About Stair Tread Covers and Nosing
More
Fiberglass Bar Grating
Layers of resin and fiberglass strands are molded for bar grating with excellent impact resistance that provides better traction than metal bar grating. It is corrosion resistant, lightweight, nonconductive, and nonmagnetic. Use it on trenches, walkways, catwalks, work platforms, ramps, and floors in washdown areas. Gratings are not recommended for use with vehicle traffic.
Cut grating with a circular saw with diamond-tipped blade. Seal cut ends with an epoxy sealant (sold separately). Use Fasteners for Fiberglass Bar Grating to secure.
Styles B and C must be installed so that bearing bars rest on supports.
For technical drawings and 3-D models, click on a part number.
Drainage Opening | Uniform Load | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Bearing Bar Ht. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Each | |
Grit | ||||||||||
3' | 4'10" | 1" | 1 1/2" | 1 1/2" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 0000000 |
3' | 4'10" | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
3' | 10' | 1" | 1 1/2" | 1 1/2" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
3' | 10' | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
3'11" | 4' | 1" | 1" | 4" | 500 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 3'10" | 1" | 1 1/2" | 1 1/2" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 3'10" | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 5'10" | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 5'10" | 2" | 2" | 2" | 1,040 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 8' | 1" | 1 1/2" | 1 1/2" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 8' | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 12' | 1 1/2" | 1 1/2" | 1 1/2" | 950 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 12' | 2" | 2" | 2" | 1,040 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4'11" | 3' | 1" | 1" | 4" | 500 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
8' | 4' | 1" | 1" | 4" | 500 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
10' | 3' | 1" | 1" | 4" | 500 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Bearing Bar | Drainage Opening | Uniform Load | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Ht. | Wd. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Each | |
Grit | |||||||||||
2' | 3' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 0000000 |
2' | 4' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
2' | 6' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
3' | 3' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
3' | 4' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
3' | 6' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
4' | 3' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
4' | 4' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
4' | 6' | 1 1/2" | 1/4" | 1 1/2" | 4" | 482 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 00000000 | 000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Bearing Bar | Uniform Load | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Lengths | Per Ft. | |
Grit | |||||||||||
2' | 1" | 19/32" | 1 1/2" | 6" | 1,583 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 | |
2' | 1 1/2" | 19/32" | 1 1/2" | 6" | 4,471 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000 | |
3' | 1" | 19/32" | 1 1/2" | 6" | 1,583 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000 | |
3' | 1 1/2" | 19/32" | 1 1/2" | 6" | 4,471 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 | |
4' | 1" | 19/32" | 1 1/2" | 6" | 1,583 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 | |
4' | 1 1/2" | 19/32" | 1 1/2" | 6" | 4,471 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Narrow-Opening Fiberglass Bar Grating
Narrow openings prevent items from falling through this grating and make it easier for carts to roll across. Layers of resin and fiberglass strands are molded for bar grating with excellent impact resistance that provides better traction than metal bar grating. It is corrosion resistant, lightweight, nonconductive, and nonmagnetic. Use it on trenches, walkways, catwalks, work platforms, ramps, and floors in washdown areas. Cross bars hold the bearing bars in place; bearing bars help distribute weight and must rest on supports.
Cut grating with a circular saw with diamond-tipped blade. Seal cut ends with an epoxy sealant (sold separately). Use Fasteners for Fiberglass Bar Grating to secure.
Grating with 1 1/2" wide bearing bars help comply with the Americans with Disabilities Act (ADA) when installed properly.
For technical drawings and 3-D models, click on a part number.
Bearing Bar | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd., ft. | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Mounting Hardware Included | For Use Outdoors | Specifications Met | Lengths, ft. | Per Ft. | |
Grit | ||||||||||
2 | 1" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 000000 | |
2 | 1 1/2" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 00000 | |
2 | 2" | 1" | 2" | 6" | No | Yes | __ | 00000000 | 00000 | |
3 | 1" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 000000 | |
3 | 1 1/2" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 000000 | |
3 | 2" | 1" | 2" | 6" | No | Yes | __ | 00000000 | 000000 | |
4 | 1" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 000000 | |
4 | 1 1/2" | 1 1/2" | 2" | 6" | No | Yes | ADA Compliant | 00000000 | 000000 | |
4 | 2" | 1" | 2" | 6" | No | Yes | __ | 00000000 | 000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Food Industry Fiberglass Bar Grating
Formulated to protect against odors, stains, and degradation, this grating is often used in food-processing areas. Layers of resin and fiberglass strands are molded for bar grating with excellent impact resistance that provides better traction than metal bar grating. It is corrosion resistant, lightweight, nonconductive, and nonmagnetic. Use it on trenches, walkways, catwalks, work platforms, ramps, and floors in washdown areas.
Cut grating with a circular saw with diamond-tipped blade. Seal cut ends with an epoxy sealant (sold separately). Use Fasteners for Fiberglass Bar Grating to secure.
For technical drawings and 3-D models, click on a part number.
Drainage Opening | Uniform Load | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Bearing Bar Ht. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Each | |
Grit | ||||||||||
10' | 3' | 1" | 3/4" | 3 5/8" | 500 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000000 |
3' | 4'10" | 1" | 1 1/4" | 1 1/4" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
3' | 4'10" | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 000000 |
3' | 10' | 1" | 1 1/4" | 1 1/4" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 00000000 |
3' | 10' | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 00000000 |
3'11" | 4' | 1" | 3/4" | 3 5/8" | 500 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 3'10" | 1" | 1 1/4" | 1 1/4" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 3'10" | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 000000 |
4' | 5'10" | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 5'10" | 2" | 1 11/16" | 1 11/16" | 1,000 lbs./sq. ft. @ 2 ft. | 0.2" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 8' | 1" | 1 1/4" | 1 1/4" | 300 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 8' | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 12' | 1 1/2" | 1 1/4" | 1 1/4" | 1,000 lbs./sq. ft. @ 2 ft. | 0.42" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4' | 12' | 2" | 1 11/16" | 1 11/16" | 1,000 lbs./sq. ft. @ 2 ft. | 0.2" @ 2 ft. | No | Yes | 0000000 | 00000000 |
4'11" | 3' | 1" | 3/4" | 3 5/8" | 500 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 000000 |
8' | 4' | 1" | 3/4" | 3 5/8" | 500 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | 0000000 | 00000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Fasteners for Fiberglass Bar Grating
Secure grating to your support structure.
Style A require a hole in the support structure and secure to the structure with a hex head cap screw (not included).
Style B bridge two bearing bars. Fasteners require a hole in the support structure.
Styles C-F hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
For technical drawings and 3-D models, click on a part number.
For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|
Style | For Bearing Bar Ht. | Wd. | Lg. | For Support Structure Thick. | For Screw Dia. | Mounting Hardware Included | Each | |
316 Stainless Steel | ||||||||
A | Any | 1 1/2" | 1 1/2" | Any | 1/4" | No | 0000000 | 00000 |
For Bearing Bar | For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Ht. | Center-to-Center Wd. | Wd. | Lg. | For Support Structure Thick. | Overall Ht. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
B | 1" | __ | 1" | 4" | 1" | 1" | Yes | 0000000 | 000000 |
B | 1" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
B | 1", 1 1/2" | 1 1/2" | __ | __ | 1" | 1" | Yes | 0000000 | 00000 |
B | 1 1/2" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
B | 2" | __ | 2" | 2" | 1" | 1" | Yes | 0000000 | 00000 |
For Bearing Bar | For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Ht. | Center-to-Center Wd. | End-to-End Wd. | Wd. | Lg. | For Support Structure Thick. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
C | 3/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 000000 |
C | 1 1/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 00000 |
C | 1 3/4" | __ | __ | 2" | 2" | 1/4"-3/4" | Yes | 0000000 | 00000 |
D | 3/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
D | 1 1/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
E | 3/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
E | 1 1/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 1 1/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 1 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
Fiberglass Stair Treads
These lightweight fiberglass treads are corrosion resistant, nonconductive, and nonmagnetic. The surface is grit coated for traction. Cut treads with a circular saw using a diamond-grit blade, and seal the cut end with an epoxy sealant (sold separately). Use Fasteners for Fiberglass Bar Grating to secure.
Drainage Opening | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Thick. | Bearing Bar Ht. | Wd. | Lg. | Load Capacity, lbs. | Mounting Hardware Included | For Use Outdoors | Each | |
Grit | ||||||||||
24" | 10 1/2" | 1/8" | 1" | 0.9" | 5 1/2" | 500 | No | Yes | 0000000 | 0000000 |
24" | 10 1/2" | 1/8" | 1 1/2" | 0.9" | 5 1/2" | 500 | No | Yes | 0000000 | 000000 |
30" | 10 1/2" | 1/8" | 1" | 0.9" | 5 1/2" | 250 | No | Yes | 0000000 | 000000 |
30" | 10 1/2" | 1/8" | 1 1/2" | 0.9" | 5 1/2" | 500 | No | Yes | 0000000 | 000000 |
36" | 10 1/2" | 1/8" | 1" | 0.9" | 5 1/2" | 250 | No | Yes | 0000000 | 000000 |
36" | 10 1/2" | 1/8" | 1 1/2" | 0.9" | 5 1/2" | 500 | No | Yes | 0000000 | 000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Stair Tread Nosing
Screw nosing into place to protect the front portion of the stair and provide a slip-resistant surface. Construction adhesive (sold separately) is for use between nosing and the front edge of the stair to prevent cracks.
Style C can be installed on wood or concrete stairs. Drill and screw in place using #10 stainless steel truss-head screws. Nosing has a grit coating for excellent traction in high-traffic areas.
For technical drawings and 3-D models, click on a part number.
Stair Tread Covers
Protect stairs from wear or provide a new stair surface on worn stairs. Covers fit square-nose concrete and wood stairs.
Style H are fiberglass with a grit top for superior corrosion resistance in harsh environments and excellent traction in high-traffic areas. Covers have glow-in-the-dark nosing for high visibility. To install, use construction adhesive (sold separately), then drill and screw in place; use stainless steel truss-head screws.
For technical drawings and 3-D models, click on a part number.
Solid Grating
This solid fiberglass grating is good for wheel traffic and areas where you don't want small items and debris to fall through. It has an abrasive grit surface that provides good traction. It is nonconductive and nonmagnetic.
Cut grating with a circular saw with diamond-tipped blade. Seal cut ends with an epoxy sealant (sold separately). Installation requires drilling through the grating as well as the structural support; fasteners are included.
Also Available: Custom sizes; please ask for 4638T999 and specify width, length, and height.
For technical drawings and 3-D models, click on a part number.
Uniform Load | ||||||||
---|---|---|---|---|---|---|---|---|
Wd., ft. | Lg., ft. | Ht. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Each | |
Fiberglass | ||||||||
Grit | ||||||||
3 | 5 | 1 1/8" | 300 lbs./sq. ft. @ 2 ft. | 0.185" @ 2 ft. | Yes | Yes | 0000000 | 0000000 |
3 | 5 | 1 5/8" | 1,000 lbs./sq. ft. @ 2 ft. | 0.21" @ 2 ft. | Yes | Yes | 0000000 | 000000 |
3 | 10 | 1 1/8" | 300 lbs./sq. ft. @ 2 ft. | 0.185" @ 2 ft. | Yes | Yes | 0000000 | 00000000 |
3 | 10 | 1 5/8" | 1,000 lbs./sq. ft. @ 2 ft. | 0.21" @ 2 ft. | Yes | Yes | 0000000 | 00000000 |
4 | 6 | 1 5/8" | 1,000 lbs./sq. ft. @ 2 ft. | 0.21" @ 2 ft. | Yes | Yes | 0000000 | 00000000 |
4 | 6 | 2 1/8" | 1,000 lbs./sq. ft. @ 2 ft. | 0.1" @ 2 ft. | Yes | Yes | 0000000 | 00000000 |
4 | 8 | 1 1/8" | 300 lbs./sq. ft. @ 2 ft. | 0.185" @ 2 ft. | Yes | Yes | 0000000 | 00000000 |
Epoxy Sealant (12 1/2 oz. Aerosol Can) | 0000000 | Each | 000000 |
Traction Floor Plates
Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.
Plates with grit have an abrasive-coated surface for increased traction and durability.
Fiberglass and UHMW plates are nonconductive, corrosion resistant, and nonmagnetic. Cut fiberglass to size using a circular saw with diamond-tipped blade. Seal cut ends with an epoxy sealant (sold separately).
ADA-Compliant Warning Tiles
With a raised disc surface that can be felt with feet and canes, these tiles alert individuals with visual impairments to an upcoming intersection or an edge of a walkway. Often used on sidewalks, ramps, entryways, and pedestrian crossings, all of these tiles are slip resistant and won't corrode or fade if exposed to harsh outdoor conditions. They comply with the Americans with Disabilities Act (ADA) for accessible design and the Public Right-of-Way Accessibility Guidelines (PROWAG) for detectable warnings on public walking surfaces.
Fiberglass-reinforced polyester tiles are more durable than urethane tiles. Hard impacts, however, may cause them to crack. Made to withstand heavy duty highway traffic loads, these tiles meet the American Association of State Highway and Transportation Officials (AASHTO-H20) standards.
Install adhesive tiles on top of existing dry concrete with included adhesive and concrete anchors. They’re quicker and easier to install than set-in-concrete tiles.
Set-in-concrete tiles have a flange and anchors that install directly into wet concrete for a more secure hold than adhesive tiles. These tiles sit flush with the concrete to create an even walking surface that eliminates tripping hazards. To replace damaged tiles, pry them off their anchors. Then, use the included bolts to secure a new tile to those same anchors—there’s no need to drill the surrounding concrete.
For technical drawings and 3-D models, click on a part number.
Width | Length | Thickness | Edge Profile | Edge Height | Mounting Hardware Included | For Use Outdoors | Specifications Met | Each | |
Yellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
Fiberglass-Reinforced Polyester Plastic | |||||||||
Adhesive Tiles for Straight Curb | |||||||||
24" | 36" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 0000000 |
24" | 48" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
36" | 48" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
36" | 60" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
Set-in-Concrete Tiles for Straight Curb | |||||||||
24" | 24" | 47/64" | Raised | 3/8" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
24" | 48" | 47/64" | Raised | 3/8" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
Red Brown | |||||||||
Fiberglass-Reinforced Polyester Plastic | |||||||||
Adhesive Tiles for Straight Curb | |||||||||
24" | 36" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
24" | 48" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
36" | 48" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
36" | 60" | 13/64" | Beveled | 1/16" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
Set-in-Concrete Tiles for Straight Curb | |||||||||
24" | 24" | 47/64" | Raised | 3/8" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |
24" | 48" | 47/64" | Raised | 3/8" | Yes | Yes | AASHTO-H20, ADA Compliant, PROWAG Compliant | 0000000 | 000000 |