How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Stainless Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides. Cap flanges are also known as blind flanges.
Forged flanges have better strength than cast flanges. 304 stainless steel flanges offer very good corrosion resistance, and 316 stainless steel flanges have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN EN 1092-1
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | DN Flange Size | Construction | Flange OD, mm | For Bolt Dia., mm | Dia., mm | No. of | Bolt Circle Dia., mm | Max. Pressure | Max. Steam Pressure | Each | |
304/304L Stainless Steel | |||||||||||
| 1 | 25 | Seamless | 115 | 12 | 14 | 4 | 85 | 230 psi @ 72° F | 125 psi @ 300° F | 0000000 | 0000000 |
316/316L Stainless Steel | |||||||||||
| 1 | 25 | Seamless | 115 | 12 | 14 | 4 | 85 | 230 psi @ 72° F | 145 psi @ 300° F | 0000000 | 000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN EN 1092-1
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN EN 1092-1
Low-Pressure Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line. Flanges are for use with low-pressure applications in noncorrosive environments.
Butt-weld flanges are also known as weld-neck flanges. The flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
Slip-on weld flanges have no internal stop. Slide a pipe through the flange and weld on both sides.
Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN 2633, DIN 86030, DIN EN 1092-1, DIN 2527
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | DN Flange Size | Wall Thick., mm | Flange OD, mm | For Bolt Dia., mm | Dia. | No. of | Bolt Circle Dia., mm | Construction | Max. Pressure | Max. Steam Pressure | Each | |
| 1 | 25 | 3.378 | 115 | 12 | 14 | 4 | 85 | Welded | 230 psi @ 72° F | 180 psi @ 300° F | 0000000 | 000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN 2633, DIN 86030, DIN EN 1092-1, DIN 2527
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | DN Flange Size | Flange OD, mm | For Bolt Dia., mm | Dia. | No. of | Bolt Circle Dia., mm | Max. Pressure | Max. Steam Pressure | Each | |
| 1 | 25 | 115 | 12 | 14 | 4 | 85 | 230 psi @ 72° F | 180 psi @ 300° F | 0000000 | 000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: DIN 2633, DIN 86030, DIN EN 1092-1, DIN 2527
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | DN Flange Size | Flange OD, mm | For Bolt Dia., mm | Dia. | No. of | Bolt Circle Dia., mm | Max. Pressure | Max. Steam Pressure | Each | |
| 1 | 25 | 115 | 12 | 14 | 4 | 85 | 230 psi @ 72° F | 180 psi @ 300° F | 0000000 | 000000 |