Search Results
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
Overall Length Overall Length |
|---|
Housing Material Housing Material |
|---|
|
ID ID |
|---|
|
|
|
Alignment Style Alignment Style |
|---|
|
Bearing Material Bearing Material |
|---|
|
Lubrication Lubrication |
|---|
|
For Shaft Material For Shaft Material |
|---|
|
Ball Material Ball Material |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
For Minimum Stainless Steel Shaft Hardness For Minimum StainlessSteel Shaft Hardness |
|---|
|
For Minimum Steel Shaft Hardness For Minimum SteelShaft Hardness |
|---|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
About Linear Bearings
More
Flange-Mounted Linear Ball Bearings
Round Flange
Square Flange
The flanged housing makes these bearings a good solution for vertical linear motion applications. All are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.
For technical drawings and 3-D models, click on a part number.
Overall | Flange | Load Capacity, lbs. | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Thick. | OD | Bolt Circle Dia. | OD | Dynamic | Static | Temperature Range, °F | For Shaft Material | No. of | Dia. | Each | |
Fixed Alignment | |||||||||||||||
Steel Bearings with Round Flanged Housing | |||||||||||||||
| 1/4" | 3/4" | 1 1/4" | 1 1/4" | 1/4" | 1 1/4" | 7/8" | 1/2" | 45 | 60 | -4° to 176° | Steel, Stainless Steel | 4 | 5/32" | 0000000 | 000000 |
| 1/4" | 1 3/8" | 1 1/4" | 1 1/4" | 1/4" | 1 1/4" | 7/8" | 1/2" | 70 | 115 | -4° to 176° | Steel, Stainless Steel | 4 | 5/32" | 0000000 | 00000 |
| 3/8" | 7/8" | 1 1/2" | 1 1/2" | 1/4" | 1 1/2" | 1 1/16" | 5/8" | 50 | 70 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/8" | 1 5/8" | 1 1/2" | 1 1/2" | 1/4" | 1 1/2" | 1 1/16" | 5/8" | 75 | 140 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 1 1/4" | 1 3/4" | 1 3/4" | 1/4" | 1 3/4" | 1 5/16" | 7/8" | 110 | 175 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 2 3/8" | 1 3/4" | 1 3/4" | 1/4" | 1 3/4" | 1 5/16" | 7/8" | 180 | 350 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 5/8" | 1 1/2" | 2" | 2" | 1/4" | 2" | 1 9/16" | 1 1/8" | 170 | 265 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 5/8" | 2 13/16" | 2" | 2" | 1/4" | 2" | 1 9/16" | 1 1/8" | 275 | 525 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 1 5/8" | 2 3/16" | 2 3/16" | 5/16" | 2 3/16" | 1 23/32" | 1 1/4" | 190 | 305 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 00000 |
| 3/4" | 3 1/8" | 2 3/16" | 2 3/16" | 5/16" | 2 3/16" | 1 23/32" | 1 1/4" | 305 | 615 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 2 1/4" | 2 1/2" | 2 1/2" | 5/16" | 2 1/2" | 2 1/32" | 1 9/16" | 220 | 350 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 4 5/16" | 2 1/2" | 2 1/2" | 5/16" | 2 1/2" | 2 1/32" | 1 9/16" | 350 | 705 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1 1/4" | 2 5/8" | 3 1/8" | 3 1/8" | 3/8" | 3 1/8" | 2 9/16" | 2" | 350 | 615 | -4° to 176° | Steel, Stainless Steel | 4 | 9/32" | 0000000 | 00000 |
| 1 1/4" | 5" | 3 1/8" | 3 1/8" | 3/8" | 3 1/8" | 2 9/16" | 2" | 560 | 1,200 | -4° to 176° | Steel, Stainless Steel | 4 | 9/32" | 0000000 | 000000 |
| 1 1/2" | 3" | 3 3/4" | 3 3/4" | 1/2" | 3 3/4" | 3 1/16" | 2 3/8" | 490 | 900 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 1 1/2" | 5 11/16" | 3 3/4" | 3 3/4" | 1/2" | 3 3/4" | 3 1/16" | 2 3/8" | 770 | 1,800 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 2" | 4" | 4 3/8" | 4 3/8" | 1/2" | 4 3/8" | 3 11/16" | 3" | 855 | 1,700 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 2" | 7 3/4" | 4 3/8" | 4 3/8" | 1/2" | 4 3/8" | 3 11/16" | 3" | 1,300 | 3,500 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
Steel Bearings with Square Flanged Housing | |||||||||||||||
| 1/4" | 3/4" | 1" | 1" | 1/4" | __ | 7/8" | 1/2" | 45 | 60 | -4° to 176° | Steel, Stainless Steel | 4 | 5/32" | 0000000 | 00000 |
| 1/4" | 1 3/8" | 1" | 1" | 1/4" | __ | 7/8" | 1/2" | 70 | 115 | -4° to 176° | Steel, Stainless Steel | 4 | 5/32" | 0000000 | 00000 |
| 3/8" | 7/8" | 1 1/4" | 1 1/4" | 1/4" | __ | 1 1/16" | 5/8" | 50 | 70 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/8" | 1 5/8" | 1 1/4" | 1 1/4" | 1/4" | __ | 1 1/16" | 5/8" | 75 | 140 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 1 1/4" | 1 3/8" | 1 3/8" | 1/4" | __ | 1 5/16" | 7/8" | 110 | 175 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 2 3/8" | 1 3/8" | 1 3/8" | 1/4" | __ | 1 5/16" | 7/8" | 180 | 350 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 5/8" | 1 1/2" | 1 1/2" | 1 1/2" | 1/4" | __ | 1 9/16" | 1 1/8" | 170 | 265 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 5/8" | 2 13/16" | 1 1/2" | 1 1/2" | 1/4" | __ | 1 9/16" | 1 1/8" | 275 | 525 | -4° to 176° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 1 5/8" | 1 11/16" | 1 11/16" | 5/16" | __ | 1 23/32" | 1 1/4" | 190 | 305 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 00000 |
| 3/4" | 3 1/8" | 1 11/16" | 1 11/16" | 5/16" | __ | 1 23/32" | 1 1/4" | 305 | 615 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1" | 2 1/4" | 2" | 2" | 5/16" | __ | 2 1/32" | 1 9/16" | 220 | 350 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 4 5/16" | 2" | 2" | 5/16" | __ | 2 1/32" | 1 9/16" | 350 | 705 | -4° to 176° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1 1/4" | 2 5/8" | 2 1/2" | 2 1/2" | 3/8" | __ | 2 9/16" | 2" | 350 | 615 | -4° to 176° | Steel, Stainless Steel | 4 | 9/32" | 0000000 | 00000 |
| 1 1/4" | 5" | 2 1/2" | 2 1/2" | 3/8" | __ | 2 9/16" | 2" | 560 | 1,200 | -4° to 176° | Steel, Stainless Steel | 4 | 9/32" | 0000000 | 000000 |
| 1 1/2" | 3" | 3" | 3" | 1/2" | __ | 3 1/16" | 2 3/8" | 490 | 900 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 1 1/2" | 5 11/16" | 3" | 3" | 1/2" | __ | 3 1/16" | 2 3/8" | 770 | 1,800 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 2" | 4" | 3 1/2" | 3 1/2" | 1/2" | __ | 3 11/16" | 3" | 855 | 1,700 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
| 2" | 7 3/4" | 3 1/2" | 3 1/2" | 1/2" | __ | 3 11/16" | 3" | 1,300 | 3,500 | -4° to 176° | Steel, Stainless Steel | 4 | 11/32" | 0000000 | 000000 |
Corrosion-Resistant Flange-Mounted Linear Ball Bearings
Round Flange
Square Flange
The bearing, housing, and balls of these mounted bearings are stainless steel for excellent corrosion resistance. The flanged housing is good for vertical linear motion applications. All bearings are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.
For technical drawings and 3-D models, click on a part number.
Overall | Flange | Load Capacity, lbs. | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Thick. | OD | Bolt Circle Dia. | OD | Dynamic | Static | Temperature Range, °F | For Shaft Material | No. of | Dia. | Each | |
Fixed Alignment | |||||||||||||||
440C Stainless Steel Bearings with Round Flanged Housing | |||||||||||||||
| 3/8" | 7/8" | 1 1/2" | 1 1/2" | 1/4" | 1 1/2" | 1 1/16" | 5/8" | 50 | 70 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 000000 |
| 3/8" | 1 5/8" | 1 1/2" | 1 1/2" | 1/4" | 1 1/2" | 1 1/16" | 5/8" | 75 | 140 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 000000 |
| 1/2" | 1 1/4" | 1 3/4" | 1 3/4" | 1/4" | 1 3/4" | 1 5/16" | 7/8" | 110 | 175 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 2 3/8" | 1 3/4" | 1 3/4" | 1/4" | 1 3/4" | 1 5/16" | 7/8" | 180 | 350 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 000000 |
| 3/4" | 1 5/8" | 2 3/16" | 2 3/16" | 5/16" | 2 3/16" | 1 23/32" | 1 1/4" | 190 | 305 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 3/4" | 3 1/8" | 2 3/16" | 2 3/16" | 5/16" | 2 3/16" | 1 23/32" | 1 1/4" | 305 | 615 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1" | 2 1/4" | 2 1/2" | 2 1/2" | 5/16" | 2 1/2" | 2 1/32" | 1 9/16" | 220 | 350 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1" | 4 5/16" | 2 1/2" | 2 1/2" | 5/16" | 2 1/2" | 2 1/32" | 1 9/16" | 350 | 705 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
440C Stainless Steel Bearings with Square Flanged Housing | |||||||||||||||
| 3/8" | 7/8" | 1 1/4" | 1 1/4" | 1/4" | __ | 1 1/16" | 5/8" | 50 | 70 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 1/2" | 1 1/4" | 1 3/8" | 1 3/8" | 1/4" | __ | 1 5/16" | 7/8" | 110 | 175 | -4° to 248° | Steel, Stainless Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 1 5/8" | 1 11/16" | 1 11/16" | 5/16" | __ | 1 23/32" | 1 1/4" | 190 | 305 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
| 1" | 2 1/4" | 2" | 2" | 5/16" | __ | 2 1/32" | 1 9/16" | 220 | 350 | -4° to 248° | Steel, Stainless Steel | 4 | 7/32" | 0000000 | 000000 |
Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings. All are self-aligning to compensate for shaft misalignment and are for use with round end-supported shafts. Note: Not for use with bare aluminum or chrome-plated shafts.
Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 0.5° Misalignment Capability | |||||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 0.0005" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 0000000 |
| 3/8" | 0.0015" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 000000 |
| 1/2" | 0.0005" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 00000 |
| 1/2" | 0.0005" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1/2" | 0.0015" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 00000 |
| 1/2" | 0.0015" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1" | 0.0005" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0005" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1 1/4" | 0.0005" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
| 1 1/4" | 0.0015" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
High-Speed Flange-Mounted Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. The flange-mount design is good for vertical linear motion applications. Bearings are for use with round end-supported shafts and are self-aligning to compensate for shaft misalignment. End seals keep contaminants out.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 1 5/16" | 1 1/4" | 1 1/4" | 3/16" | 1 27/32" | 7/8" | 150 lbs. @ 100 fpm | 1,600 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 000000 |
| 1/2" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 2 3/8" | 1 1/4" | 300 lbs. @ 100 fpm | 3,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 29/32" | 1 3/4" | 600 lbs. @ 100 fpm | 6,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3 31/32" | 2 1/4" | 1,000 lbs. @ 100 fpm | 11,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 00000 |
| 1 1/4" | 3 5/8" | 3" | 3" | 1/2" | 5 1/8" | 2 1/2" | 1,500 lbs. @ 100 fpm | 16,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 000000 |
Mounted Linear Bearings for Spline Shafts
A flanged housing with mounting holes connects these bearings directly to your system. They have a grooved inner diameter that's designed to work with spline shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. Wide and flat, the flange is especially useful for lifting and lowering loads on vertical shafts. All are for use where shaft misalignment is unlikely.
Also known as ball splines, ball bearings run with less friction than plain bearings, so they're smoother and more precise, even at high speeds. However, they don't transmit as much torque as plain bearings. They're commonly used for robotic systems and other automated applications that require complex, fast movements.
Plain bearings have evenly sized and spaced splines for transmitting high rotational loads, such as in hydraulic systems, drivetrains, and machine tools. They don't run as smoothly or as fast as ball bearings, though. All meet ISO 14-A (formerly DIN 5463-A) to ensure they work with shafts that meet ISO 14-B.
For technical drawings and 3-D models, click on a part number.
Steel Ball Bearings with Steel Housing
Ball Bearing
For Four Splines
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Splines | For Shaft Dia., mm | Overall Lg., mm | Flange OD, mm | Bolt Circle Dia., mm | OD, mm | Max. Torque, in.-lbs. | Max. Temperature, ° F | No. of | Thread Size | Each | |
Fixed Alignment | |||||||||||
| 4 | 6 | 25 | 30 | 22 | 14 | 13 | 176° | 4 | M3 × 0.5 | 00000000 | 000000 |
| 4 | 8 | 25 | 32 | 24 | 16 | 18 | 176° | 4 | M3 × 0.5 | 00000000 | 00000 |
| 4 | 10 | 33 | 42 | 32 | 21 | 38 | 176° | 4 | M4 × 0.7 | 00000000 | 00000 |
| 4 | 18.2 | 60 | 51 | 40 | 32 | 734 | 176° | 4 | M4 × 0.7 | 00000000 | 000000 |
| 4 | 23 | 70 | 60 | 47 | 37 | 1,433 | 176° | 4 | M5 × 0.8 | 00000000 | 000000 |
| 4 | 28 | 80 | 70 | 54 | 45 | 2,557 | 176° | 4 | M6 × 1 | 00000000 | 000000 |
| 4 | 37.4 | 100 | 90 | 72 | 60 | 5,637 | 176° | 4 | M8 × 1.25 | 00000000 | 000000 |
Steel Plain Bearings with Steel Housing
Plain Bearing
For Six Splines
Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Splines | For Shaft Dia., mm | Overall Lg., mm | Flange OD, mm | Bolt Circle Dia., mm | OD, mm | Max. Torque, in.-lbs. | Max. Temperature, ° F | No. of | Thread Size | Specifications Met | Each | |
Fixed Alignment | ||||||||||||
| 6 | 20 | 40 | 52 | 38 | 28 | 911 | 212° | 4 | M5 × 0.8 | ISO 14-A, DIN 5463-A | 000000000 | 0000000 |
| 6 | 25 | 50 | 62 | 48 | 34 | 1,902 | 212° | 4 | M6 × 1 | ISO 14-A, DIN 5463-A | 000000000 | 000000 |
| 6 | 32 | 60 | 70 | 56 | 42 | 3,301 | 212° | 4 | M6 × 1 | ISO 14-A, DIN 5463-A | 000000000 | 000000 |
Steel Spline Shafts
Splined on Both Ends
Splined End × Step-Down End
Four Splines
Six Splines
Step | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia., mm | Lg., mm | Spline Lg., mm | End Type | Dia., mm | Lg., mm | Specifications Met | Each | |
4 Splines | ||||||||
| 6 | 150 | 150 | Splined End × Splined End | __ | __ | __ | 00000000 | 0000000 |
| 8 | 150 | 150 | Splined End × Splined End | __ | __ | __ | 00000000 | 00000 |
| 10 | 200 | 200 | Splined End × Splined End | __ | __ | __ | 00000000 | 00000 |
| 18.2 | 350 | 200 | Splined End × Step-Down End | 15 | 150 | __ | 00000000 | 000000 |
| 23 | 350 | 200 | Splined End × Step-Down End | 20 | 150 | __ | 00000000 | 000000 |
| 28 | 450 | 300 | Splined End × Step-Down End | 25 | 150 | __ | 00000000 | 000000 |
| 37.4 | 550 | 400 | Splined End × Step-Down End | 30 | 150 | __ | 00000000 | 000000 |
6 Splines | ||||||||
| 20 | 1,000 | 1,000 | Splined End × Splined End | __ | __ | ISO 14-B, DIN 5463-B | 000000000 | 000000 |
| 25 | 1,000 | 1,000 | Splined End × Splined End | __ | __ | ISO 14-B, DIN 5463-B | 000000000 | 000000 |
| 32 | 1,000 | 1,000 | Splined End × Splined End | __ | __ | ISO 14-B, DIN 5463-B | 000000000 | 000000 |