Application Application |
|---|
|
Arc Rating Arc Rating |
|---|
|
|
Flame-Resistant Application Flame-Resistant Application |
|---|
|
Material Material |
|---|
|
Lens Properties Lens Properties |
|---|
|
Component Component |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Closure Type Closure Type |
|---|
|
About Flame-Resistant Arc-Rated Personal Protection
More
Arc-Flash-Protection Equipment Kits
For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag. All contents meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All hard hats have a ratchet adjustment with an easy-turn knob.
Style A kits come with a hard hat, face shield, hood, safety glasses, and storage bag.
Style B kits come with coveralls, hard hat, face shield, hood, safety glasses, and two storage bags.When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.
Hard Hat | Face Shield | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Arc Rating, cal/cm2 | Arc Rated PPE Category | No. of Suspension Points | Material | Hat Size | Lens Material | Lens Ht. | Lens Wd. | Lens Thick. | Each | |
| 12 | 2 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 10" | 11 1/2" | 0.06" | 0000000 | 0000000 |
Hard Hat | Face Shield | Coverall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arc Rating, cal/cm2 | Arc Rated PPE Category | No. of Suspension Points | Material | Hat Size | Lens Material | Lens Ht. | Lens Wd. | Lens Thick. | Material | Choose a Size (Chest Size) | Each | |
| 8 | 2 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 10" | 11 1/2" | 0.06" | Cotton/Nylon Fabric Blend | 000000 | 0000000 | |
| 12 | 2 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 10" | 11 1/2" | 0.06" | Cotton/Nylon Fabric Blend | 000000 | 000000 | |
Arc-Flash-Protection Face Shields
Provide protection from low-level arc flash hazards when a full hood is not necessary. These face shields meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Meets ANSI/ISEA Z87.1 basic-impact standards when worn with safety glasses or goggles. The chin guard offers added protection. Hard hats have a ratchet adjustment with an easy-turn knob.
Arc-Flash-Protection Hoods
These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.
Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).
Aluminized Hoods for Heat Protection
Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.
Hoods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Lens | Replacement Face Shields | ||||||||||
| Material | Size | Color | Lg. | Color | Material | Ht. | Wd. | Each | Each | ||
| Rayon Fabric | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 0000000 | 0000000 | 000000 |
| Kevlar/Nomex Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 0000000 | 000000 | 0000000 | 00000 |
| PBI/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
| Carbon/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
Welding Face Masks
These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting.
Nomex aramid is heavier than PBI, yet breathable and moisture wicking.
PBI is lightweight and provides better wear- and heat-resistance than Nomex.
Flame- and Arc-Flash-Protection Face Masks
Protect your head from electrical arc flashes. These face masks won’t melt or drip when exposed to intermittent flames. They meet NFPA 70E standards for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Masks are soft, breathable, and washable.
Westex® UltraSoft® Rib fabric is a lightweight material that’s 88% flame-resistant cotton and 12% nylon knit.
CarbonX fabric is double-layered for better flame resistance than Westex® UltraSoft® Rib fabric.
Flame- and Arc-Flash-Protection Tie Caps
Rated NFPA 70E, these tie caps shield hair from electrical arc flashes, low radiant heat, and minor sparks. Made of cotton, they have an adjustable rear tie to securely fit most heads. They also have two layers of cotton around the forehead for added comfort. These caps remain flame resistant through up to 50 washes.
| Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Closure Type | Specifications Met | Color | Size | Each | |
| Cotton Fabric | 7.2 | 1 | Adjustable Tie | NFPA 70E | Dark Blue | One Size | 00000000 | 000000 |
Flame and Arc-Flash Cold-Protection Face Masks
These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.
| Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
| Aramid/Viscose Fabric Blend | 12.2 | 2 | NFPA 70E | Blue | One Size | 00000000 | 000000 |
Flame and Arc-Flash Cold-Protection Hats
These hats meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.
| Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
| Aramid/Viscose Fabric Blend | 12.2 | 2 | NFPA 70E | Blue | One Size | 00000000 | 000000 |