These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Trim the center of these grommets to the size you need for a tight seal around wire, cable, and cords. Use them to keep out dust, debris, and moisture.

Rated IPX6 and IPX7, these grommets form liquid-tight seals around wire, cable, and cords to protect them against high-pressure washdowns as well as temporary submersion in a maximum of one meter of water. Often used in marine, antenna cable, and lighting cable applications, they can be used outdoors.

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Also known as mouse tails, these tiny plugs fit hole IDs as small as 0.025". They're commonly used for masking parts during finishing applications. Use the end of the plug to pull it into a through hole to form a tight seal.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Push these plugs into an opening and friction holds them in place.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Tapered prongs or a snap-in ring securely hold these plugs in place.

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.