Cell Type Cell Type |
---|
![]() | Closed |
For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
Insulation Type Insulation Type |
---|
![]() | Sheet/Strip |
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Flexibility Flexibility |
---|
![]() | Flexible |
Material Material |
---|
|
|
Heat Flow Rate Heat Flow Rate |
---|
|
Density Density |
---|
|
Performance Properties Performance Properties |
---|
|
Specifications Met Specifications Met |
---|
Minimum Facing Temperature Minimum Facing Temperature |
---|
|
Reinforcement Material Reinforcement Material |
---|
|
More
More
More
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Sheets/strips with foil facing reflect heat away from pipe. The foil facing is also known as FSK. Seal with reinforced HVAC tape (sold separately).
Sheets/strips with kraft paper facing have an all-service jacket (ASJ) made of kraft paper. Seal with reinforced insulation tape (sold separately).
Lightweight and super thin, these fiber-reinforced silica aerogel sheets and strips flex into tight spaces other insulation can't. Use on process piping and in power-generating applications. Insulation can be layered, laminated, or wrapped in foil.
Thick. | Wd. | Lg. | R Value | Reinforcement Material | Flexibility | Each | |
5/64" | 12" | 26" | 0.8 | Fiberglass Fiber | Flexible | 000000 | 000000 |
Able to withstand temperatures as low as -290° F, these super-thin, lightweight sheets are made of fiber-reinforced silica aerogel that can flex into tight spaces other insulation can't. Use in process piping and power-generating applications. Insulation can be layered, laminated, or wrapped in foil.
Thick. | Wd. | Lg. | R Value | Reinforcement Material | Flexibility | Each | |
3/16" | 12" | 26" | 1.9 | Fiberglass Fiber | Flexible | 000000 | 000000 |
Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.
Shield against extreme heat with these flexible ceramic strips. They are often used to insulate hose, cables, and process piping.
Alumina oxide ceramic fiber has the lowest heat-flow rate of all the ceramic fiber materials.
Alkaline earth silicate ceramic fiber, also called AES, has a foil facing to reflect radiant heat.
Insulation with adhesive backing allows you to install without having to hold in place. Secure with band clamps or other parts of the assembly once in position. Apply while cool. Adhesive will start to wear off around 400° F, but this does not affect the insulation’s temperature rating.
Wd. | Lg., ft. | Temp. Range, °F | R Value | Backing Type | Flexibility | Each | |
1/32" Thick. | |||||||
---|---|---|---|---|---|---|---|
1" | 50 | -50° to 2300° | 0.02 | Plain | Flexible | 00000000 | 000000 |
2" | 50 | -50° to 2300° | 0.02 | Plain | Flexible | 00000000 | 00000 |
3" | 50 | -50° to 2300° | 0.02 | Plain | Flexible | 00000000 | 00000 |
1/16" Thick. | |||||||
1" | 50 | -50° to 2300° | 0.04 | Plain | Flexible | 00000000 | 00000 |
2" | 50 | -50° to 2300° | 0.04 | Plain | Flexible | 00000000 | 00000 |
3" | 50 | -50° to 2300° | 0.04 | Plain | Flexible | 00000000 | 00000 |
1/8" Thick. | |||||||
1" | 25 | -50° to 2300° | 0.2 | Plain | Flexible | 00000000 | 00000 |
1" | 50 | -50° to 2300° | 0.2 | Adhesive | Flexible | 00000000 | 000000 |
1 1/2" | 50 | -50° to 2300° | 0.2 | Adhesive | Flexible | 00000000 | 000000 |
2" | 25 | -50° to 2300° | 0.2 | Plain | Flexible | 00000000 | 00000 |
2" | 50 | -50° to 2300° | 0.2 | Adhesive | Flexible | 00000000 | 000000 |
3" | 25 | -50° to 2300° | 0.2 | Plain | Flexible | 00000000 | 00000 |
3" | 50 | -50° to 2300° | 0.2 | Adhesive | Flexible | 00000000 | 000000 |
1/4" Thick. | |||||||
1" | 25 | -50° to 2300° | 0.5 | Plain | Flexible | 00000000 | 000000 |
1" | 62 1/2 | -50° to 2300° | 0.5 | Adhesive | Flexible | 00000000 | 000000 |
1 1/2" | 62 1/2 | -50° to 2300° | 0.5 | Adhesive | Flexible | 00000000 | 000000 |
2" | 25 | -50° to 2300° | 0.5 | Plain | Flexible | 00000000 | 000000 |
2" | 62 1/2 | -50° to 2300° | 0.5 | Adhesive | Flexible | 00000000 | 000000 |
3" | 25 | -50° to 2300° | 0.5 | Plain | Flexible | 00000000 | 000000 |
3" | 62 1/2 | -50° to 2300° | 0.5 | Adhesive | Flexible | 00000000 | 00000000 |
Wd. | Lg., ft. | R Value | Backing Type | Flexibility | Each | |
1/4" Thick. | ||||||
---|---|---|---|---|---|---|
1" | 12 | 0.3 | Plain | Flexible | 0000000 | 00000 |
2" | 12 | 0.3 | Plain | Flexible | 0000000 | 00000 |
3" | 12 | 0.3 | Plain | Flexible | 0000000 | 00000 |
6" | 12 | 0.3 | Plain | Flexible | 0000000 | 00000 |
12" | 12 | 0.3 | Plain | Flexible | 0000000 | 00000 |
1/2" Thick. | ||||||
1" | 12 | 0.7 | Plain | Flexible | 0000000 | 00000 |
2" | 12 | 0.7 | Plain | Flexible | 0000000 | 00000 |
3" | 12 | 0.7 | Plain | Flexible | 0000000 | 00000 |
6" | 12 | 0.7 | Plain | Flexible | 0000000 | 00000 |
12" | 12 | 0.7 | Plain | Flexible | 0000000 | 00000 |
1" Thick. | ||||||
1" | 12 | 1 | Plain | Flexible | 0000000 | 00000 |
2" | 12 | 1 | Plain | Flexible | 0000000 | 00000 |
3" | 12 | 1 | Plain | Flexible | 0000000 | 00000 |
6" | 12 | 1 | Plain | Flexible | 0000000 | 00000 |
12" | 12 | 1 | Plain | Flexible | 0000000 | 00000 |
Wd. | Lg., ft. | Temp. Range, °F | R Value | Backing Type | Flexibility | Each | |
1/32" Thick. | |||||||
---|---|---|---|---|---|---|---|
1" | 25 | -40° to 1500° | 0 | Adhesive | Flexible | 000000 | 000000 |
2" | 25 | -40° to 1500° | 0 | Adhesive | Flexible | 000000 | 00000 |
3" | 25 | -40° to 1500° | 0 | Adhesive | Flexible | 000000 | 00000 |
1/16" Thick. | |||||||
1" | 25 | -40° to 1500° | 0.1 | Adhesive | Flexible | 000000 | 00000 |
2" | 25 | -40° to 1500° | 0.1 | Adhesive | Flexible | 000000 | 00000 |
3" | 25 | -40° to 1500° | 0.1 | Adhesive | Flexible | 000000 | 00000 |
1/8" Thick. | |||||||
1" | 25 | -40° to 1500° | 0.2 | Adhesive | Flexible | 000000 | 00000 |
2" | 25 | -40° to 1500° | 0.2 | Adhesive | Flexible | 000000 | 00000 |
3" | 25 | -40° to 1500° | 0.2 | Adhesive | Flexible | 000000 | 00000 |
1/4" Thick. | |||||||
1" | 25 | -40° to 1500° | 0.5 | Adhesive | Flexible | 0000000 | 000000 |
2" | 25 | -40° to 1500° | 0.5 | Adhesive | Flexible | 0000000 | 000000 |
3" | 25 | -40° to 1500° | 0.5 | Adhesive | Flexible | 0000000 | 000000 |
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
Plain Backing | Adhesive Backing | |||||||
---|---|---|---|---|---|---|---|---|
Thick. | Wd. | Lg., ft. | R Value | Flexibility | Each | Each | ||
1/8" | 2" | 30 | 0.5 | Flexible | 000000 | 00 | 0000000 | 000000 |
1/4" | 36" | 4 | 1 | Flexible | 000000 | 000000 | 0000000 | 00000 |
3/8" | 36" | 4 | 1.5 | Flexible | 000000 | 00000 | 0000000 | 00000 |
1/2" | 36" | 4 | 2 | Flexible | 000000 | 00000 | 0000000 | 00000 |
3/4" | 36" | 4 | 3 | Flexible | 000000 | 00000 | 0000000 | 00000 |
1" | 36" | 4 | 4 | Flexible | 000000 | 00000 | 0000000 | 00000 |
1 1/2" | 36" | 4 | 6 | Flexible | 000000 | 000000 | 0000000 | 000000 |