Hardness Rating Hardness Rating |
---|
|
Material Surface Material Surface |
---|
|
Density Density |
---|
|
More
More
More
Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips. Foam, but not the adhesive, meets UL flame extinguishing specifications. Silicone maintains its flexibility across a wide range of temperatures. This foam has closed-cell construction, which restricts water, air, and gases from being absorbed.
Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
---|---|---|---|
1/4" | -0.032" to 0.046" | 000000000 | 000000 |
3/8" | -0.046" to 0.046" | 000000000 | 00000 |
1/2" | -0.046" to 0.046" | 000000000 | 00000 |
5/8" | -0.062" to 0.062" | 000000000 | 00000 |
3/4" | -0.093" to 0.093" | 000000000 | 00000 |
1" | -0.125" to 0.125" | 000000000 | 00000 |
1 1/4" | -0.156" to 0.156" | 000000000 | 00000 |
1 1/2" | -0.188" to 0.188" | 000000000 | 00000 |
2" | -0.188" to 0.188" | 000000000 | 000000 |
12" × 12" | |||
1/4" | -0.032" to 0.046" | 000000000 | 00000 |
3/8" | -0.046" to 0.046" | 000000000 | 00000 |
1/2" | -0.046" to 0.046" | 000000000 | 00000 |
5/8" | -0.062" to 0.062" | 000000000 | 00000 |
3/4" | -0.093" to 0.093" | 000000000 | 00000 |
1" | -0.125" to 0.125" | 000000000 | 000000 |
1 1/4" | -0.156" to 0.156" | 000000000 | 000000 |
1 1/2" | -0.188" to 0.188" | 000000000 | 000000 |
2" | -0.188" to 0.188" | 000000000 | 000000 |
24" × 24" | |||
1/4" | -0.032" to 0.046" | 000000000 | 000000 |
3/8" | -0.046" to 0.046" | 000000000 | 000000 |
1/2" | -0.046" to 0.046" | 000000000 | 000000 |
5/8" | -0.062" to 0.062" | 000000000 | 000000 |
3/4" | -0.093" to 0.093" | 000000000 | 000000 |
1" | -0.125" to 0.125" | 000000000 | 000000 |
1 1/4" | -0.156" to 0.156" | 000000000 | 000000 |
1 1/2" | -0.188" to 0.188" | 000000000 | 000000 |
2" | -0.188" to 0.188" | 000000000 | 000000 |
36" × 36" | |||
1/4" | -0.032" to 0.046" | 000000000 | 000000 |
3/8" | -0.046" to 0.046" | 000000000 | 000000 |
1/2" | -0.046" to 0.046" | 000000000 | 000000 |
5/8" | -0.062" to 0.062" | 000000000 | 000000 |
3/4" | -0.093" to 0.093" | 000000000 | 000000 |
1" | -0.125" to 0.125" | 000000000 | 000000 |
1 1/4" | -0.156" to 0.156" | 000000000 | 00000000 |
1 1/2" | -0.188" to 0.188" | 000000000 | 00000000 |
2" | -0.188" to 0.188" | 000000000 | 00000000 |
Adhesive | |||||
---|---|---|---|---|---|
Thick. | Thick. Tolerance | Type | Temperature Range, °F | Each | |
12" × 12" | |||||
1/4" | -0.032" to 0.046" | Acrylic | -30° to 220° | 000000000 | 000000 |
3/8" | -0.046" to 0.046" | Acrylic | -30° to 220° | 000000000 | 00000 |
1/2" | -0.046" to 0.046" | Acrylic | -30° to 220° | 000000000 | 000000 |
5/8" | -0.062" to 0.062" | Acrylic | -30° to 220° | 000000000 | 000000 |
3/4" | -0.093" to 0.093" | Acrylic | -30° to 220° | 000000000 | 000000 |
1" | -0.125" to 0.125" | Acrylic | -30° to 220° | 000000000 | 000000 |
1 1/4" | -0.156" to 0.156" | Acrylic | -30° to 220° | 000000000 | 000000 |
1 1/2" | -0.188" to 0.188" | Acrylic | -30° to 220° | 000000000 | 000000 |
2" | -0.188" to 0.188" | Acrylic | -30° to 220° | 000000000 | 000000 |
24" × 24" | |||||
1/4" | -0.032" to 0.046" | Acrylic | -30° to 220° | 000000000 | 000000 |
3/8" | -0.046" to 0.046" | Acrylic | -30° to 220° | 000000000 | 000000 |
1/2" | -0.046" to 0.046" | Acrylic | -30° to 220° | 000000000 | 000000 |
5/8" | -0.062" to 0.062" | Acrylic | -30° to 220° | 000000000 | 000000 |
3/4" | -0.093" to 0.093" | Acrylic | -30° to 220° | 000000000 | 000000 |
1" | -0.125" to 0.125" | Acrylic | -30° to 220° | 000000000 | 000000 |
1 1/4" | -0.156" to 0.156" | Acrylic | -30° to 220° | 000000000 | 000000 |
1 1/2" | -0.188" to 0.188" | Acrylic | -30° to 220° | 000000000 | 000000 |
2" | -0.188" to 0.188" | Acrylic | -30° to 220° | 000000000 | 000000 |
Thick. | Thick. Tolerance | Each | |
1/2" × 10 ft. | |||
---|---|---|---|
1/32" | -0.016" to 0.016" | 000000000 | 000000 |
1/16" | -0.016" to 0.016" | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | 000000000 | 00000 |
3/8" | -0.045" to 0.045" | 000000000 | 00000 |
1/2" | -0.050" to 0.050" | 000000000 | 00000 |
1" × 10 ft. | |||
1/32" | -0.016" to 0.016" | 000000000 | 00000 |
1/16" | -0.016" to 0.016" | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | 000000000 | 00000 |
3/8" | -0.045" to 0.045" | 000000000 | 00000 |
1/2" | -0.050" to 0.050" | 000000000 | 00000 |
2" × 10 ft. | |||
1/32" | -0.016" to 0.016" | 000000000 | 00000 |
1/16" | -0.016" to 0.016" | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | 000000000 | 00000 |
3/8" | -0.045" to 0.045" | 000000000 | 000000 |
1/2" | -0.050" to 0.050" | 000000000 | 000000 |
Adhesive | |||||
---|---|---|---|---|---|
Thick. | Thick. Tolerance | Type | Temperature Range, °F | Each | |
1/2" × 10 ft. | |||||
1/32" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 000000 |
1/16" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/8" | -0.045" to 0.045" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/2" | -0.050" to 0.050" | Acrylic | -40° to 350° | 000000000 | 00000 |
1" × 10 ft. | |||||
1/32" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/16" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/8" | -0.045" to 0.045" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/2" | -0.050" to 0.050" | Acrylic | -40° to 350° | 000000000 | 000000 |
2" × 10 ft. | |||||
1/32" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/16" | -0.016" to 0.016" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/32" | -0.020" to 0.020" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/8" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
3/16" | -0.025" to 0.025" | Acrylic | -40° to 350° | 000000000 | 00000 |
1/4" | -0.030" to 0.030" | Acrylic | -40° to 350° | 000000000 | 000000 |
3/8" | -0.045" to 0.045" | Acrylic | -40° to 350° | 000000000 | 000000 |
1/2" | -0.050" to 0.050" | Acrylic | -40° to 350° | 000000000 | 000000 |
This trim meets FMVSS-302 Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA (National Fire Protection Agency) standards. This trim has a metal core for added strength and stability. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact. Push this trim onto an edge and it grips on three sides for a tight hold. All are flexible so it can bend along a gradual curve. This trim has a hard rating to withstand high levels of impact. It's nonmarking and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Specifications Met | Color | Available Lengths, ft. | 1-99 | 100-Up | |
Plastic | ||||||||||||||
Style 1 | ||||||||||||||
1/4" | 25/64" | 29/64" | 1/2" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 00000 | 00000 | |
1/4" | 19/32" | 27/64" | 11/16" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
Style 2 | ||||||||||||||
1/8" | 29/64" | 21/64" | 9/16" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
1/8" | 43/64" | 19/64" | 3/4" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
5/32" | 7/16" | 23/64" | 9/16" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
5/32" | 21/32" | 21/64" | 3/4" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
3/16" | 13/32" | 25/64" | 17/32" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 | |
3/16" | 21/32" | 23/64" | 23/32" | Flexible | Hard | -20° to 150° | Yes | Yes | FMVSS-302, NFPA Standards, UL 94 HB | Black | 00000000 | 0000 | 0000 |
These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim. They resist water, sunlight, and ozone. All come with a material certificate that includes their traceable lot number, cure date, and testing confirmation.
Thickness | Thickness Tolerance | Choose a Durometer | Each | |
6" × 6" | ||||
---|---|---|---|---|
1/16" | -0.016" to +0.016" | 00000000 | 000000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 0000000 | 00000 | |
3/8" | -0.047" to +0.047" | 00000000 | 00000 | |
12" × 12" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 00000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 00000000 | 00000 | |
3/8" | -0.047" to +0.047" | 00000000 | 00000 | |
12" × 24" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 00000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 00000000 | 00000 | |
3/8" | -0.047" to +0.047" | 0000000 | 000000 | |
24" × 36" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 00000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 00000000 | 000000 | |
3/8" | -0.047" to +0.047" | 00000000 | 000000 | |
36" × 48" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 000000 | |
1/8" | -0.020" to +0.020" | 00000000 | 000000 | |
1/4" | -0.031" to +0.031" | 00000000 | 000000 | |
3/8" | -0.047" to +0.047" | 00000000 | 000000 |
Thickness | Thickness Tolerance | Choose a Durometer | Each | |
2" × 36" | ||||
---|---|---|---|---|
1/16" | -0.016" to +0.016" | 00000000 | 000000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 00000000 | 00000 | |
3/8" | -0.047" to +0.047" | 00000000 | 00000 | |
4" × 36" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 00000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 00000000 | 00000 | |
3/8" | -0.047" to +0.047" | 00000000 | 00000 | |
6" × 36" | ||||
1/16" | -0.016" to +0.016" | 00000000 | 00000 | |
1/8" | -0.020" to +0.020" | 00000000 | 00000 | |
1/4" | -0.031" to +0.031" | 0000000 | 00000 | |
3/8" | -0.047" to +0.047" | 00000000 | 00000 |