Material Material |
---|
|
Minimum ID After Shrinking Minimum ID After Shrinking |
---|
|
Performance Properties Performance Properties |
---|
|
Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
---|
![]() | ![]() |
Tubing | Assortments |
Flexibility Flexibility |
---|
![]() | ![]() |
Flexible | Semi-Rigid |
Shrink Temperature Shrink Temperature |
---|
|
More
With excellent resistance to tears and cuts, this tubing withstands demanding use. It also resists chemicals. FEP tubing is more chemical resistant than PVDF tubing, and withstands higher temperatures.
AMS/MIL-DTL-23053/8 and AMS/MIL-DTL-23053/11 tubing meets requirements for material quality.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
ID | ||||||||
---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | For Wire Gauge | For Wire Size | Color | Lengths, ft. | Per Ft. | |
1.3:1 Shrink Ratio | ||||||||
0.031" | 0.027" | 0.01" | 24 | __ | Clear | 00000000 | 00000 | |
0.036" | 0.032" | 0.01" | 22 | __ | Clear | 00000000 | 0000 | |
0.045" | 0.039" | 0.01" | 20 | __ | Clear | 00000000 | 0000 | |
0.06" | 0.049" | 0.01" | 18 | __ | Clear | 00000000 | 0000 | |
0.075" | 0.061" | 0.01" | 16 | __ | Clear | 00000000 | 0000 | |
0.092" | 0.072" | 0.01" | 14 | __ | Clear | 00000000 | 0000 | |
0.115" | 0.089" | 0.01" | 12 | __ | Clear | 00000000 | 0000 | |
0.141" | 0.114" | 0.01" | 10 | __ | Clear | 00000000 | 0000 | |
0.18" | 0.143" | 0.01" | 8 | __ | Clear | 00000000 | 0000 | |
0.225" | 0.18" | 0.01" | 6 | __ | Clear | 00000000 | 0000 | |
0.29" | 0.226" | 0.01" | 4 | __ | Clear | 00000000 | 0000 | |
0.365" | 0.28" | 0.01" | 2 | __ | Clear | 00000000 | 0000 | |
0.44" | 0.349" | 0.01" | 1/0 | __ | Clear | 00000000 | 0000 | |
0.58" | 0.448" | 0.02" | __ | 7/16" | Clear | 00000000 | 0000 | |
0.666" | 0.51" | 0.02" | __ | 1/2" | Clear | 00000000 | 0000 | |
0.83" | 0.637" | 0.03" | __ | 5/8" | Clear | 00000000 | 0000 | |
1" | 0.764" | 0.03" | __ | 3/4" | Clear | 00000000 | 00000 | |
Each | ||||||||
1.6:1 Shrink Ratio | ||||||||
0.094" | 0.056" | 0.01" | __ | 3/32" | Clear | 4 | 00000000 | 00000 |
0.125" | 0.075" | 0.01" | __ | 1/8" | Clear | 4 | 00000000 | 00000 |
0.188" | 0.115" | 0.01" | __ | 3/16" | Clear | 4 | 00000000 | 00000 |
0.25" | 0.15" | 0.01" | __ | 1/4" | Clear | 4 | 00000000 | 0000 |
0.375" | 0.235" | 0.01" | __ | 3/8" | Clear | 4 | 00000000 | 00000 |
0.5" | 0.3" | 0.02" | __ | 1/2" | Clear | 4 | 00000000 | 00000 |
ID | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
1.1" | 0.88" | 0.02" | Clear | 0000000 | ||||||
1.3" | 1" | 0.02" | Clear | 0000000 | ||||||
1.7" | 1.4" | 0.02" | Clear | 0000000 | ||||||
2.1" | 1.8" | 0.02" | Clear | 0000000 | ||||||
2.6" | 2.2" | 0.02" | Clear | 0000000 | ||||||
3.1" | 2.7" | 0.02" | Clear | 0000000 | ||||||
4.2" | 3.5" | 0.02" | Clear | 0000000 | ||||||
5.2" | 4.4" | 0.02" | Clear | 0000000 | ||||||
6.2" | 5.4" | 0.02" | Clear | 0000000 |
Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away. Made of fluoropolymer, it resists chemicals and withstands temperatures up to 400° F.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
0.03"-1" ID Before Shrinking of FEP (17 sizes) | 17 | 2" | 1.3:1 | 420° | Clear | 00000000 | 00000 |
0.03"-1" ID Before Shrinking of FEP (17 sizes) | 17 | 3" | 1.3:1 | 420° | Clear | 00000000 | 00000 |