Select the dimensions you need for custom-sized frames.

These filters are typically used as replacements in HVAC equipment.

A compound inhibits mildew, mold, and fungi growth.

A thick-gauge metal frame makes these filters more durable than other reusable filters.

Also known as metal mesh filters. These filters can be washed and reused.

An inherent electrostatic charge attracts dust and particles to these filters.

Rated MERV 13, these filters capture particles down to 0.3 microns.

Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.

Use in exhaust hoods to remove grease and oil from the air.

Cut these pads to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.

Cut these washable, reusable rolls to the size you need.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.

Add support to filter rolls and pads that have been cut to size.

These MERV 14 air filters capture particles down to 0.3 microns.

Rated MERV 11, these air filters capture particles down to 1 micron.

Remove small particles in lines that reach up to 5,000 psi to protect sensitive equipment, such as hydraulic controls.

Clean the air going into small blowers and air-powered equipment in tight spaces.

With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.

Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns.

Use one of these compact filters in a tight spot, or combine up to ten for a manifold application.

Stop oil mist and smoke from exiting your equipment and into your environment. These exhaust filters are commonly used with small oil-sealed vacuum pumps.

To keep airborne oil and odor out of your work environment, connect these filters to your high-vacuum oil pump. They purify pump exhaust in two stages: a fiberglass layer captures oil and collects it into a drain, and an active carbon layer removes any odor-causing oil or chemical vapors.

Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

These mufflers can be cleaned for an extended service life.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line.

These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.

Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35 dB.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line. They reduce noise by up to 45 dB.