System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Thread Pitch Thread Pitch |
---|
|
Clamping Action Clamping Action |
---|
![]() | Push Only |
Drive Size Drive Size |
---|
|
Screw Material Screw Material |
---|
|
Edge Style Edge Style |
---|
|
Head Material Head Material |
---|
|
For Slot Depth For Slot Depth |
---|
|
Head Height Head Height |
---|
|
Head Width Head Width |
---|
|
Head Length Head Length |
---|
|
Height Height |
---|
|
Length Length |
---|
|
Width Width |
---|
|
Material Material |
---|
|
Maximum Head Movement Maximum Head Movement |
---|
|
Minimum Workpiece Contact Minimum Workpiece Contact |
---|
|
Install these clamps into a slot in your fixture to grip at the bottom of workpiece edges, giving the cutting tool maximum access to your workpiece. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.
Blunt edge is less likely to mar your workpiece.
Head | Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Min. Workpiece Contact, mm | For Slot Dp., mm | Size | Lg., mm | Size | Style | Head Material | Screw Material | Each | |
Blunt Edge | ||||||||||||||
9.52 | 9.52 | 5.5 | 0.19 | 625 | 1.9 | 3.55 | M2.5 | 6.6 | 2 mm | Hex | Steel | Steel | 0000000 | 000000 |
Head | Thread | Drive | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Movement, mm | Max. Clamping Force, lbs. | Min. Workpiece Contact, mm | For Slot Dp., mm | Size | Lg., mm | Size | Style | Head Material | Screw Material | Pkg. Qty. | Pkg. | |
Blunt Edge | |||||||||||||||
9.52 | 9.52 | 5.5 | 0.19 | 625 | 1.9 | 3.55 | M2.5 | 6.6 | 2 mm | Hex | Steel | Steel | 8 | 0000000 | 000000 |
Set one of these clamps between two workpieces in a fixture and tighten the screw to push the clamp's sides out for a secure hold. The minimal contact leaves more of the workpieces free for machining.
Thread | Drive | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Clamping Force, lbs. | Size | Pitch, mm | Lg., mm | Size | Style | Material | Screw Material | Wedge Material | Each | |
11.9 | 9.5 | 9.7 | 300 | M2.5 | 0.45 | 12 | 2 mm | Hex | Aluminum | Steel | Steel | 0000000 | 000000 |
Thread | Drive | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., mm | Wd., mm | Ht., mm | Max. Clamping Force, lbs. | Size | Pitch, mm | Lg., mm | Size | Style | Material | Screw Material | Wedge Material | Pkg. Qty. | Pkg. | |
11.9 | 9.5 | 9.7 | 300 | M2.5 | 0.45 | 12 | 2 mm | Hex | Aluminum | Steel | Steel | 6 | 0000000 | 000000 |