McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    6 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Performance

    Performance

    Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    With Rubber Cushion
    Mounting Holes
    Cap. per
    Mount, lb.
    Thread Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Specs.
    Met
    Load
    Pull
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    M30 × 3.5 mm7 1/8"10°5 7/8"3No17/32"4 3/32"NZS 421913,4806,29011 3/8"Buna-N
    		7750N1110000000
     

    Swivel Leveling Mounts with Threaded Stud

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.
    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    Without Cushion

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg., mm
    Swivel Range
    of Motion
    Base Dia.,
    mm
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Cushion
    Material
    Each
    Nickel-Plated Steel Base and Stud
    M30 × 3.5 mm1527.5°15242,5002226111K661000000032,250225Natural Rubber
    		6111K6720000000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    M30 × 3.5 mm1527.5°15242,9902226301K4400000032,295225Natural Rubber
    		6301K47000000
     
    303 Stainless Steel Base and Stud
    M30 × 3.5 mm1527.5°152—————032,200225Natural Rubber
    		6301K121000000
     
    back to top