How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Nuts, Materials, and Finishes
More
Low-Pressure Steel Unthreaded Pipe Flanges
Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line. Flanges are for use with low-pressure applications in noncorrosive environments.
Slip-on weld flanges have no internal stop. Slide a pipe through the flange and weld on both sides.
Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: See table
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: See Table
Bolt Hole | For Fitting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Schedule | Material | Specifications Met | Each | |
1 | 4 59/64" | 5/8" | 0.748" | 4 | 3 35/64" | Not Rated | Not Rated | 40 | Iron, Steel | ASTM A105, JIS B 2220 | 0000000 | 000000 |
1 1/2 | 5 33/64" | 5/8" | 0.748" | 4 | 4 9/64" | Not Rated | Not Rated | 40 | Iron, Steel | ASTM A105, JIS B 2220 | 0000000 | 00000 |
2 | 6 7/64" | 5/8" | 0.748" | 4 | 4 23/32" | Not Rated | Not Rated | 40 | Iron, Steel | ASTM A105, JIS B 2220 | 0000000 | 00000 |
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Fittings: Use Schedule 40 iron or steel
JIS High-Strength Steel Flange Nuts
These metric nuts meet JIS (Japanese Industrial Standard) B 1190. They have a flange that distributes pressure where the nut meets the material surface, eliminating the need for a separate washer. About 25% stronger than medium-strength steel flange nuts, they're comparable in strength to Class 10.9 bolts. Height includes the flange.
When choosing your finish, consider your environment. Zinc-plated nuts have a layer of zinc that protects the steel under it from rust, extending the life of the nuts. A black-phosphate finish shields nuts from rusting, even amid oil and grease.
For technical drawings and 3-D models, click on a part number.
Thread | Flange | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Wd., mm | Ht., mm | Dia., mm | Thick., mm | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 10 | |||||||||
M5 | 0.8 | 8 | 5 | 11.8 | 0.7 | JIS B 1190 | 50 | 000000000 | 00000 |
M6 | 1 | 10 | 6 | 14 | 0.8 | JIS B 1190 | 100 | 000000000 | 0000 |
M8 | 1.25 | 12 | 8 | 17.5 | 1 | JIS B 1190 | 50 | 000000000 | 0000 |
M10 | 1 | 14 | 10 | 21 | 1.2 | JIS B 1190 | 1 | 000000000 | 0000 |
M10 | 1.25 | 14 | 10 | 21 | 1.2 | JIS B 1190 | 10 | 000000000 | 00000 |
M12 | 1.25 | 17 | 11.5 | 25 | 1.4 | JIS B 1190 | 25 | 000000000 | 0000 |
Black-Phosphate Steel—Class 10 | |||||||||
M6 | 1 | 10 | 6 | 14 | 0.8 | JIS B 1190 | 100 | 000000000 | 00000 |
M8 | 1.25 | 12 | 8 | 17.5 | 1.1 | JIS B 1190 | 100 | 000000000 | 00000 |
M10 | 1.25 | 14 | 10 | 21 | 1.2 | JIS B 1190 | 50 | 000000000 | 00000 |
JIS Medium-Strength Steel Flange Nuts
Made to Japanese Industrial Standards, these nuts fasten most Japanese machinery and equipment without a washer. Their flange distributes pressure where the nut meets the material surface, so there’s no need for a washer. Zinc plated, these nuts won’t rust.
For technical drawings and 3-D models, click on a part number.
Thread | Flange | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Width, mm | Height, mm | Diameter, mm | Thickness, mm | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel—Class 8 | |||||||||
M3 | 0.5 | 5.5 | 3.7 | 8 | 0.6 | JIS B 1190 | 100 | 000000000 | 000000 |
M4 | 0.7 | 7 | 4.2 | 10.5 | 0.6 | JIS B 1190 | 100 | 000000000 | 00000 |
M5 | 0.8 | 8 | 5 | 11.8 | 0.7 | JIS B 1190 | 100 | 000000000 | 00000 |
M6 | 1 | 10 | 6 | 14 | 0.8 | JIS B 1190 | 100 | 000000000 | 00000 |
M8 | 1 | 12 | 8 | 17.5 | 1.1 | JIS B 1190 | 10 | 000000000 | 00000 |
M8 | 1.25 | 12 | 8 | 17.5 | 1.1 | JIS B 1190 | 25 | 000000000 | 00000 |
M10 | 1 | 14 | 10 | 21 | 1.2 | JIS B 1190 | 10 | 000000000 | 00000 |
M10 | 1.25 | 14 | 10 | 21 | 1.2 | JIS B 1190 | 5 | 000000000 | 0000 |
M12 | 1.25 | 17 | 11.5 | 25 | 1.4 | JIS B 1190 | 5 | 000000000 | 0000 |
M12 | 1.75 | 17 | 11.5 | 25 | 1.4 | JIS B 1190 | 5 | 000000000 | 0000 |