About Finishing
More
Smoothing and Polishing Stones
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface.We recommend using a water-soluble or oil-based lubricant for stones that are not oil filled.
For technical drawings and 3-D models, click on a part number.
| Grit (For Finish) | Lg. | Wd. | Color | Lubrication | Each | |
Ceramic Alumina—For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| 1400 (Polished) | 5" | 1/4" | White | Recommended | 0000000 | 000000 |
Smoothing and Polishing Stone Sets
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface. We recommend using a water-soluble or oil-based lubricant.
For technical drawings and 3-D models, click on a part number.
| No. of Pieces | Lg. | Includes | Stone Style | Grit (For Finish) | Color | Container Type | Each | |
Ceramic Alumina—For Use On Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4 | 5" | One Square Stone—1/4" Wd. × 1/4" Thick. One Triangular Stone—1/4" Wd. One Round Stone—1/4" Dia. One Contoured Stone—15/32" Wd. × 1/8"-1/4" Thick. | Straight | 1400 (Polished) | White | Sheath | 0000000 | 000000 |
Two-Grit Sharpening Stones
A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.
Ceramic alumina is extremely hard and wear resistant.
For technical drawings and 3-D models, click on a part number.
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Each | |
Ceramic Alumina × Ceramic Alumina | ||||||
| 5" | 1" | 1/4" | 600 (Polished) × 1800 (Polished) | Not Required × Not Required | 0000000 | 000000 |
Single-Grit Sharpening Stones
Quickly sharpen straight-blade tools.
Ceramic alumina is extremely hard and wear resistant.
For technical drawings and 3-D models, click on a part number.
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lubrication | Choose a Grit (For Finish) | Each | |
Rectangular | ||||||
Ceramic Alumina | ||||||
| 8" | 2" | 1/2" | Not Required | 000000 | 0000000 | |