Filter by
Fitting Connection
Gender
Length
Nut Material
Connects To
Shape
Maximum Pressure @ Temperature
System of Measurement
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
Maximum Temperature
Specifications Met
Maximum Vacuum @ Temperature
Sleeve Finish
For Tube Fabrication
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Nuts with Built-In Sleeve for Quick-Assembly
Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 250° F
- Tubing: Use with copper
Use these nuts with quick-assembly compression fittings to create a strong seal on copper tubing. They have a built-in sleeve (ferrule), so the sleeve is positioned correctly for installation. Thread the nut onto the fitting, then insert the tubing and tighten the nut. They are brass for good corrosion resistance.
| For Tube OD | Nut Material | Sleeve Material | Max. Pressure | Each | |
| 1/2" | Brass | Brass | 1,100 psi @ 72° F | 000000000 | 00000 |
Sleeves for 37° Flared Fittings for Steel Tubing
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temp. Range: -60° to 400° F
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
For Tube OD | ||||
|---|---|---|---|---|
| Inch | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | ||||
| 1 1/4" | Zinc-Plated Steel | 2,000 psi @ 72° F | 00000000 | 00000 |