System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Adjustability Adjustability |
---|
![]() | Swivel |
Mount Type Mount Type |
---|
|
Base Material Base Material |
---|
|
Stud Material Stud Material |
---|
|
Overall Height Overall Height |
---|
|
|
Shape Shape |
---|
![]() | ![]() |
Hex | Pointed |
![]() | ![]() |
Round | Tapered Round |
Thread Type Thread Type |
---|
|
Capacity per Mount Capacity per Mount |
---|
|
Base Shape Base Shape |
---|
|
Hardness Rating Hardness Rating |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Stud Finish Stud Finish |
---|
|
More
More
Nickel-plated steel has some corrosion resistance. Mounts have a ball-and-socket design that swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Made entirely of stainless steel, these mounts resist corrosion from water and most chemicals. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Each | |
303 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M10 | 1.5 | 51 | 3,740 | 32 | 73 | 16 | 0000000 | 000000 |
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Each | |
316 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M10 | 1.5 | 51 | 3,740 | 32 | 73 | 16 | 0000000 | 000000 |
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary. Their ball-and-socket design swivels to compensate for uneven floors. In addition to leveling, mounts raise equipment off the floor for easier cleaning and inspection.
Mounts with a cushion are nonskid for an extra measure of stability.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Thread Lg., mm | Capacity per Mount, lbs. | Base Dia., mm | Overall Ht., mm | Hex Nut Wd., mm | Temperature Range, °F | Mounting Fasteners Included | No. of | Dia., mm | Ctr.-to-Ctr. Lg., mm | Each | |
Plastic with Zinc-Plated Steel Stud | |||||||||||||
M10 | 1.5 | 76 | 4,000 | 51 | 105 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 0000000 | 00000 |
M10 | 1.5 | 76 | 5,000 | 76 | 104 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
M10 | 1.5 | 102 | 4,000 | 51 | 130 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 0000000 | 00000 |
M10 | 1.5 | 102 | 5,000 | 76 | 130 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 0000000 | 0000 |
M10 | 1.5 | 152 | 4,000 | 51 | 181 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 00000000 | 00000 |
M10 | 1.5 | 152 | 5,000 | 76 | 181 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
M10 | 1.5 | 203 | 5,000 | 76 | 232 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
Plastic with Rubber Cushion and Zinc-Plated Steel Stud | |||||||||||||
M10 | 1.5 | 76 | 4,000 | 51 | 106.6 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 0000000 | 0000 |
M10 | 1.5 | 76 | 5,000 | 76 | 105.6 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
M10 | 1.5 | 102 | 4,000 | 51 | 131.6 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 0000000 | 00000 |
M10 | 1.5 | 102 | 5,000 | 76 | 131.6 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 0000000 | 0000 |
M10 | 1.5 | 102 | 5,000 | 76 | 182.6 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
M10 | 1.5 | 152 | 4,000 | 51 | 182.6 | 20 | -20° to 170° | No | 2 | 6.4 | 33.8 | 00000000 | 00000 |
M10 | 1.5 | 203 | 5,000 | 76 | 233.6 | 20 | -20° to 170° | No | 2 | 8.9 | 55.9 | 00000000 | 00000 |
Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.
For technical drawings and 3-D models, click on a part number.
For Leg | |||||||||
---|---|---|---|---|---|---|---|---|---|
ID | OD | Capacity per Mount, lbs. | O'all Ht. | Thread Size | Thread Pitch, mm | Thread Dp. | Temp. Range, °F | Each | |
Plastic with Brass Insert | |||||||||
1 5/16" | 1 1/2" | 1,500 | 1 11/16" | M10 | 1.5 | 1" | -20° to 180° | 00000000 | 00000 |
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.
Bumpers with a medium hardness rating offer a balance of cushioning and impact resistance.
Bumpers with a hard hardness rating withstand more impact than softer bumpers.
Rubber bumpers are abrasion resistant. Those with a soft rating can be used outdoors.
Buna-N bumpers withstand a wider range of temperatures than other bumpers and resist abrasion, oil, and grease.
Stainless steel studs are more corrosion resistant than steel studs.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Nonmarking | Color | Stud Material | Each | |
Style 1 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M10 | 1.5 | 27mm | 70mm | 30mm | 1,610 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 000000 |
M10 | 1.5 | 27mm | 70mm | 30mm | 2,930 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 40mm | 920 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 40mm | 3,430 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 55mm | 1,010 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 55mm | 2,130 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 20mm | 580 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 20mm | 1,670 | -40° to 170° | No | Hard | Yes | Black | Steel | 0000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 30mm | 550 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 30mm | 1,210 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 40mm | 550 | -10° to 150° | No | Medium | No | Black | Steel | 000000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 40mm | 1,110 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 50mm | 600 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 50mm | 940 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 20mm | 860 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 20mm | 2,690 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 40mm | 790 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 40mm | 1,040 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 60mm | 780 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 60mm | 1,820 | -40° to 170° | No | Hard | Yes | Black | Steel | 0000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M10 | 1.5 | 27mm | 70mm | 30mm | 1,610 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 0000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 40mm | 920 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
M10 | 1.5 | 27mm | 70mm | 55mm | 1,010 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 20mm | 580 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 30mm | 550 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 40mm | 550 | -10° to 150° | No | Medium | No | Black | Stainless Steel | 000000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 50mm | 600 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 20mm | 780 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 40mm | 790 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 60mm | 60mm | 780 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
Style 2 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M10 | 1.5 | 28mm | 50mm | 50mm | 210 | -40° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 50mm | 250 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 0000 |
M10 | 1.5 | 28mm | 50mm | 68mm | 190 | -10° to 150° | No | Medium | No | Black | Steel | 0000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 68mm | 430 | -40° to 170° | No | Hard | Yes | Black | Steel | 00000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M10 | 1.5 | 28mm | 50mm | 50mm | 210 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 28mm | 50mm | 68mm | 200 | -40° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
Style 7 | |||||||||||||
Buna-N Rubber with Steel Base Plate | |||||||||||||
M10 | 1.5 | 12mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 20mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
M10 | 1.5 | 40mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Steel | 00000000 | 00000 |
Buna-N Rubber with Stainless Steel Base Plate | |||||||||||||
M10 | 1.5 | 12mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 20mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
M10 | 1.5 | 40mm | 50mm | 1 11/16" | 360 | -20° to 170° | No | Medium | Yes | Black | Stainless Steel | 00000000 | 00000 |
All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole. All are nonmarking and can be used outdoors.
Bumpers with a hard rating withstand high levels of impact. Bumpers with a medium-soft rating offer a balance of cushioning and impact resistance.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg. | OD | Ht. | Overall Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Style 1 | |||||||||||||
Neoprene Rubber with Steel Core | |||||||||||||
M10 | 1.5 | 15mm | 32mm | 32mm | 47mm | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 000000 |
M10 | 1.5 | 15mm | 32mm | 32mm | 47mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 00000 |
M10 | 1.5 | 30mm | 32mm | 32mm | 62mm | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 00000 |
M10 | 1.5 | 30mm | 32mm | 32mm | 62mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 00000 |
Polyurethane Rubber with Steel Core | |||||||||||||
M10 | 1.5 | 15mm | 32mm | 32mm | 47mm | -60° to 200° | Yes | Hard | Durometer 75A | No | Red | 00000000 | 00000 |
M10 | 1.5 | 30mm | 32mm | 32mm | 62mm | -60° to 200° | Yes | Hard | Durometer 75A | No | Red | 00000000 | 00000 |
M10 | 1.5 | 30mm | 32mm | 32mm | 62mm | -60° to 200° | Yes | Medium Soft | Durometer 40A | No | Red | 0000000 | 00000 |
Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. All of these bumpers can be used outdoors.
Bumpers with a hard rating withstand high levels of impact. Bumpers with a medium-soft rating offer a balance of cushioning and impact resistance.
Neoprene bumpers have good abrasion resistance.
Polyurethane bumpers have better abrasion resistance than neoprene bumpers. They won't become brittle and crack when exposed to ozone.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch | Dp. | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Neoprene Rubber with Steel Core | ||||||||||||
M10 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Hard | Durometer 75A | No | Black | 00000000 | 000000 |
M10 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Medium Soft | Durometer 40A | No | Black | 00000000 | 0000 |
Polyurethane Rubber with Steel Core | ||||||||||||
M10 | 1.25 mm | 13mm | 32mm | 32mm | -40° to 200° | Yes | Hard | Durometer 85A | No | Red | 00000000 | 00000 |
Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.
Bumpers with a medium hardness rating offer a balance of cushioning and impact resistance.
Rubber bumpers are abrasion resistant. All are nonmarking. Those with a soft rating can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch | Dp. | OD | Ht. | Max. Load, lbs. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Style 1 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M10 | 1.5 mm | 10mm | 50mm | 20mm | 580 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 50mm | 30mm | 550 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 0000 |
M10 | 1.5 mm | 10mm | 50mm | 40mm | 550 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 70mm | 40mm | 920 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 70mm | 55mm | 1,010 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
Rubber with Stainless Steel Base Plate | |||||||||||||
M10 | 1.5 mm | 10mm | 50mm | 20mm | 580 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 50mm | 30mm | 550 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 50mm | 40mm | 550 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 70mm | 40mm | 920 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
M10 | 1.5 mm | 10mm | 70mm | 55mm | 1,010 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 000000000 | 00000 |
Style 2 | |||||||||||||
Rubber with Steel Base Plate | |||||||||||||
M10 | 1.5 mm | 10mm | 50mm | 68mm | 190 | -20° to 150° | No | Medium | Durometer 55A | Yes | Black | 0000000 | 00000 |
Use these buttons to support and position workpieces and fixtures from the bottom or side. Their hex shape lets you screw them into a threaded hole with a wrench or socket. Threading makes these buttons easier to replace than press-fit, so they are a good choice for high-wear applications. They’re also known as rest buttons.
Thread | |||||||
---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Size | Lg., mm | Lg. Tolerance, mm | Specifications Met | Each | |
Steel | |||||||
20 | 17 | M10 | 16 | -0.2 to 0.2 | DIN 6320 | 0000000 | 00000 |
Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
For technical drawings and 3-D models, click on a part number.
Dia. | Ht. | Load Capacity, lbs. | Thread Size | Range of Motion | Each | |
Steel | ||||||
---|---|---|---|---|---|---|
19mm | 23mm | 1,455 | M10 | 20° | 0000000 | 000000 |
Hold a workpiece securely from the side with minimal contact, leaving more of the workpiece free for machining. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.
Head | Thread | Drive | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Size | Pitch, mm | Lg., mm | Size | Style | Head Material | Screw Material | Each | |
20.61 | 6.35 | 1.27 | 1,950 | M10 | 1.5 | 19 | 7 mm | Hex | Brass | Steel | 00000000 | 00000 |
Head | Thread | Drive | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Size | Pitch, mm | Lg., mm | Size | Style | Head Material | Screw Material | Pkg. Qty. | Pkg. | |
20.61 | 6.35 | 1.27 | 1,950 | M10 | 1.5 | 19 | 7 mm | Hex | Brass | Steel | 10 | 00000000 | 000000 |
Install these clamps into a slot in your fixture to grip at the bottom of workpiece edges, giving the cutting tool maximum access to your workpiece. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.
Blunt edge is less likely to mar your workpiece.
Head | Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Min. Workpiece Contact, mm | For Slot Dp., mm | Size | Lg., mm | Size | Style | Head Material | Screw Material | Each | |
Blunt Edge | ||||||||||||||
25.4 | 25.4 | 17.8 | 1.27 | 5,845 | 6.35 | 11.43 | M10 | 18.03 | 8 mm | Hex | Steel | Steel | 0000000 | 000000 |
Head | Thread | Drive | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Min. Workpiece Contact, mm | For Slot Dp., mm | Size | Lg., mm | Size | Style | Head Material | Screw Material | Pkg. Qty. | Pkg. | |
Blunt Edge | |||||||||||||||
25.4 | 25.4 | 17.8 | 1.27 | 5,845 | 6.35 | 11.43 | M10 | 18.03 | 8 mm | Hex | Steel | Steel | 4 | 0000000 | 000000 |