Pipe Size Pipe Size | Show |
|---|
Material Material |
|---|
|
|
Connection Style Connection Style |
|---|
 |
| Flanged |
 |
| Threaded |
 |
| Slip-On Weld |
 |
| Butt Weld |
 |
| Socket Connect |
 |
| Stub End |
For Pipe Material For Pipe Material |
|---|
|
For Use With For Use With |
|---|
System of Measurement System of Measurement |
|---|
|
Maximum Steam Pressure Maximum Steam Pressure |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Connection Type Connection Type |
|---|
 | Pipe |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Stainless Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.
304 stainless steel flanges offer very good corrosion resistance, and 316 stainless steel flanges have excellent corrosion resistance.
Forged flanges have better strength than cast flanges.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides. Socket-connect flanges have an internal stop that supports the pipe when welding and prevents the pipe from sliding all the way through.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting. Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met: ASTM A182, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met
4-8 pipe size: ASTM 182
All other pipe sizes: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met: ASTM A182, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met: ASTM A182, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
Flanges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bolt Hole | Thin-Wall Straight Adapters | Standard-Wall Straight Adapters | ||||||||||
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | Each | Each | |||
304/304L Stainless Steel | ||||||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 230 psi @ 72° F | 000000000 | 0000000 | 000000000 | 0000000 | 000000000 | 0000000 |
316/316L Stainless Steel | ||||||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 230 psi @ 72° F | 000000000 | 000000 | 000000000 | 000000 | 000000000 | 000000 |
- For Use With: Air, Water, Oil, Natural Gas
- Pressure Class: 150
- Specifications Met: ASTM A182, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Fittings: Use schedule 40 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
Standard-Wall Butt-Weld Stainless Steel Unthreaded Pipe Fittings
Also known as Schedule 40 fittings, these have thicker walls than our thin-wall stainless steel unthreaded butt-weld fittings. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Water
- Specifications Met: ASME B16.9, ASTM A403, MSS SP-43
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Flanges: Use Class 150 stainless steel
High-Pressure Stainless Steel Unthreaded Pipe Flanges
Use these heavy duty forged flanges for high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of same size together with a gasket (sold separately) to create an access point in a pipe line.
304 stainless steel flanges offer very good corrosion resistance. 316 stainless steel flanges have excellent corrosion resistance.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting. Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Thin-Wall Butt-Weld Stainless Steel Unthreaded Pipe Fittings
Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Water
- Specifications Met: ASME B16.9, ASTM A403, MSS SP-43
- Pipe: Use Schedule 10 stainless steel
Low-Pressure Stainless Steel Threaded Pipe Flanges
Also known as Pressure Class 150 flanges, these are designed for low-pressure pipe applications. Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point within a line.
304 stainless steel flanges have very good corrosion resistance. 316 stainless steel flanges have excellent corrosion resistance.
Forged flanges have better strength than cast flanges. They are also called ANSI flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: 150
- Specifications Met:
Alloy 20 flanges: ASME B16.5
All other flanges: ASME B16.5, ASTM A182 - Fittings: Use Class 150 stainless steel
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
High-Pressure Stainless Steel Threaded Pipe Flanges
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A182, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 80 stainless steel
For technical drawings and 3-D models, click on a part number.
Low-Pressure Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line. Flanges are for use with low-pressure applications in noncorrosive environments.
Butt-weld flanges are also known as weld-neck flanges. The flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
Slip-on weld flanges have no internal stop. Slide a pipe through the flange and weld on both sides.
Socket-connect flanges have an internal stop that supports the pipe when welding and prevents the pipe from sliding all the way through.
Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: See table
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Wall Thick. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Pressure Class | Construction | Max. Pressure | Max. Steam Pressure | Certification | Specifications Met | Each | |
| 8 | 0.322" | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 | Seamless | 285 psi @ 72° F | 150 psi @ 300° F | Material Certificate with Traceable Lot Number and Test Report | ASME B16.5, ASTM A105, MSS SP-25 | 000000000 | 0000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: See table
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Pressure Class | Max. Pressure | Max. Steam Pressure | Certification | Specifications Met | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 | 285 psi @ 72° F | 150 psi @ 300° F | Material Certificate with Traceable Lot Number and Test Report | ASME B16.5, ASTM A105, MSS SP-25 | 000000000 | 0000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: 150
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Specifications Met | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 285 psi @ 72° F | 150 psi @ 300° F | ASTM A105, MSS SP-25 | 000000000 | 0000000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: 150
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
- Specifications Met: MSS SP-25, ASTM A105, ASME B16.5
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Pressure Class | Max. Pressure | Max. Steam Pressure | Specifications Met | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 | 285 psi @ 72° F | 150 psi @ 300° F | ASME B16.5, ASTM A105, MSS SP-25 | 000000000 | 0000000 |
Standard-Wall Butt-Weld Steel Unthreaded Pipe Fittings
Butt-weld fittings allow for a smooth connection that provides maximum flow. They have beveled ends that, when flush to pipe, create a trough for a strong, permanent weld. Fittings are also known as Schedule 40. They are for use in noncorrosive environments.
Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Steam, Oil, Water, Natural Gas
- Specifications Met: ASTM A234, ASME B16.9
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Flanges: Use Class 150 steel
High-Pressure Steel Unthreaded Pipe Flanges
Forged for extra strength, these heavy duty flanges can withstand high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
Socket-connect flanges have an internal stop that supports the pipe when welding and prevents the pipe from sliding all the way through.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting.
Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Wall Thick. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | |||||||||||
| 8 | 0.5" | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | ||||||||||
| 8 | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Specifications Met | Each | |
Pressure Class 300 | |||||||||||
| 8 | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | ASME B16.5, ASTM A105 | 00000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | ||||||||||
| 8 | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 0000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | ||||||||||
| 8 | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 0000000 |
Low-Pressure Steel Threaded Pipe Flanges
Use these flanges for low-pressure applications in noncorrosive environments. Bolt two flanges of the same size together with a gasket (sold separately) to create an access point within a line.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: 150
- Specifications Met:
NPT: ASME B16.5, ASTM A105, MSS SP-25
BSPT: ASTM A105 - Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Class 125 or 150 iron and steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT | ||||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 285 psi @ 72° F | 230 psi @ 300° F | Steel | 000000000 | 0000000 |
FM-Approved Low-Pressure Cast Iron Threaded Pipe Flanges
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met:
3/4 Pipe Size: ASME B1.20.1, ASME B16.1, ASTM A126, FM Approved
All other sizes: ASME B1.20.1, ASME B16.1, ASTM A126, FM Approved, UL Listed - Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Class 125 or 150 iron and steel
Suitable for use in fire-protection applications, these flanges are brittle and can be quickly opened with the strike of a sledge hammer. Bolt two flanges of the same size together with a gasket (sold separately) to create an access point within a line. Use in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT | ||||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 125 psi @ 72° F | 125 psi @ 350° F | Black-Coated Iron | 000000000 | 0000000 |
Low-Pressure Galvanized Steel Threaded Pipe Flanges
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: 150
- Specifications Met: ASTM A123, ASTM A105, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 40 galvanized steel
- Fittings: Use Class 125 or 150 galvanized iron and galvanized steel
The galvanized finish on these flanges provides fair corrosion resistance. Also known as Pressure Class 150 flanges, they are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Each | |
NPT | |||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 285 psi @ 72° F | 150 psi @ 300° F | 00000000 | 0000000 |
Medium-Pressure Steel Threaded Pipe Flanges
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 300 or Schedule 80 iron and steel
With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are also known as Pressure Class 300 or Pressure Class 600 flanges. Use in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT | ||||||||||
Pressure Class 300 | ||||||||||
| 8 | 15" | 7/8" | 1" | 12 | 13" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 0000000 |
Low-Pressure Aluminum Threaded Pipe Flanges
Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are aluminum, which is lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met:
Pipe Size 1-6: ASME B16.1 - Fittings: Use Class 150 aluminum
- Pipe Nipples and Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
NPT | ||||||||
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 0000000 |
Aluminum Unthreaded Pipe Flanges
Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are aluminum, which is lightweight with good corrosion resistance.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides. Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Oil, Water
- Pressure Class : 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
| 8 | 13 1/2" | 3/4" | 3/4" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Oil, Water
- Pressure Class : 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Air, Oil, Water
- Pressure Class : 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 0000000 |
Thick-Wall Plastic Pipe Flanges for Water
- For Use With: Drinking Water, Water
- Pressure Class: 150
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 PVC Plastic
- Fittings: Use Schedule 80 PVC Plastic
Also known as Pressure Class 150 flanges, these flanges have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They meet NSF/ANSI 61 for drinking water. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. All are PVC, which has good corrosion resistance. Some are also glass filled for extra durability. They meet ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections.
To prevent leaks in threaded connections, apply a sealant to the male threads. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections.
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Cap flanges are also known as blind flanges.
Bolt Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. | Bolt Circle Dia. | Material | Color | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | PVC Plastic | Dark Gray | 00000000 | 0000000 |
CPVC Pipe Flanges for Hot Water
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (75%), Water,
Fixed Cap Flanges: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (75%), Water - Pressure Class: 150
- Maximum Temperature: 200° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 80 CPVC Plastic
- Fittings: Use Schedule 80 CPVC Plastic
Made of CPVC, these flanges can handle high temperatures up to 200° F. They meet NSF/ANSI Standard 61 for drinking water. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Also known as Pressure Class 150 flanges, they have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. Flanges have good corrosion resistance. They meet ASTM D1784 specifications and testing requirements for material quality. They are comparable to Corzan.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local regulatory limits on VOCs (Volatile Organic Compounds).
For technical drawings and 3-D models, click on a part number.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 11/16" | Light Gray | 00000000 | 0000000 |
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | Light Gray | 00000000 | 0000000 |
Cap flanges are also known as blind flanges.
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Color | Each | |
| 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | Light Gray | 00000000 | 0000000 |