Search Results
Thread Size Thread Size |
|---|
Application Application |
|---|
|
File Sizes Included File Sizes Included |
|---|
|
Thread Repairing Tap, Die, and File Sets
Repair screw threads in a wide range of sizes. The dies are hex shaped for use with conventional wrenches. The taps have a square shank that's compatible with tap wrenches and tap holders for drill presses and drilling machines. With a plug chamfer, all taps have 3-5 chamfered threads and are suitable for thread repair in both through holes and closed-end holes.
| Number of Pieces | Tap Sizes Included | Die Sizes Included | File Sizes Included | Container Type | Each | |
Carbon Steel | ||||||
|---|---|---|---|---|---|---|
Right-Hand Thread | ||||||
| 53 | 1/4”-20, 1/4”-28, 5/16”-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16”-12, 9/16"-18, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 3/4"-20, M6 × 1.00 mm, M6 × 1.25 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M8 × 1.50 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, and M20 × 1.50 mm | For 11 to 24 threads per inch, For 0.8 to 3 mm thread pitches | Plastic Case | 00000000 | 0000000 |
Thread Repairing Die and File Sets for Tight Spots
Renew external threads in a wide range of sizes. The dies in these sets have a narrower width than standard dies, making them a good choice for thread repair in tight spots. They're hex shaped for use with conventional wrenches.
| Number of Pieces | Die Sizes Included | File Sizes Included | Container Type | Each | |
Carbon Steel | |||||
|---|---|---|---|---|---|
Right-Hand Thread | |||||
| 13 | M6 × 1.00 mm (11 mm Wd.), M6 × 1.25 mm (11 mm Wd.), M8 × 1.00 mm (14 mm Wd.), M8 × 1.25 mm (14 mm Wd.), M8 × 1.50 mm (14 mm Wd.), M10 × 1.00 mm (18 mm Wd.), M10 × 1.25 mm (18 mm Wd.), M10 × 1.50 mm (18 mm Wd.), M12 × 1.25 mm (19 mm Wd.), M12 × 1.50 mm (19 mm Wd.), M14 × 1.25 mm (21 mm Wd.), and M14 × 1.50 mm (21 mm Wd.) | For 0.8 to 3 mm thread pitches | Plastic Case | 0000000 | 000000 |
| 15 | 1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), and 5/8"-18 (15/16" Wd.) | For 11 to 24 threads per inch | Plastic Case | 0000000 | 00000 |
| 18 | 1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), 5/8"-18 (15/16" Wd.), 3/4"-10 (1 1/16" Wd.), and 3/4"-16 (1 1/16" Wd.) | For 9 to 32 threads per inch, For 11 to 24 threads per inch | Plastic Case | 0000000 | 00000 |
V-Belts
