About On/Off Valves
More
Threaded On/Off Valves for Fuel

- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
- Specifications Met: See table
Protect personnel and equipment in the presence of diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire. They have a lockable handle that can be fixed in place using a padlock (not included).
316 stainless steel valves are more corrosion resistant than steel valves.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Valves that meet API 641 have passed a test for emissions.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | For Max. Shackle Dia. | Specifications Met | Each | |
Steel Body—Graphite Seal | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||||
1/4 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1/4 | 10 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 00000 |
1/4 | 10 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/4 | 10 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/8 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
3/8 | 10 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 00000 |
3/8 | 10 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Standard | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/8 | 10 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Standard | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/2 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
1/2 | 16 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Full | 4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/2 | 16 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Full | 4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/2 | 18 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 00000 |
3/4 | 9 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 1/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
3/4 | 32 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 00000 |
3/4 | 32 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Full | 4 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/4 | 32 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Full | 4 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 | 14 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 3/4" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
1 | 45 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Standard | 4 1/2" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 | 62 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 3 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 00000 |
1 | 65 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Standard | 4 1/2" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 1/4 | 19 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 7/8" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/2 | 33 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 4 1/8" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/2 | 140 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 4 1/2" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 1/2 | 140 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Full | 5 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 1/2 | 140 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Full | 5 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
2 | 52 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 4 11/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
2 | 125 | 3600 psi @ 100° F | -20° to 180° | Not Rated | Standard | 6 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
2 | 125 | 6000 psi @ 100° F | -20° to 500° | Not Rated | Standard | 6 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
2 | 365 | 2220 psi @ 100° F | -20° to 500° | Not Rated | Full | 5" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
Steel Body—PTFE Plastic Seal | ||||||||||
NPT Female × NPT Female | ||||||||||
1/4 | 3 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
3/8 | 4 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
1/2 | 5 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/8" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 00000 |
3/4 | 9 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 13/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 | 14 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 1/4" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/4 | 22 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 9/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/2 | 50 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 7/8" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
2 | 81 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 4 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
316 Stainless Steel Body—Fluoroelastomer Rubber Seal | ||||||||||
NPT Female × NPT Female | ||||||||||
1/4 | 6.1 | 3600 psi @ 100° F | -40° to 185° | 29.4 | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/4 | 6.1 | 6000 psi @ 100° F | -70° to 550° | 29.4 | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/8 | 6.1 | 3600 psi @ 100° F | -40° to 185° | 29.4 | Standard | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/8 | 6.1 | 6000 psi @ 100° F | -70° to 550° | 29.4 | Standard | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/2 | 26 | 3600 psi @ 100° F | -40° to 185° | 29.4 | Full | 4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1/2 | 26 | 6000 psi @ 100° F | -70° to 550° | 29.4 | Full | 4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/4 | 61 | 3600 psi @ 100° F | -40° to 185° | 29.4 | Full | 4 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
3/4 | 61 | 6000 psi @ 100° F | -70° to 550° | 29.4 | Full | 4 5/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 | 114 | 3600 psi @ 100° F | -40° to 185° | 29.4 | Full | 4 3/4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
1 | 114 | 6000 psi @ 100° F | -70° to 550° | 29.4 | Full | 4 3/4" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 0000000 | 000000 |
316 Stainless Steel Body—Graphite Seal | ||||||||||
NPT Female × NPT Female | ||||||||||
1/4 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 00000 |
1/4 | 10 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 00000 |
3/8 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 00000 |
3/8 | 10 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 00000 |
1/2 | 3 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 2 13/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 00000 |
1/2 | 18 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 2 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 00000 |
3/4 | 9 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 1/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 00000 |
3/4 | 32 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 3" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 00000 |
1 | 14 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 3/4" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 00000 |
1 | 62 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 3 11/16" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 000000 |
1 1/4 | 19 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 3 7/8" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 000000 |
1 1/2 | 33 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 4 1/8" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 000000 |
1 1/2 | 140 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 4 1/2" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 000000 |
2 | 52 | 1000 psi @ 200° F | -20° to 500° | Not Rated | Standard | 4 11/16" | 9/32" | American Petroleum Institute Standard 607 - Edition 4 | 00000000 | 000000 |
2 | 365 | 2160 psi @ 100° F | -50° to 500° | Not Rated | Full | 5" | 5/16" | American Petroleum Institute Standard 607 - Edition 6 American Petroleum Institute Standard 608 American Petroleum Institute Standard 641 NACE (National Association of Corrosion Engineers) MR0175 ASME B16.34 | 00000000 | 000000 |
316 Stainless Steel Body—PTFE Plastic Seal | ||||||||||
NPT Female × NPT Female | ||||||||||
1/4 | 3 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
3/8 | 4 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1/2 | 5 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 5/8" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
3/4 | 9 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 2 13/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 | 14 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 1/4" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/4 | 22 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 9/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
1 1/2 | 50 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 3 7/8" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
2 | 81 | 2000 psi @ 250° F | -20° to 450° | 26 | Standard | 4 5/16" | 1/4" | American Petroleum Institute Standard 607 - Edition 4 | 0000000 | 000000 |
Easy-Maintenance Threaded On/Off Valves for Fuel


- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
- Seal Material: Glass-Filled PTFE Plastic
- Specifications Met: American Petroleum Institute Standard 598, American Petroleum Institute Standard 607 - Edition 6, American Petroleum Institute Standard 608 - Edition 6, American Petroleum Institute Standard 641, NACE (National Association of Corrosion Engineers) MR0175, ASME B16.11, ASME B16.34, MSS-SP 72
No need to completely remove these valves from your line for servicing. The bolted three-piece body comes apart, so you can easily access their internal components. Fire-tested to meet American Petroleum Institute (API) 607, these valves securely isolate diesel fuel, fuel oil, kerosene, and gasoline to prevent the spread of fire. They have also passed API 641 emissions tests, so they help reduce the risk of hazardous gas leaks. To prevent tampering, lock their handle in place with a padlock (not included).
All have a full port, so they will not restrict flow.
316 stainless steel valves resist corrosion better than steel valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Steel Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
1/4 | 8 | 1970 psi @ 100° F | -20° to 400° | 2 15/16" | 5/16" | 0000000 | 0000000 |
1/2 | 12 | 1970 psi @ 100° F | -20° to 400° | 3 1/16" | 5/16" | 0000000 | 000000 |
3/4 | 32 | 1970 psi @ 100° F | -20° to 400° | 3 3/4" | 5/16" | 0000000 | 000000 |
1 | 46 | 1970 psi @ 100° F | -20° to 400° | 4 1/4" | 5/16" | 0000000 | 000000 |
2 | 240 | 1970 psi @ 100° F | -20° to 400° | 6 5/16" | 3/8" | 0000000 | 000000 |
316 Stainless Steel Body | |||||||
NPT Female × NPT Female | |||||||
1/4 | 8 | 1920 psi @ 100° F | -20° to 400° | 2 15/16" | 5/16" | 0000000 | 000000 |
1/2 | 12 | 1920 psi @ 100° F | -20° to 400° | 3 1/16" | 5/16" | 0000000 | 000000 |
3/4 | 32 | 1920 psi @ 100° F | -20° to 400° | 3 3/4" | 5/16" | 0000000 | 000000 |
1 | 46 | 1920 psi @ 100° F | -20° to 400° | 4 1/4" | 5/16" | 0000000 | 000000 |
2 | 240 | 1920 psi @ 100° F | -20° to 400° | 6 5/16" | 3/8" | 0000000 | 000000 |
On/Off Valves with Yor-Lok Fittings for Fuel

- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
- Seal Material: PTFE Plastic
- Specifications Met: ASME B16.34
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. Designed for transferring diesel fuel, fuel oil, gasoline, and kerosene, these valves have a 316 stainless steel body for excellent corrosion resistance. All are standard port, so they slightly restrict flow.
Flanged On/Off Valves for Fuel


- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
- Seal Material: Graphite
- Specifications Met: American Petroleum Institute Standard 598, American Petroleum Institute Standard 607 - Edition 6, American Petroleum Institute Standard 608, American Petroleum Institute Standard 641, ASME B16.10, ASME B16.34, ASME B16.5, MSS-SP-25, MSS-SP-72, ISO 5211
Keep your worksite safe when working with diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire. They have also passed fugitive emissions testing and meet API 641 standards to reduce the risk of hazardous gas leaks.
Bolt these valves to ANSI flanges. They meet ASME standards for dimensions, material, and pressure-temperature rating. You can also attach an air-powered or electric actuator to these valves using the four actuator mounting holes. This allows you to switch them from manual to automatic operations.
These valves have a lockable handle that can be secured in place using a padlock (not included). All are full port, so they do not restrict flow.
316 stainless steel valves are more corrosion resistant than steel valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Bolts | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Pressure Class | Flange OD | Circle Dia. | No. of Holes | Hole Dia. | Included | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Max. Shackle Dia. | Actuator Mounting Hole Thread Size | Each | |
Steel Body | ||||||||||||||
Flanged × Flanged | ||||||||||||||
1/2 | 150 | 3 1/2" | 2 3/8" | 4 | 5/8" | No | 26 | 285 psi @ 100° F | -20° to 450° | 4 1/4" | 5/16" | M5 × 0.8 mm | 0000000 | 0000000 |
3/4 | 150 | 3 7/8" | 2 3/4" | 4 | 5/8" | No | 50 | 285 psi @ 100° F | -20° to 450° | 4 5/8" | 5/16" | M5 × 0.8 mm | 0000000 | 000000 |
1 | 150 | 4 1/4" | 3 1/8" | 4 | 5/8" | No | 94 | 285 psi @ 100° F | -20° to 450° | 5" | 5/16" | M6 × 1 mm | 0000000 | 000000 |
1 1/2 | 150 | 5" | 3 7/8" | 4 | 5/8" | No | 260 | 285 psi @ 100° F | -20° to 450° | 6 1/2" | 3/8" | M8 × 1.25 mm | 0000000 | 000000 |
2 | 150 | 6" | 4 3/4" | 4 | 3/4" | No | 480 | 285 psi @ 100° F | -20° to 450° | 7" | 3/8" | M8 × 1.25 mm | 0000000 | 000000 |
3 | 150 | 7 1/2" | 6" | 4 | 3/4" | No | 1,100 | 285 psi @ 100° F | -20° to 450° | 8" | 3/8" | M10 × 1.5 mm | 0000000 | 00000000 |
4 | 150 | 9" | 7 1/2" | 8 | 3/4" | No | 2,100 | 285 psi @ 100° F | -20° to 450° | 9" | 3/8" | M10 × 1.5 mm | 0000000 | 00000000 |
316 Stainless Steel Body | ||||||||||||||
Flanged × Flanged | ||||||||||||||
1/2 | 150 | 3 1/2" | 2 3/8" | 4 | 5/8" | No | 26 | 275 psi @ 100° F | -20° to 450° | 4 1/4" | 5/16" | M5 × 0.8 mm | 0000000 | 000000 |
3/4 | 150 | 3 7/8" | 2 3/4" | 4 | 5/8" | No | 50 | 275 psi @ 100° F | -20° to 450° | 4 5/8" | 5/16" | M5 × 0.8 mm | 0000000 | 000000 |
1 | 150 | 4 1/4" | 3 1/8" | 4 | 5/8" | No | 94 | 275 psi @ 100° F | -20° to 450° | 5" | 5/16" | M6 × 1 mm | 0000000 | 000000 |
1 1/2 | 150 | 5" | 3 7/8" | 4 | 5/8" | No | 260 | 275 psi @ 100° F | -20° to 450° | 6 1/2" | 3/8" | M8 × 1.25 mm | 0000000 | 00000000 |
2 | 150 | 6" | 4 3/4" | 4 | 3/4" | No | 480 | 275 psi @ 100° F | -20° to 450° | 7" | 3/8" | M8 × 1.25 mm | 0000000 | 00000000 |
3 | 150 | 7 1/2" | 6" | 4 | 3/4" | No | 1,100 | 275 psi @ 100° F | -20° to 450° | 8" | 3/8" | M10 × 1.5 mm | 0000000 | 00000000 |
4 | 150 | 9" | 7 1/2" | 8 | 3/4" | No | 2,100 | 275 psi @ 100° F | -20° to 450° | 9" | 3/8" | M10 × 1.5 mm | 0000000 | 00000000 |
Socket-Connect On/Off Valves for Fuel


- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline, Kerosene
- Seal Material: Glass-Filled PTFE Plastic
- Specifications Met: American Petroleum Institute Standard 598, American Petroleum Institute Standard 607 - Edition 6, American Petroleum Institute Standard 608 - Edition 6, American Petroleum Institute Standard 641, ASME B16.11, ASME B16.34, MSS-SP 72, NACE (National Association of Corrosion Engineers) MR0175
Install these valves to start and stop the flow of diesel fuel, fuel oil, kerosene, and gasoline. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire. They have also passed fugitive emissions testing and meet API 641 standards to reduce the risk of hazardous gas leaks.
Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection to your pipeline. To service these valves, unbolt the three-piece body. You can then access the internal components without cutting the welded connection. These valves have a lockable handle that can be secured using a padlock (not included). All are full port, so they do not restrict flow.
316 stainless steel valves are more corrosion resistant than steel valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | For Pipe Schedule | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Steel Body | ||||||||
---|---|---|---|---|---|---|---|---|
Socket Connect × Socket Connect | ||||||||
1/4 | Any | 8 | 1970 psi @ 100° F | -20° to 400° | 2 15/16" | 5/16" | 0000000 | 000000 |
1/2 | Any | 12 | 1970 psi @ 100° F | -20° to 400° | 3 1/16" | 5/16" | 0000000 | 000000 |
3/4 | Any | 32 | 1970 psi @ 100° F | -20° to 400° | 3 3/4" | 5/16" | 0000000 | 000000 |
1 | Any | 46 | 1970 psi @ 100° F | -20° to 400° | 4 1/4" | 5/16" | 0000000 | 000000 |
2 | Any | 240 | 1970 psi @ 100° F | -20° to 400° | 6 5/16" | 3/8" | 0000000 | 000000 |
316 Stainless Steel Body | ||||||||
Socket Connect × Socket Connect | ||||||||
1/4 | Any | 8 | 1920 psi @ 100° F | -20° to 400° | 2 15/16" | 5/16" | 0000000 | 000000 |
1/2 | Any | 12 | 1920 psi @ 100° F | -20° to 400° | 3 1/16" | 5/16" | 0000000 | 000000 |
3/4 | Any | 32 | 1920 psi @ 100° F | -20° to 400° | 3 3/4" | 5/16" | 0000000 | 000000 |
1 | Any | 46 | 1920 psi @ 100° F | -20° to 400° | 4 1/4" | 5/16" | 0000000 | 000000 |
2 | Any | 240 | 1920 psi @ 100° F | -20° to 400° | 6 5/16" | 3/8" | 0000000 | 00000000 |