Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter (both sold separately) when breathing through these respirators becomes difficult.

N95 respirators filter out 95% of solid particles. They are not oil resistant.

P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications. Made of Tychem 2000 (formerly known as Tychem QC), these hood respirators have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Respirators include a rechargeable lithium ion (Li-Ion) battery that provides approximately four hours of continuous use when fully charged. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

When working in confined spaces near hazardous chemicals, be prepared for an Immediately Dangerous to Life or Health (IDLH) atmosphere. Commonly stocked in labs, industrial facilities, or on gas lines, a worker can quickly strap on this apparatus for 30 minutes of breathable air. The full face mask forms a complete seal to prevent any contaminants from leaking in.

For fast access, hang on the wall using a mounting bracket (sold separately).

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection.

Pinlock suspension hats adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance.

Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extra hose to span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.