An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Prepare joints and surfaces to ensure proper sealant adhesion.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

Accommodate joint movement with these adhesives that remain pliable when cured.

In especially damp or humid environments, these adhesives keep their hold.

Use these adhesives in applications that are highly sensitive to contaminants.

These adhesives withstand temperatures of 390° F or more.

Also known as super glue, these adhesives bond quickly.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Install vinyl and rubber treads on stairs with this adhesive.