For Joining For Joining |
---|
|
For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
Formulation Formulation |
---|
|
|
Type Type |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Clarity Clarity |
---|
|
Specifications Met Specifications Met |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Material Material |
---|
|
Hardness Rating Hardness Rating |
---|
|
Application Application |
---|
|
Tensile Strength Tensile Strength |
---|
|
More
Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size | Type | Consistency | Mixing Required | Mix Ratio | Approximate Coverage @ Thick. | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/4" | 8 | Pail | Powder | Yes | 2:1 | 4 sq. ft. @ 1/8" | White | Sand | No | Drywall, Plaster | 0000000 | 000000 |
Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound. Patches are made of fiberglass-reinforced aluminum.
Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound. Assortments include two 4" × 4" patches and a 6" × 6" patch. Patches are made of fiberglass-reinforced aluminum.
Material | Reinforcement Material | Color | For Use Outdoors | For Use On | Includes | Each | |
Aluminum | Fiberglass | White | No | Drywall, Plaster | Two 4"×4" Patches, One 6"×6" Patch | 00000000 | 00000 |
Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size, pt. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/8" | 1 | Jar | Paste | 5 | 2 | 20 ft. @ 8 mil | 8 mil | 50° to 120° | White | Sand | Yes | Drywall, Plaster, Concrete, Wood | 000000 | 000000 |
Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, lbs. | Type | Consistency | Approximate Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
12 | Pail | Paste | 40 ft. @ 1/4" | -20° to 120° | White | Sand | No | Drywall | 0000000 | 00000 |
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Specifications Met | Choose a Color | Each | |
Silicone | ||||||||||||
9.8 | Cartridge | 5 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -40° to 350° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600 | 000000 | 00000 |
PR-1200 Primer for Dow Corning, Loctite®, 76435T21, and 76435T11 Sealants (16-oz. Bottle) | 0000000 | Each | 000000 |
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Butyl rubber has a sticky, gummy consistency.
Black | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Wd. | Thick. | Lg., ft. | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Number of Pieces | Each | |
08578 | 5/16" | 5/16" | 1 | Not Rated | Not Rated | -20° to 200° | Metal Plastic Asphalt Composites Glass Masonry Wood | 60 | 0000000 | 000000 |
Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. Caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | 1-11 | 12-Up | |
Acrylic | ||||||||||||||
10.1 | Cartridge | 10 min. | 14 days | Not Rated | -25% to 25% | Not Rated | Not Rated | -30° to 180° | ASTM C920 Type S Grade NS Class 25; Fed. Spec. TT-S-00230C Type II Class A | Metal, Asphalt, Glass, Masonry, Wood | 000000 | 00000 | 00000 | |
Hybrid Polymer | ||||||||||||||
5.5 | Tube | 3 days | 3 days | 600% | Not Rated | Not Rated | Not Rated | -20° to 180° | ASTM C920 | Metal, Plastic, Composites, Glass, Masonry, Wood | White | 0000000 | 0000 | 0000 |
10.1 | Cartridge | 3 days | 3 days | 600% | Not Rated | Not Rated | Not Rated | -20° to 180° | ASTM C920 | Metal, Plastic, Composites, Glass, Masonry, Wood | White | 0000000 | 0000 | 0000 |
Mix a small amount of water-based paint with this caulk to match the color of your surface. Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. This caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Includes | Each | |
Acrylic | ||||||||||||
9.4 | Cartridge | 24 hrs. | 3 days | 500% | -12.5% to 12.5% | 10 | Not Rated | 0° to 180° | Metal, Composites, Glass, Masonry, Wood | 10 ml Paint Syringe, Mixer, Two Caulk Cartridges | 0000000 | 000000 |
Replacement Cartridge | 0000000 | Each | 00000 |