Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

Stop leaks in metal tanks and equipment without draining the contents.

Seal leaks around fasteners with a protruding head.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

Made of indium, this foil is more thermally conductive than thermal interface materials (TIMs) made of plastic.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Fill cracks with these coatings to stop leaks and deaden sound.

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Tape hides seams and smooths out corners. Joint compound is required for bonding and finishing.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Make removing form-board stakes easier.

Use these brushes to apply paste for wall coverings.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

Cut perfect circles up to 16" in diameter to create openings for pipes, conduit, or lighting fixtures.

Use these mashers to mix drywall compound in large containers.

Smooth joint compound on both sides of an interior corner with these trowels.

Remove hardened flecks of mortar, dirt, and other debris.

Smooth and spread grout between tiles.

Fix damaged wood or build up and replace missing wood.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Make temporary waterproof seals that peel off when no longer needed.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Make tough, flexible, oil-resistant seals.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Prepare joints and surfaces to ensure proper sealant adhesion.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

Apply this thread sealant stick without a mess.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

Apply this thread sealant stick without a mess.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.