling Mounts with Threaded Stud
Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're yellow zinc plated for corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | O'all Ht. | Hex Nut Wd. | Temperature Range, °F | Each | |
Yellow Zinc-Plated Steel with Black Rubber Cushion | |||||||||
---|---|---|---|---|---|---|---|---|---|
1"-8 | 3 1/2" | 4,500 | 0.06" | 4" | 6" | 1 3/8" | -20° to 170° | 0000000 | 000000 |
Yellow Zinc-Plated Steel with Brown Rubber Cushion | |||||||||
1"-8 | 3 1/2" | 11,800 | 0.08" | 4" | 6" | 1 3/8" | -20° to 170° | 0000000 | 00000 |
Swivel Vibration-Damping Leveling Mounts with Threaded Hole
Use these mounts to minimize vibration and noise to prolong machine life and protect floors. Their ball-and-socket design swivels to compensate for uneven floors. Add your own threaded stud or bolt to build a mount that fits your needs. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection. They're yellow zinc plated for corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Dp. | Capacity per Mount, lbs. | Deflection @ Capacity | Base Dia. | Overall Ht. | Hex Nut Wd. | Temp. Range, °F | Performance | Each | |
Yellow Zinc-Plated Steel with Black Rubber Cushion | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1"-8 | 11/16" | 4,500 | 0.06" | 4" | 2 1/2" | 1 3/8" | -20° to 170° | Antislip, Vibration Damping | 0000000 | 000000 |
Yellow Zinc-Plated Steel with Brown Rubber Cushion | ||||||||||
1"-8 | 11/16" | 11,800 | 0.08" | 4" | 2 1/2" | 1 3/8" | -20° to 170° | Antislip, Vibration Damping | 0000000 | 00000 |
Threaded Bumpers
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with a medium and medium-soft rating offer a balance of cushioning and impact resistance. The softer the bumper, the more it cushions.
Bumpers with an extra-hard, hard, and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Buna-N bumpers resist abrasion, oil, and grease.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Buna-N Rubber with Steel Core | |||||||||||
1"-8 | 1" | 2 1/4" | 2 1/4" | -60° to 175° | Yes | Medium Soft | Durometer 40A | Yes | White | 00000000 | 000000 |
Neoprene Rubber with Steel Core | |||||||||||
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 00000 |
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 0000000 | 00000 |
1"-8 | 1 1/4" | 3" | 2 3/4" | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 00000 |
1"-8 | 1 1/4" | 3" | 2 3/4" | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 0000000 | 00000 |
Polyurethane Rubber with Steel Core | |||||||||||
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Extra Hard | Durometer 95A | No | Black | 00000000 | 00000 |
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 0000000 | 00000 |
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Medium | Durometer 50A | No | Red | 00000000 | 00000 |
1"-8 | 1" | 2 1/4" | 2 1/4" | -40° to 200° | Yes | Medium Hard | Durometer 60A | No | Black | 00000000 | 00000 |
1"-8 | 1 1/4" | 3" | 2 3/4" | -40° to 200° | Yes | Extra Hard | Durometer 90A | No | Red | 00000000 | 00000 |
1"-8 | 1 1/4" | 3" | 2 3/4" | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 0000000 | 00000 |
1"-8 | 1 1/4" | 3" | 2 3/4" | -40° to 200° | Yes | Medium Hard | Durometer 60A | No | Red | 00000000 | 00000 |
Swiveling Tips for Screws and Threaded Studs
Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
Nonmarring Swiveling Tips for Screws and Threaded Studs
The contact area is covered in plastic to protect soft metal and polished surfaces. Attach these tips to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.