How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
CPVC Pipe Flanges for Hot Water
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (75%), Water,
Fixed Cap Flanges: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (75%), Water - Pressure Class: 150
- Maximum Temperature: 200° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
- Fittings: Use Schedule 80 CPVC Plastic
Made of CPVC, these flanges can handle high temperatures up to 200° F. They meet NSF/ANSI Standard 61 for drinking water. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Also known as Pressure Class 150 flanges, they have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. Flanges have good corrosion resistance. They meet ASTM D1784 specifications and testing requirements for material quality. They are comparable to Corzan.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local regulatory limits on VOCs (Volatile Organic Compounds).
For technical drawings and 3-D models, click on a part number.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 00000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 00000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 3/32" | Light Gray | 00000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 00000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Light Gray | 00000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 00000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 00000000 | 00000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 00000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Light Gray | 00000000 | 00000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | Light Gray | 00000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 11/16" | Light Gray | 00000000 | 000000 |
Pipe Cement for Max. Pipe Size 6 | 00000000 | Each | 000000 |
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 00000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 00000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Light Gray | 00000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 00000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Light Gray | 00000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 00000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 00000000 | 00000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 00000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Light Gray | 00000000 | 00000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | Light Gray | 00000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | Light Gray | 00000000 | 000000 |
Pipe Cement for Max. Pipe Size 6 | 00000000 | Each | 000000 |
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Bolt Hole | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Maximum Temperature | Each | |
1/2 | 27/32" | 0.825" | 0.147" | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 200° F | 00000000 | 000000 |
3/4 | 1 3/64" | 0.981" | 0.154" | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 200° F | 00000000 | 00000 |
1 | 1 5/16" | 1.28" | 0.179" | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Light Gray | 200° F | 00000000 | 00000 |
1 1/4 | 1 21/32" | 1.602" | 0.191" | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 200° F | 00000000 | 00000 |
1 1/2 | 1 29/32" | 1.868" | 0.2" | 5" | 1/2" | 3/4" | 4 | 3 7/8" | Light Gray | 200° F | 00000000 | 00000 |
2 | 2 3/8" | 2.3" | 0.218" | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 200° F | 00000000 | 00000 |
2 1/2 | 2 7/8" | 2.822" | 0.276" | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 200° F | 00000000 | 000000 |
3 | 3 1/2" | 3.475" | 0.3" | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 200° F | 00000000 | 000000 |
4 | 4 1/2" | 4.365" | 0.337" | 9" | 5/8" | 7/8" | 8 | 7 1/2" | Light Gray | 200° F | 00000000 | 000000 |
6 | 6 5/8" | 6.535" | 0.432" | 11" | 3/4" | 7/8" | 8 | 9 1/2" | Light Gray | 200° F | 00000000 | 000000 |
Pipe Cement for Max. Pipe Size 6 | 00000000 | Each | 000000 |
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns.
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 0000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 0000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Light Gray | 0000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 0000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Light Gray | 0000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 0000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 00000000 | 000000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 0000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Light Gray | 0000000 | 00000 |
Non-Hardening Thread Sealant | 000000 | Each | 000000 |
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns.
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 00000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 00000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Light Gray | 00000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 00000000 | 00000 |
1 1/2 | 5" | 1/2" | 3/4" | 4 | 3 7/8" | Light Gray | 00000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 00000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 00000000 | 000000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 00000000 | 000000 |
4 | 9" | 5/8" | 7/8" | 8 | 7 1/2" | Light Gray | 00000000 | 000000 |
Non-Hardening Thread Sealant | 000000 | Each | 000000 |
Cap flanges are also known as blind flanges.
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Light Gray | 00000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Light Gray | 00000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Light Gray | 00000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | Light Gray | 00000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Light Gray | 00000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Light Gray | 00000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | Light Gray | 00000000 | 000000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Light Gray | 00000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Light Gray | 00000000 | 00000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | Light Gray | 00000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | Light Gray | 00000000 | 000000 |
UV-Resistant Polypropylene Pipe Flanges for Chemicals
- For Use With: Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide, Sulfuric Acid (30%), Water
- Temperature Range: See Table
- Pipe Nipples and Pipe: Use Schedule 80 Polypropylene Plastic
- Fittings: Use Schedule 80 Polypropylene Plastic
Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. Flanges have the chemical resistance to stand up to a wide variety of acids, solvents, and other harsh substances. Also known as Pressure Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male pipe threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flanged Connection Surface | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Temperature Range, °F | Each | |
NPT Threads | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1/2 | Flat | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
3/4 | Flat | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 00000 |
1 | Flat | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 000000000 | 00000 |
1 1/4 | Flat | 4 1/2" | 1/2" | 5/8" | 4 | 3 1/2" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
1 1/2 | Flat | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 000000000 | 00000 |
2 | Flat | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 000000000 | 00000 |
3 | Flat | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 000000000 | 00000 |
4 | Flat | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 000000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Cap flanges are also known as blind flanges.
Pipe Size | Flanged Connection Surface | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Temperature Range, °F | Each | |
1/2 | Raised | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 0000000 |
3/4 | Raised | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
1 | Raised | 4 1/4" | 1/2" | 5/8" | 4 | 3" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
1 1/4 | Raised | 4 1/2" | 1/2" | 5/8" | 4 | 3 1/2" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
1 1/2 | Raised | 5" | 1/2" | 5/8" | 4 | 3 7/8" | Polypropylene Plastic | Black | Not Rated | 0° to 180° | 000000000 | 000000 |
2 | Flat | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 00000000 | 00000 |
3 | Flat | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Polypropylene Plastic | Black | Not Rated | 0° to 150° | 00000000 | 00000 |
4 | Raised | 8 7/8" | 5/8" | 3/4" | 8 | 7 1/2" | Polypropylene Plastic | Black | Not Rated | 32° to 120° | 00000000 | 000000 |
Flame-Retardant PVDF Pipe Flanges for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Temperature Range: 40° to 280° F
- Specifications Met: ASTM D3222, UL 94 V-0
- Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
- Fittings: Use Schedule 80 PVDF Plastic
Flanges meet UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Pressure Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns. Flanges meet ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flanged Connection Surface | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Each | |
Fixed Flange, Female Threaded × Flanged | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NPT Threads | |||||||||||
1/2 | Flat | 3 1/2" | 1/2" | 5/8" | 4 | 2 5/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 0000000 |
3/4 | Flat | 3 7/8" | 1/2" | 5/8" | 4 | 2 11/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
1 | Flat | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/32" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
1 1/2 | Flat | 5" | 1/2" | 5/8" | 4 | 3 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
2 | Raised | 6" | 5/8" | 3/4" | 4 | 4 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Easy-Access CPVC Pipe Flanges for Chemicals
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Hydrochloric Acid, Phosphoric Acid, Salt Water, Sodium Hydroxide, Sulfuric Acid (80%), Water
- Temperature Range: 32° to 200° F
- Specifications Met: ASTM D1784
- Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
The grooved ends on these flanges connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. They are also known as Victaulic flanges. Bolt two same-size flanges together with a gasket (sold separately). Flanges are CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are comparable to Corzan. Flanges meet ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Each | |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | CPVC Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | CPVC Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | CPVC Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
Clamp connectors let you connect CPVC grooved-end pipe fittings and pipe.
For Pipe Size | For Pipe OD | Material | Color | Gasket Material | Max. Pressure | Specifications Met | Each | |
2 | 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
3 | 3 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 00000 |
4 | 4 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 00000 |
Clamp adapters let you connect CPVC grooved-end pipe fittings and pipe to metal grooved-end pipe fittings and pipe.
Clamp reducers allow you to connect CPVC grooved-end pipe fittings and pipe and transition from a larger pipe size to a smaller pipe size.
For Pipe Size | For Pipe OD | Material | Color | Gasket Material | Max. Pressure | Specifications Met | Each | |
3 × 2 | 3 1/2" × 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
4 × 2 | 4 1/2" × 2 3/8" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |
4 × 3 | 4 1/2" × 3 1/2" | Enamel-Coated Iron | Orange | EPDM Rubber | 300 psi @ 72° F | ASTM D1784, ASTM F441 | 0000000 | 000000 |