Clear All
For Tube OD For Tube OD |
|---|
|
|
|
For Tube Material For Tube Material |
|---|
|
Material Material |
|---|
|
For Use With For Use With |
|---|
Connection Type Connection Type |
|---|
 | Tube |
Length Length |
|---|
|
|
|
Sleeve Material Sleeve Material |
|---|
|
Specifications Met Specifications Met | Show |
|---|
Specifications Met Specifications Met | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
|
For Wire Rope Diameter For Wire Rope Diameter |
|---|
|
|
|
For Wire Rope Construction For Wire Rope Construction |
|---|
 |  |
| 7 × 7 Strand Core | 7 × 19 Strand Core |
 |  |
| 7 × 19 IWRC | 6 × 19 IWRC |
 |  |
| 3 × 7 IWRC | 7 × 7 IWRC |
For Wire Rope Material For Wire Rope Material |
|---|
|
Attachment Type Attachment Type |
|---|
 | Loop |
Application Application |
|---|
|
Capacity Capacity |
|---|
|
Sleeve Length Sleeve Length |
|---|
|
|
|
Compatible With Compatible With |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Finish Finish |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings
- For Use With: Air, Deionized Water, Pharmaceuticals, Water
- Temperature Range: See Gaskets
- Tubing: Use with 316/316L stainless steel that meets ASTM A269 or ASTM A270
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth. Use them in pharmaceutical and bioprocessing applications. Also known as tri-clamp fittings, they connect with a clamp, a gasket, and another quick-clamp fitting for a fast and easy way to access your line. Fittings are 316 stainless steel for excellent corrosion resistance.
The pressure rating of the fitting will depend on the clamp you choose.
The temperature rating of the fitting will vary depending on the gasket material you choose.
Note: To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
For technical drawings and 3-D models, click on a part number.
Straight Reducers, Butt-Weld Tube
Fittings with butt-weld end are also known as ferrules; they weld to tubing for a permanent connection.
| For Tube OD (A) | For Tube OD (B) | Wall Thick. | Material | Max. Pressure | Specifications Met | Each | |
| 3/4" | 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 0000000 |
| 1" | 3/4" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 000000 |
| 1 1/2" | 1" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 000000 |
| 2" | 1 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 000000 |
90° Elbow Connectors, Butt Weld Tube
Fittings with butt-weld end are also known as ferrules; they weld to tubing for a permanent connection.
| For Tube OD | Wall Thick. | Material | Max. Pressure | Specifications Met | Each | |
| 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 000000 |
| 3/4" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 1" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 1 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
Tee Connectors, Butt Weld Tube
Fittings with butt-weld end are also known as ferrules; they weld to tubing for a permanent connection.
| For Tube OD | Wall Thick. | Material | Max. Pressure | Specifications Met | Each | |
| 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 000000 |
| 3/4" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 1" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 1 1/2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
| 2" | 0.065" | 316/316L Stainless Steel | 700 psi @ 72° F | ASME BPE | 0000000 | 00000 |
Gaskets
Buna-N gaskets are oil resistant. EPDM gaskets resist water and steam and work well in humid environments. Silicone gaskets withstand high temperatures. Fluoroelastomer gaskets stand up to fuel, oil, and acid condensates. PTFE gaskets withstand harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Buna-N Rubber | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/2" | 0.380" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 2" | 1.900" | 2.520" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
EPDM Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
Front and Back Sleeves for Extreme-Pressure
Yor-Lok Fittings for Stainless Steel Tubing
Front
Back
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Natural Gas, Water
- Temperature Range: -420° to 1,000° F
- Tubing: Use with seamless 316/316L stainless steel
- Specifications Met: ASME B31.3
Use these sleeves with extreme-pressure yor-lok nuts and fittings to create an extra-strong seal on stainless steel tubing. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
Front and Back Sleeves for
Yor-Lok Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -40° to 400° F
- Tubing: Use with seamless copper
- Specifications Met: ASME B31.3
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Use these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on copper tubing. Sleeves are brass for good corrosion resistance. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Sleeve Material | Front Sleeve Lg. | Back Sleeve Lg. | Max. Pressure | Each | |
| 1/16" | Brass | 3/32" | 1/16" | 5,400 psi @ 72° F | 00000000 | 00000 |
| 1/8" | Brass | 3/16" | 3/32" | 2,900 psi @ 72° F | 00000000 | 0000 |
| 3/16" | Brass | 3/16" | 3/32" | 2,300 psi @ 72° F | 00000000 | 0000 |
| 1/4" | Brass | 3/16" | 3/32" | 1,600 psi @ 72° F | 00000000 | 0000 |
| 5/16" | Brass | 3/16" | 3/32" | 1,300 psi @ 72° F | 00000000 | 0000 |
| 3/8" | Brass | 3/16" | 3/32" | 1,000 psi @ 72° F | 00000000 | 0000 |
| 1/2" | Brass | 19/64" | 5/32" | 800 psi @ 72° F | 00000000 | 0000 |
| 5/8" | Brass | 19/64" | 5/32" | 900 psi @ 72° F | 00000000 | 0000 |
| 3/4" | Brass | 19/64" | 5/32" | 700 psi @ 72° F | 00000000 | 0000 |
| 1" | Brass | 3/8" | 13/16" | 800 psi @ 72° F | 00000000 | 00000 |
| 6mm | Brass | 5mm | 3mm | 2,030 psi @ 72° F | 00000000 | 0000 |
| 8mm | Brass | 5mm | 3mm | 1,450 psi @ 72° F | 00000000 | 0000 |
| 10mm | Brass | 5mm | 3mm | 1,160 psi @ 72° F | 00000000 | 0000 |
| 12mm | Brass | 7mm | 4mm | 870 psi @ 72° F | 00000000 | 0000 |
Front and Back Sleeves for
Yor-Lok Fittings for Steel Tubing
- For Use With: Air, Mineral Oil, Fuel Oil, Gasoline, Diesel Fuel, Cutting Oil, Hydraulic Fluid
- Temperature Range: -20° to 800° F
- Tubing: Use with seamless steel
- Specifications Met: ASME B31.3
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Use these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on steel tubing. They are also known as ferrules.
Zinc-plated steel sleeves have fair corrosion resistance. 316 stainless steel sleeves have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Front Sleeve Material | Back Sleeve Material | Max. Pressure | Each | |
| 1/8" | 0.035" | Zinc-Plated Steel | Zinc-Plated Steel | 6,800 psi @ 72° F | 00000000 | 00000 |
| 3/16" | 0.035" | Zinc-Plated Steel | Zinc-Plated Steel | 6,700 psi @ 72° F | 00000000 | 0000 |
| 1/4" | 0.035" | Zinc-Plated Steel | 316 Stainless Steel | 4,850 psi @ 72° F | 00000000 | 0000 |
| 5/16" | 0.035" | Zinc-Plated Steel | 316 Stainless Steel | 3,800 psi @ 72° F | 00000000 | 0000 |
| 3/8" | 0.035" | Zinc-Plated Steel | 316 Stainless Steel | 3,100 psi @ 72° F | 00000000 | 0000 |
| 1/2" | 0.035" | Zinc-Plated Steel | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 00000 |
| 5/8" | 0.035" | Zinc-Plated Steel | 316 Stainless Steel | 1,800 psi @ 72° F | 00000000 | 00000 |
| 3/4" | 0.049" | Zinc-Plated Steel | 316 Stainless Steel | 2,150 psi @ 72° F | 00000000 | 00000 |
| 1" | 0.065" | Zinc-Plated Steel | 316 Stainless Steel | 2,100 psi @ 72° F | 00000000 | 00000 |
| 2mm | 0.3mm | Zinc-Plated Steel | 316 Stainless Steel | 3,000 psi @ 72° F | 00000000 | 0000 |
| 3mm | 0.8mm | Zinc-Plated Steel | 316 Stainless Steel | 10,000 psi @ 72° F | 00000000 | 0000 |
| 4mm | 0.8mm | Zinc-Plated Steel | 316 Stainless Steel | 7,200 psi @ 72° F | 00000000 | 0000 |
| 6mm | 0.8mm | Zinc-Plated Steel | 316 Stainless Steel | 4,400 psi @ 72° F | 00000000 | 0000 |
| 8mm | 1mm | Zinc-Plated Steel | 316 Stainless Steel | 4,200 psi @ 72° F | 00000000 | 0000 |
| 10mm | 1mm | Zinc-Plated Steel | 316 Stainless Steel | 3,300 psi @ 72° F | 00000000 | 0000 |
| 12mm | 1mm | Zinc-Plated Steel | 316 Stainless Steel | 2,700 psi @ 72° F | 00000000 | 0000 |
| 15mm | 1.5mm | Zinc-Plated Steel | 316 Stainless Steel | 3,300 psi @ 72° F | 00000000 | 0000 |
| 16mm | 1.5mm | Zinc-Plated Steel | 316 Stainless Steel | 3,000 psi @ 72° F | 00000000 | 0000 |
| 18mm | 1.5mm | Zinc-Plated Steel | 316 Stainless Steel | 2,700 psi @ 72° F | 00000000 | 0000 |
| 20mm | 1.8mm | Zinc-Plated Steel | 316 Stainless Steel | 2,900 psi @ 72° F | 00000000 | 0000 |
| 22mm | 2mm | Zinc-Plated Steel | 316 Stainless Steel | 3,000 psi @ 72° F | 00000000 | 0000 |
Front and Back Sleeves for Ultra-Corrosion-Resistant
Yor-Lok Fittings for Nickel Alloy Tubing
- For Use With: Acetic Acid, Air, Bleach, Cutting Oil, Diesel Fuel, Formic Acid, Fuel Oil, Gasoline, Hydraulic Fluid, Iron Chlorides, Mineral Oil, Salt Water, Steam, Water
- Temperature Range: 0° to 1,000° F
- Tubing: Use with seamless soft C276 nickel
- Specifications Met: ASME B31.3
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Use these C276 nickel Hastelloy sleeves with Yor-Lok nuts and fittings to create a strong, leak-resistant seal. With the best corrosion resistance of any Yor-Lok sleeves we offer, they stand up to aggressive chemicals and resist pitting and cracking from stress. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
Wire Rope Compression Sleeves—For Lifting
Install with a compression tool to create a strong, permanent loop. Compression sleeves are also known as ferrules, crimps, swaging, and splicing sleeves. They're compatible with Nicopress compression tools.
Tin-plated copper sleeves have mild corrosion resistance.
Black-oxide copper sleeves have a dark surface color and mild corrosion resistance.
Zinc-plated copper sleeves are more corrosion resistant than tin-plated or black-oxide copper.
18-8 stainless steel sleeves have excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Sleeves | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Compression Tools | ||||||||||
| Dia. | Construction | Sleeve Lg. | Required Number of Compressions | Capacity | Specifications Met | Pkg. Qty. | Pkg. | Compression Tool Type | Each | ||
Copper | |||||||||||
For Steel Rope | |||||||||||
| 1/32" | 7 × 7 Strand Core | 1/4" | 2 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 25 | 000000 | 00000 | Multidiameter | 000000 | 000000 |
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 000000 | 00000 | Multidiameter | 000000 | 000000 |
| 7/32" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7/8" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 000000 | 00000 | Single Diameter | 00000000 | 000000 |
| 1/4" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 5/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 5 | 0000000 | 00000 | Single Diameter | 00000000 | 000000 |
| 3/8" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/4" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Hydraulic | 00000000 | 00000000 |
| 7/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 3/4" | 2 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic | 000000 | 00000000 |
| 9/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
| 5/8" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2 3/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
Tin-Plated Copper | |||||||||||
For Steel and Stainless Steel Rope | |||||||||||
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 25 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 7/32" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7/8" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Single Diameter | 00000000 | 000000 |
| 1/4" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 5 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 5/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Single Diameter | 00000000 | 000000 |
| 3/8" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 3/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Hydraulic | 00000000 | 00000000 |
For Stainless Steel Rope | |||||||||||
| 7/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 3/4" | 2 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic | 000000 | 00000000 |
| 9/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
| 5/8" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2 3/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
Black-Oxide Copper | |||||||||||
For Steel Rope | |||||||||||
| 1/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9 | 50 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 1/4" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 1/8" | 2 | 100% of the Rope's Capacity | ASME B30.9 | 5 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 5/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 1/16" | 4 | 100% of the Rope's Capacity | ASME B30.9 | 2 | 0000000 | 00000 | Single Diameter | 00000000 | 000000 |
| 3/8" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 1/4" | 4 | 100% of the Rope's Capacity | ASME B30.9 | 2 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
For Steel and Stainless Steel Rope | |||||||||||
| 1/8" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 9/16" | 3 | 100% of the Rope's Capacity | ASME B30.9 | 10 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 5/32" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 5/8" | 4 | 100% of the Rope's Capacity | ASME B30.9 | 10 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 15/16" | 4 | 100% of the Rope's Capacity | ASME B30.9 | 5 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 7/32" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 7/8" | 4 | 100% of the Rope's Capacity | ASME B30.9 | 5 | 0000000 | 0000 | Single Diameter | 00000000 | 000000 |
Zinc-Plated Copper | |||||||||||
For Steel Rope | |||||||||||
| 1/32" | 7 × 7 Strand Core | 1/4" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Single Diameter | 0000000 | 00000 |
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 50 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 25 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 0000 | Multidiameter | 000000 | 000000 |
| 3/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 7/32" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7/8" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Single Diameter | 00000000 | 000000 |
| 1/4" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 5 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 5/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/16" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Single Diameter | 00000000 | 000000 |
| 3/8" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/4" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Hydraulic | 00000000 | 00000000 |
| 7/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 1 3/4" | 2 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic | 000000 | 00000000 |
| 1/2" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 7/8" | 6 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 000000 | 00000 | Hydraulic | 00000000 | 00000000 |
| 9/16" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
| 5/8" | 3 × 7 IWRC 6 × 19 IWRC 7 × 7 IWRC 7 × 19 IWRC | 2 3/8" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 0000000 | 00000 | Hydraulic Bench-Top | 000000 | 00000000 |
18-8 Stainless Steel | |||||||||||
For Steel and Stainless Steel Rope | |||||||||||
| 1/32" | 7 × 7 Strand Core | 1/4" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Multidiameter | 000000 | 000000 |
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 0000 | Single Diameter | 0000000 | 000000 |
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 10 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 5 | 0000000 | 00000 | Single Diameter | 0000000 | 000000 |
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 23/32" | 3 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Single Diameter | 00000000 | 000000 |
| 3/16" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1" | 4 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 2 | 0000000 | 0000 | Single Diameter | 00000000 | 000000 |
| 1/4" | 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 1 | 100% of the Rope's Capacity | ASME B30.9, MS51844 | 1 | 000000 | 0000 | Hydraulic Bench-Top | 00000000 | 00000000 |
Hole Saws for Fiberglass and Plastic Sheets
