We will reply to your message within an hour.
The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.
These expansion joints have a double-bulb design for extra movement and vibration absorption.
Connect different pipe sizes in your line while adding a point of flexibility between them. These expansion joints absorb movement between two connected pipes to reduce stress, vibration, and noise.
Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.
The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
Made of EPDM rubber, these gaskets also resist salt water.
Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.
Made from a blend of graphite and Buna-N rubber, these gaskets withstand temperatures up to 650° F.
In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.
These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.
Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.
Also resistant to salt water.
These neoprene gaskets also resist salts.
The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.
Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.
Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.
Resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Slide these seals over roof flashings for added protection and to create an extra-watertight seal without the need for caulk. They’re also known as storm or rain collars.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Attach the cuff end with a hose clamp and screw mount the flange end.
Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out.
Attach the cuff end with a hose clamp, and screw mount the flange end.
Slide these bellows over square rods and shafts.
Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.
Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.