A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

Connect Parker modular filter/regulator/lubricator components with the same series number.

Connect SMC modular filter/regulator/lubricator components with the same series number.

Connect Festo modular filter/regulator/lubricator components with the same series number.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Mount these filters to a 35 mm DIN rail with the included brackets.

Replace failing or lost O-rings in Wilkerson modular compressed air filters.

Replace failing or lost O-rings in ASCO Numatics modular compressed air filters.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Generate clean air for instrumentation and applications with critical air requirements.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a cracked or lost sight dome on your Wilkerson modular compressed air lubricator.

Replace a cracked or lost sight dome on your Norgren modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your SMC modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your ARO modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.