Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Use these heavy duty forged flanges for high-pressure applications.

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Also known as ANSI flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

For excellent strength in extreme-pressure applications, choose these heavy duty Pressure Class 1500 flanges.

Use these fittings for low-pressure applications in noncorrosive environments.

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Made of FDA-listed material for use with food and beverage.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

Also known as Gore GR.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

Also resistant to salt water.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.