About Structural Adhesives
More
Firebrick Bonding Mortar
- Max. Temperature: 3000° F
- Density: 129 lbs./cu. ft.
- Color: Gray
Lay, coat, and bond firebricks. Apply this mortar with a trowel. One pail sets approximately 40 bricks.
| Container Net Weight, lbs. | Approximate Coverage | Each | |
| 15 | 40 Bricks | 000000 | 000000 |
Extreme-Temperature Cement
- Max. Temperature: 2500° F
- Density: 122 lbs./cu. ft.
- Color: Beige
Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula. A minimum temperature of 212° F is required to harden. Cut hardened cement with a carbide-tipped saw.
Firebrick Repair Coatings
- Temperature Range: -50° to 2350° F
- Density: 100 lbs./cu. ft.
- Color: Beige
Renew heat resistance and performance of worn firebrick. Apply coating with a brush or spray on for a crack-free seal.
| Container Size, gal. | Approximate Coverage, sq. ft. | Each | |
| 1 | 93 | 000000 | 0000000 |
Thick High-Temperature Gasketing Adhesives in Cartridges
The adhesive seals fiberglass gaskets into stove doors as well as seals cracks in metal. Use the cartridge with a standard caulk gun for quick and easy dispensing.
| Container Size, fl. oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
| 10.3 | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 000000 |
Thick High-Temperature Gasketing Adhesives
Seal fiberglass gaskets into stove doors as well as seals cracks in metal.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Heating Requirements to Reach Full Strength | Max. Temp., °F | Color | For Use On | Each | |
| 2.3 | Tube | 60 | 3 | 1 hr. air dry then 2 hrs. @ 500° F | 2000° | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass, Masonry | 0000000 | 000000 |
Thin High-Temperature Gasketing Adhesives in Cartridges
The adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel. Use the cartridge with a standard caulk gun for quick and easy dispensing.
| Container Size, fl. oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Max. Temp., °F | Color | For Use On | Each | |
| 10.3 | 30 | 24 | 2000° | Black | Steel, Cast Iron, Fiberglass | 0000000 | 000000 |
Thin High-Temperature Gasketing Adhesives
This adhesive is easy flowing for bonding fiberglass gaskets to cast iron and steel.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Max. Temp., °F | Color | For Use On | Each | |
| 2.3 | Tube | 30 | 24 | 2000° | Black | Steel, Cast Iron, Fiberglass | 0000000 | 00000 |
Extreme-Temperature Gasket Maker Sealants in Cartridges
These gasket makers form a tight seal on furnace doors, exhaust systems, stoves, and other high-temperature applications. They are fire resistant and resist most acids, solvents, and corrosives. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and to make it easy to form irregular-shaped gaskets.
Temp. Range, °F | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Min. Temp. | Max. Temp. | Color | For Use On | Each | |
| 11 | 0.125" | 20 | 72 | Not Rated | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
| 11 | 0.25" | 20 | 72 | -300° | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 00000 |
Extreme-Temperature Gasket Maker Sealants
Use these gasket makers to form a tight seal on furnace doors, exhaust systems, stoves, and other high-temperature applications. They are fire resistant and resist most acids, solvents, and corrosives. They are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and they make it easy to form irregular-shaped gaskets.
Container | Temp. Range, °F | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, lbs. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Min. Temp. | Max. Temp. | Color | For Use On | Each | |
| 1 | Jar | 0.125" | 20 | 72 | Not Rated | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
| 3 1/2 | Jar | 0.25" | 20 | 72 | -300° | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
| 7 | Jar | 0.25" | 20 | 72 | -300° | 2300° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic | 0000000 | 000000 |
Flame-Retardant High-Temperature Gasket Maker Sealants
Often used to create gaskets in ovens and applications where fire is a concern, these gasket makers meet UL 94 V-0 for flame retardance and withstand temperatures up to 500° F. They replace rubber and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. Push the plunger to precisely dispense small amounts.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, min. | Cure Type | Temperature Range, ° F | Color | For Use On | Specifications Met | Each | |
| 1.700 | Syringe | 0.250" | 5 | 30 | Room Temperature | -70° to 500° | Green | Aluminum, Copper, Steel, Stainless Steel, Titanium, Ceramic | UL 94 V-0 | 0000000 | 0000000 |
High-Temperature Surface Fillers
Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Approximate Coverage @ Thick. | For Use Outdoors | Color | For Use On | Each | |
| 4 fl. oz. | Syringe | 20 | 8 | Putty | 20 sq. in. @ 1/4" | No | White | Ceramic, Masonry | 0000000 | 000000 |
| 11 fl. oz. | Cartridge | 20 | 8 | Putty | 60 sq. in. @ 1/4" | No | White | Ceramic, Masonry | 0000000 | 00000 |
| 1 gal. | Pail | 20 | 8 | Putty | 720 sq. in. @ 1/4" | No | White | Ceramic, Masonry | 0000000 | 000000 |
Ceramic Adhesives
Often used for bonding and repair on exhaust systems, diesel engines, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation. Pastes will not drip or sag while hardening on a vertical surface, while thick liquids flow into small spaces and are easy to spread.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Consistency | Viscosity, cP | Max. Temp., °F | Color | For Joining | Each | |
| 8 | Pail | 20 min. | 48 hrs. | 0.865 | Thick Liquid | 90,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |
| 8 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 130,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 00000 |
| 8 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 190,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 00000 |
| 16 | Pail | 15 min. | 24 hrs. | 1.44 | Thick Liquid | 22,500 | 4000° | Beige | Ceramic, Masonry | 0000000 | 000000 |
| 32 | Pail | 15 min. | 24 hrs. | 1.44 | Thick Liquid | 22,500 | 4000° | Beige | Ceramic, Masonry | 0000000 | 000000 |
| 32 | Pail | 20 min. | 24 hrs. | 0.288 | Thick Liquid | 35,000 | 2300° | White | Ceramic | 0000000 | 000000 |
| 64 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 130,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |
| 64 | Pail | 20 min. | 48 hrs. | 0.865 | Paste | 190,000 | 2300° | Gray | Ceramic, Metal | 0000000 | 000000 |