Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.

Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.

Mount these lightweight half rounds on flat surfaces to reinforce frames and structures. Carbon fiber is often used in place of aluminum because it weighs less but is almost as rigid.

Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight.

A layer of foam is sandwiched between two pieces of carbon fiber to make a featherweight material that's even lighter than standard carbon fiber.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Garolite CE is often fabricated into parts where high strength is not required.

Garolite CE is often fabricated into parts where high strength is not required.

Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9, they offer better arc resistance in dry environments.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

SG-200 fiberglass withstands temperatures up to 410° F—higher than any of our other fiberglass raw materials. It’s also stronger than FRP fiberglass and easy to machine.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Also known as fishpaper.

Unlike metal rods, these threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.

Even when exposed for as long as 2 minutes to temperatures up to 2600° F, these sheets won't ignite or melt.

Line toolboxes and drawers to cushion and protect small parts.

Cover wallboard, masonry, and studs with these durable, washable, and mildew-resistant panels.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

Wrap rectangular and round ductwork with this flexible insulation.

Also known as batts, these fiberglass sheets and strips are used to insulate walls, ceilings, and floors.

Protect and repair insulation with this cotton fiber and resin mesh.