How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Rocker-Lug Fire-Fighting Hose Fittings
The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately). Fittings are brass for good corrosion resistance.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
Fire-Fighting Hose Fittings
Connect these fittings to fire hydrants and washdown equipment. They have a hex in the middle so you can tighten with a wrench. Fittings are brass for good corrosion resistance.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
Fire Hose Trade Size | ||||
|---|---|---|---|---|
| (A) | (B) | Material | Each | |
| 2 1/2 | 1 1/2 | Brass | 0000000 | 0000000 |
Fire Hose Trade Size | ||||
|---|---|---|---|---|
| (A) | (B) | Material | Each | |
| 1 1/2 | 2 1/2 | Brass | 0000000 | 000000 |
Pipe Size | ||||
|---|---|---|---|---|
| (A) | (B) | Material | Each | |
| 1 1/2 | 3/4 | Brass | 0000000 | 000000 |
Pin-Lug Fire-Fighting Hose Fittings
The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately). Fittings swivel until tightened, which makes installation easier. They are brass for good corrosion resistance.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads.
| Fire Hose Trade Size (A) | Pipe Size (B) | Material | Each | |
| 2 1/2 | 2 | Brass | 0000000 | 000000 |
| PIpe Size (A) | Fire Hose Trade Size (B) | Material | Each | |
| 2 | 2 1/2 | Brass | 0000000 | 000000 |
Diverting Valves with Fire-Fighting Hose Fittings
- Valve Type: Ball
- For Use With: Water
- Seal Material: Buna-N Rubber
Control the flow of water in two directions from a single source—these diverting valves have two balls and handles for independent operation of each outlet. They can direct flow to one side outlet at full capacity while shutting off flow to the second side outlet, direct flow to both side outlets at reduced capacity, or shut off flow to both side outlets. Valves have a brass body for good corrosion resistance. They are for use with fire-fighting hose.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
For technical drawings and 3-D models, click on a part number.
| Inlet Fire Hose Trade Size | Outlet Fire Hose Trade Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
| Inlet Pipe Size | Outlet Pipe Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |