Color Color | Show |
---|
![]() | Silver |
Color Color | Hide |
---|
For Use On For Use On |
---|
|
Container Type Container Type |
---|
![]() | ![]() |
Tube | Jar |
![]() | ![]() |
Pen | Single-Use Packet |
Insulation Type Insulation Type |
---|
![]() | Sheet/Strip |
Type Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Consistency Consistency |
---|
|
Flexibility Flexibility |
---|
![]() | Flexible |
Clarity Clarity |
---|
|
Electrical Properties Electrical Properties |
---|
|
More
More
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||||
11 oz. | Tube | 25 | 7 days | Paste | 1:1 | 50 sq. in. @ 1/4" | 1/4" | Yes | -55° to 180° | Silver | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Steel, Cast Iron, Titanium | 0000000 | 000000 |
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.
Surface filler in a pen dispenses as a thin, ready-to-use liquid that fills in pitting and small gaps. It’s often used on circuit boards to fix components or to prototype new systems.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Surface Resistivity, ohms/sq. | Consistency | Mix Ratio | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Surface Fillers | ||||||||||||||
3888 | 0.1 | One-Time-Use Packet | 90 min. | 24 hrs. | 1.44 | 0.001 | __ | Paste | 100:6 | -40° to 170° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic | 0000000 | 000000 |
Surface Fillers | ||||||||||||||
__ | 0.1 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 00000 |
__ | 0.2 | Pen | 3 min. | 60 min. | Not Rated | __ | 0.050 | Thin Liquid | __ | -65° to 300° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 00000 |
__ | 0.4 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | Paste | 100:6 | -75° to 250° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
__ | 0.5 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | Paste | 1:1 | Not Rated to 300° | Silver | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
__ | 1 | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | Paste | 1:1 | Not Rated to 300° | Silver | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Temp. Range, °F | Consistency | Viscosity, cP | Shear Strength, lbs./sq. in. | Color | Each | |
High Locking Strength | ||||||||||||
Loctite® Retaining Compounds | ||||||||||||
660 | 0.2 | Tube | 0.02" | 20 min. | 24 hrs. | -65° to 300° | Paste | 250,000 | 2,490 | Silver | 0000000 | 000000 |
660 | 1.69 | Tube | 0.02" | 20 min. | 24 hrs. | -65° to 300° | Paste | 250,000 | 2,490 | Silver | 0000000 | 00000 |
Typically used as duct wrap, these flexible sheets consist of polyethylene bubbles covered with aluminum polyester foil that prevent 96% of heat from radiating into or away from duct. Use on rectangular and round ductwork.
Wd. | R Value | Flexibility | Each | |
25 ft. Lg. | ||||
---|---|---|---|---|
5/16" Thick. | ||||
24" | 4.2 | Flexible | 0000000 | 000000 |
36" | 4.2 | Flexible | 0000000 | 00000 |
48" | 4.2 | Flexible | 0000000 | 00000 |
50 ft. Lg. | ||||
5/16" Thick. | ||||
24" | 4.2 | Flexible | 0000000 | 00000 |
36" | 4.2 | Flexible | 0000000 | 00000 |
48" | 4.2 | Flexible | 0000000 | 000000 |
75 ft. Lg. | ||||
5/16" Thick. | ||||
24" | 4.2 | Flexible | 0000000 | 00000 |
36" | 4.2 | Flexible | 0000000 | 000000 |
48" | 4.2 | Flexible | 0000000 | 000000 |
100 ft. Lg. | ||||
5/16" Thick. | ||||
24" | 4.2 | Flexible | 0000000 | 000000 |
36" | 4.2 | Flexible | 0000000 | 000000 |
48" | 4.2 | Flexible | 0000000 | 000000 |
Spacers installed between the duct and air bubble insulation sheet increase the R-value to 6. One spacer roll covers approximately 10 ft. of 8" duct.
Thick. | Wd. | Lg., ft. | Each | |
5/16" | 2" | 25 | 0000000 | 00000 |