In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

More sustainable than standard UHMW, these sheets and bars are made from partially recycled material, so they have a lower carbon footprint.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

This oil-filled material is self-lubricating for an extra-slippery surface.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This material prevents the buildup of static charges.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

This blended material quickly diverts damaging static charges.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

A glass filler is added to this this PEEK material to offer increased durability over standard PEEK in high-stress structural applications.

Stronger and more rigid than Torlon 4301 and 4203 because they’re filled with glass, these Torlon 5030 rods are also electrical insulators like Torlon 4203.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Use these Torlon 4203 rods instead of standard Torlon PAI to create parts that not only withstand extreme temperatures, but also are electrical insulators.

Vespel® polyimide offers excellent strength, even at extreme temperatures.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

This film conducts electricity to prevent the buildup of static charges.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

Offering excellent resistance to shock, PPSU is frequently fabricated into vehicle parts and machine components that are subject to vibration. It withstands higher temperatures than polysulfone and can handle repeated autoclaving cycles.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

When compared to uncoated cast acrylic, this clear-coated cast acrylic is 45 times more scratch resistant.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.

With a clear coating that provides protection from abrasion, UV light, and harsh cleaners, this polycarbonate is often used to create transit shelters and equipment shields.

This polycarbonate has a static-dissipative coating that prevents electrostatic discharge from damaging sensitive electronic equipment.

Static cling allows this PVC film to stick without an adhesive.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Unlike similar U-channels, these GPO3 fiberglass hat channels have flanges for mounting to flat surfaces. Use them to route and insulate wire in humid environments.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Also known as fishpaper.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

These 90° angles meet UL 94V0 for flame retardance.

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.